Height Reports Samples For Students

Report about Relationship between the age, height, and body mass

Abstract
This research investigates the nature of the relationship between the age, height and body weight. The nature of the relationship between these three variables determines a person’s body health and fitness according to professionals. Therefore, this research will aim at ascertaining the nature of the relationship between the variables and, thereafter, a deduction of its relativity to a person’ health status will be made.
In the literature review, some authors bring in the gender aspect while others do not fully agree that a perfect ratio between body mass and height indicates good health. This ratio is referred ...

Abstract

The experiment aimed at explaining the interaction of the molecules at different pressure, temperature and volumes. At low temperatures, the volume of the gas was low while at high temperatures, the volume of gas increased. The experiment successfully determined the value of absolute temperature using the Charles’s Law as 202.75OC which was lower than the theoretical value. The experiment also successfully verified the Boyle’s Law. The interaction of temperature and the volume of the fluid can be concluded to be directly proportional with an increase in temperature leading to increase in volume. On the other hand, the ...

Lab Report: Renewable Energy Lighting System Design

Introduction
Communities around the country as well as around the world are setting sustainable development goals. Twidell and Weir (2006, 2) define sustainable development in general terms as “living, producing and consuming in a manner that meets the needs of the present without compromising the ability of future generations to meet their needs.” Renewable energy sources are critical for sustainability. Renewable sources like wind and sun are different from fossil fuels because intense human labor is not necessary. Renewable resources do not negatively impact the environment which is also an important factor for reaching sustainability goals. Twiddel and Weir ( ...

Lab Report

Lab Report to Investigate the Effects of Indole acetic Acid On The Tip Of The Coleoptiles.
INTRODUCTION
The purpose of the lab report is to examine the effect of the artificial auxin hormone on the stems of the coleoptiles. Coleoptiles are protective sheath which encloses the growing shoot of the monocot seedlings. The coleoptiles have high concentration of the hormone auxin which acts as a natural growth regulators. SONI (2010The source of the auxin is in the tip of the growing coleoptiles. This implies that when the tip is removed, the source of the auxin is also removed hence ...

Introduction

The building to be assessed in this paper is the Menards hardware store located at 3210 North Clairemont Avenue, Eau Claire, Wisconsin. The store belongs to the Menards hardware chain stores. It stocks essential hardware supplies such as nails, gardening tools, light fixtures, furniture as well as groceries. The primary users of this building are shoppers and employees.

Risk Analysis

The likely perpetrators of violence at this site are domestic and international terrorists and individuals. The terrorists are likely to use explosives while individuals are likely to use guns such as shot guns or automatic rifles. The target victims are likely ...

Abstract

This report acknowledges the various properties associated with plastics and their behaviour when subjected to different conditions of loading. This experiment investigates the mechanical behaviour of five types of polymers which include Silly putty, six pack rings, nylon cable ties, Ply Doh, and Splat Ball. The properties of plastics can be altered to introduce cross-links and thereby introducing constraints to prevent sliding or rotation. The findings of the experiment concluded that temperatures, speed of loading and chemical composition of plastics are determinants of their mechanical behaviours.

Introduction

Polymers play a critical part in day-to-day life as manifested in the numerous ...

There are several ways to improve the volley ball serve and increase the likelihood that it will result in an ace or a serve that cannot be returned and results in a point for the offensive team. The main goal when seeking to increase the likelihood that a serve results in an ace is to minimize the time the ball spends in the air and increase the speed of the ball. This will reduce the amount of time the opposing team has to react, forcing them to react faster than their normal reaction time would dictate. In this analysis ...

Economic Report about Current Commercial Gasifiers

GE Energy Gasifier
GE Energy Gasifier uses the entrained flow, coal-water slurry feed, refractory lined slag and oxygen blown technology. The manufacturers at GE Energy have two variants, one with a radiant cooler and another full quench gasifier. Their products use a wide variety of fuels like low rank coals, pet coke, bituminous coal and other blends of pet coke. The design of GE Energy Gasifier emphasizes on operational eficiency. This is achieved through optimization of heat recovery and production of carbon monoxide. As espoused earlier, the GE Energy Gasifier predominantly uses the direct quench system. This design is ...

Analysis and potential system designs

Introduction
Mobile applications are becoming an indispensable development for most people and smart phone users. The rate of mobile use and applications has gone so high such that there are many mobile applications which are in use, in the world. The healthcare sector is one area that has benefited from the use of mobile phones. There are many mobile applications which are being used and are utilized in the healthcare sector. This paper will focus on a mobile application that is used to improve the communication of body status of patients and doctors. The mobile application is used to ...

Prototype Description

The glider prototype has a standard tail and is going to include regular wings made of paper that will act as a representative of an actual glider. Two pieces of wood of the same length are joined to meet at a ninety degree angle. Another two pieces of woods are added to support the glide structure.

Construction

The Balsa glider prototype is constructed using four pieces of wood. Two pieces wood of the same length (each 30cm in length) are attached together at an angle ninety degrees. The two remaining pieces are placed variably to cross each other and meet ...

Ergonomics plays an important role towards the contribution of better efficiency at the workplace and even in everyday life. May products are ergonomically safe and contribute towards better efficiency; however, some products may cause hindrance towards attaining efficiency because of their poor design. Most of the times, people are unable to identify the cause of decreased efficiency; therefore, ergonomics is a science that is employed commonly at the workplace. A very basic example of an ergonomic product would be a desk chair. It is important to recognize that one chair may not be the ideal chair for every person. ...

Equipment

- Flow Demonstration Channel as shown in Figure 2
- Broad-crested weir
- Water
- Screw driver

Procedure

- Slope indicator was adjusted to the zero mark.
- All the dials were put off.
- The apparatus was plugged in and leveled
- Tailgate was made horizontal by adjusting knob near the control panel
- Dimensions of the rectangular notched weir on data sheet provided were measured and record
- The weir was placed in the channel, and attached with screws
- Small and large orifice knobs were opened slightly
- The pump was turned on
- Small orifice knob ...

This jack is operated by turning the handle in a clockwise direction. The action of the screw then makes the load rise (Cleghorn, 2010). A research was carried out on the weights of most family cars to determine the maximum weight the jack can lift. The average weight of a family car according to the research is about 1660kg, much of this weight being on the engine side, about two thirds. The jack will support a load of up to 610kg. With a safety factor of 1.63, the maximum lift of the jack can be determined as follows:Maximum lift * ...

October

Cascades Tissue Group
1200 Forest St

Eau Claire, WI, United States 54703

Dear Mr. Senor,
Please find attached a report which details the results of an ergonomics assessment that was conducted at your facility in Cascades in October 2013. Also included with this report you will find a summary of some of the observations that were made during the assessment and the relevant conclusions and recommendations based on the same.

It was indeed a pleasure to serve your ergonomic consultation needs.

Sincerely,

Introduction

Ergonomics is a scientific discipline that ventures into analyzing the interactions between humans and the elements in their environment. By studying this discipline, it becomes easier to understand the importance of maintaining the correct ...

Abstract

This experiment sought to investigate the effect of substrate on activity of enzyme catalase. It was hypothesized that catalase can only influence the breakdown of hydrogen peroxide. Three test tubes were selected and labeled tube 1, tube 2, and tube 3. Catalase and hydrogen peroxide were added to tube 1; water and hydrogen peroxide were added into tube 2; and catalase and sucrose were added into tube 3. Bubble measuring 20mm was formed in tube 1 while no bubble was seen in tube 2 and tube 3. A conclusion was made that enzyme catalase can only influence the rate ...

Part 1

There are very low chances for a flood of more magnitude than that of 1990 to occur. The probability of occurrence of the 1990 flood was 0.06. This indicates that probability of occurrence of the flood in the year was substantially low. 6/100 is a substantially low frequency. This means that, probability of occurrence of a greater flooding than this is insignificantly low because it is less than six percent, hence, it is negligible. A flood of a greater magnitude than that of 1990 is unexpected; this is an important point to consider in determining what prevention measures are ...

Engineering

Abstract
The Brooklyn Bridge is probably underappreciated by most of the people who use it today but it is still an example of great engineering. The chief engineer, Roebling, designed a suspension bridge that was fifty percent longer than any other suspension bridge of the times. His design for weighting of the bridge to keep it stable when there was wind is a very important lesson for today’s suspension bridge designers. The health and safety issues of the height of the bridge and the use of the Caisson boxes have been discussed. The approximately 27 deaths that took ...

This report has been written to analyze adolescents’ health issues in Australia. It analyses the contributing factors to adolescents’ obesity issue and its impact on the family and recommendations for the nursing practice. This report targets the parents of these adolescents and the entire families to help them in dealing with such occurrences and avoiding them. It also aims at giving additional information to the nursing fraternity so that they are ready to deal with such cases and be able to provide the best health care and advice to those affected. Obesity however, not directly being a threat to ...

Introduction

Nutritional status can be defined as the balance between the amount of nutrients taken in by a living organism and the amount of nutrients spent by these organisms in the process of growth, health maintenance. In order to analyze this aspect, we will take into consideration the following attributes; level of nutrients in the body, products of metabolism and the functional processes that they regulate. Nutritional status can be measured for both individuals and populations. For accurate measurements especially those used for clinical purposes, nutritional measurements are done for individuals whereas ...

First thing, we needed to know was the measurement associated with the shear box including the height and mass, as well as cross-sectional dimensions to determine the normal force. Next thing to do was preparing a 200-gr sample of dense soil so we could compact it later into the box. The extracted sample was reckoned among the well-graded sands. The soil sample was then compacted into three equal layers such that the middle layer could be placed almost at the half height of the box where shear plane has been designed to be. A general planar view of this ...

Real time kinematic of volley ball

There is several ways to improve the volley ball serve, that is time spend on air should be reduced. Due to this there won’t be any time to react for the opponent team. This will make the opponent team to react faster than the normal one. In this analysis of kinematic of volley ball, the ball spends in air should be reduced, when the serve of volley ball is made.
In order to setup the analysis of kinematic of volley ball, we should consider several variables in the analysis. The schematic diagram will show the top view of ...

Psychology

Psychology

What one eats determines whether one gains or losses weight. Gaining weight beyond one’s age and height requirement can predispose one to overweight and even obesity. (Childhood Obesity and the Built Environment 2013) posits that improper nutrition and physical inactivity are the significant contributors to overweight and obesity among young children and students. Obesity has often been associated with morbidities like hypertension, hyperlipidemia, cardiac disease and diabetes mellitus. Thus, an obesity awareness program needs to be reviewed and integrate evidence-based approaches to management of both childhood and adulthood obesity. According to Hellmich (2013) report, 35% of Americans ...

Overview of Anthropometry

Nutrition is a very crucial aspect of health, and the decree of most public health alarming nutritional problems call for survey data. Provision of information for learning about the association between health, diet, and nutritional status is one of the major objectives of NHANES III. The evaluation of nutritional status calls for a succession of weight, height, and other anthropometric dimensions; on top of dietary intake methodologies, nutritional biochemistries, hematological tests, as well as questionnaire material. The term “anthropometry” refers to the gauging of the body of humans based on muscle, ...

Business Report on Tesco

Executive Summary
Tesco is known as the third largest retiling store in the world. From its emergence until now, Tesco earned a lot of profit and is providing a variety of products to its consumers. Geographical diversification in Tesco leads it towards the height of success. When we analyze the internal and external factors that affect the performance of Tesco, we realize that strengths of Tesco make his business very profitable. There is a tough competition that Tesco has to be faced but due to its diversifying products and good quality business operations, Tesco is still among the top ...

Experiment 4: Projectile Motion

Introduction:
Projectile motion is a special type of motion involves two components of motion – horizontal and vertical. But motions in two directions are independent of each other. Flight of ball is an example of projectile motion. This two dimensional motion can be determined as two linear motions in two mutually perpendicular directions –one along horizontal direction and the other one along vertical direction. Projectile motion can be analyzed with the help of equations of motion. Vector equations and vector rules are generally used as the motion occurs in two dimensions. Gravity force has primary importance in projectile motion. Effect ...

Introduction

Alternative renewable energy continues to grow popularity because of the upsetting climate change caused by greenhouse gases, exhaustion of non-renewable energy resources and rising global demand for energy. Renewable resources of electricity production are vital progress and are fundamentally motivated by cost.
Solar energy is clean and profuse that is why it is the best among the available substitutes. The modern solid-state photovoltaic (PV) technology began in 1954 upon the discovery of silicon (Si) diodes photovoltaic effect . Crystalline Si and a wide range of thin film solar cells, which are inorganic, are the prevailing photovoltaic technologies employed nowadays .
The ...

Assignment

Calculate the theoretical discharge for each trial using Eqn. 5.

Replacing all the values
= 5.4 * 6 * 9.81/2 * (2/3)3/2 * 1.53/2
=36.69

Trial 2:

Replacing all the values
= 5.3 * 6 * 9.81/2 * (2/3)3/2 * 1.753/2
= 61.86

Trial 3:

Replacing all the values
= 5.2 * 6 * 9.81/2 * (2/3)3/2 * 23/2
= 90.59

Trial 4:

Replacing all the values
= 5.1 * 6 * 9.81/2 * (2/3)3/2 * 2.253/2
= 126.51

Trial 5:

Replacing all the values
= 5.04 * 6 * 9.81/2 * (2/3)3/2 * 2.53/2
= 171.5

Trial 6:

Replacing all the values
= 4.97 * 6 * 9.81/2 * (2/3)3/2 * 2.753/2
= 225.09

Trial 7:

Replacing all the values
= 4.89 * 6 * 9.81/2 * (2/3)3/2 * 33/2
= 287.53

Trial 8:

Replacing all the values
= 4.83 * 6 * 9.81/2 * (2/3)3/2 * 3.253/2
= 361.1
Calculate ...

Abstract

Concrete acts as one of the most essential and cost-effective construction material made from a mixture of sand, cement, aggregates, and water. Cement acts as a binder for holding all the components together. Engineers working in the construction site must understand the purpose of the construction because different structures require different concrete strengths. The strength of cement paste used controls the overall strength of concrete that depends on the water-cement ratio. The following experiment was conducted to investigate different mechanical and physical properties of concrete.

Objective: To determine mechanical properties of concrete.

Materials used: Aggregate (coarse and fine), sand, cement, water, compressive machine, cylindrical and rectangular ...

VEGETATION ANALYSIS LAB REPORT

INTRODUCTION
Growth in plant may be referred to as a progressive development in plant and can be expressed in terms of dry weight, length, diameter, and height. The growth of the plant results in the development of different structures, which all the conditions are optimum results in a proportionally matured plant. Agents that affect plant growth may be classified as environmental or genetic. Environmental factors affecting plant growth include the content of the moisture in the soil, temperature, radiations from the sun, soil reaction, mineral nutrients that are available, biotic factors and atmospheric composition among others. Each of these ...

Lab Report:

Abstract
The tidal cycle of natural water bodies present challenges for sampling and interpreting physical, chemical and biological data. The Rainbow Channel at Morton Bay was the location for a field work project on sampling characteristics about the biota and about water quality parameters. Rainbow Channel experiences ocean flushing dependent on daily, monthly, seasonal, and annual at regular natural time intervals. Both daytime and night time sampling took place to better understand 24 hourly and daily cycles of nutrient concentrations, salinity, temperature, fluorescence and currents. Primary productivity takes place at different three different depths. The rate of productivity depends ...

Aims and Objective

The highways part aims to provide the student the basic understanding of highways design construction. An understanding of highway design construction needs an understanding of the practices associated with the rote selection is the traffic flows, vehicular behavior, and highway capacity, and also other environment. It is also aims the student to provide the basic understanding of the pavement and the traffic signals.

Learning Outcomes

This case study is to aims to give the student an experience of completing the exercise. The highway route selection, carriage stand, and the pavement design. This allow the student to become proficient in skills to ...

ENGINEERING

Abstract
Wind turbines have become a practical and efficient fossil fuels replacement for the generation of electrical energy. Characteristics optimized include weight, ease of manufacture and structural integrity. Ease of manufacturing has a direct relationship to costs. Lighter materials for blade construction are necessary to decrease blade weight and lengthen blades. Carbon fibers or composites of glass and carbon fibers are lighter than glass fibers. Hypothesis: controlling the speed of the infusion will allow the capacity to manage the speed of the infusion process and in that way control of the final composite material. Results showed that 68.5 meters ...

Introduction

Brassica rapa, more commonly known as field mustard is part of the taxonomic group Family Brassicaceae. According to the Wisconsin Fast Plants Program, B. rapa is a rapidly-cycling species or a fast plant. This plant was believed to have originated from the highlands near the Mediterranean Sea (Tsunoda, 1980 as cite by Rakow, 2004). Nishi (1980, as cited by Rakow, 2004) reported that this species rapidly grows under low temperature conditions. According to Warwick and Francis (1994), B. rapa extensively grows to coastal lowlands, plateaus, hills and montane regions having an elevation of up to 2300 meter above sea ...

Abstract

Bridges are the most complicated structures to design in the Engineering field. The following experiment conducted using spaghetti and any type of glue in building a bridge model. The experiment involved testing how much weight can the spaghetti hold in tensile using a tensile strength testing machine. The experiment aimed at making a practical representation of real bridges and the forces on them. Three main real bridges are discussed, truss bridge, srch bridge, and suspension bridge. The tests were conducted through hanging weights on the constructed spagheti bridge and determining the breaking loads. The experiment result analysis showed that ...

Research question

The experiment was used to investigate the intraspecific and interspecific competition of plants in the same family. The experiment was to show the competition between plants of the same species and plants of different species. The variables included temperatures, light and water. Intraspecific competition occurs between organisms of the same species and since they are likely to have similar resource requirements they are likely to compete for any limited supply. In interspecific this is a complex ecosystem with many different needs competing for resources such as food, space or light.

Hypothesis

Competition among plants involves a struggle for limited resources ...

Introduction to Physiology: Respiration

There are a lot of factors that determine the rate and depth of human respiration. Some of the factors are influenced by the conscious control part of the brain while others are not. Different organ system functions leads to unique pattern of respiration and even though respiration is controlled by the autonomous nervous system, people play a part in the control of breathing. Respiration is affected by certain chemicals which include oxygen, carbon dioxide, acid, epinephrine and acetylcholine (Marieb e.tal 2010).

Whether or not oxygen concentration affects respiration remain a debating topic in the scientific realm. This ...

Travel agencies offers travel information, booking and reservation services including transport and accommodation, as well as, tourist attractions to both business travelers and private individuals.

The main activities of this industry include ticket consolidation, booking service provision, ticket selling, tour retailing, tour guide service provision, tourist bureau service provision, tour wholesaling and travel agency operation. Also, the key products for the industry include conference travel, business travel, tour wholesaling and ticket consolidation, inbound tours and leisure travel. A related industry is X0003 Tourism in Australia, which offers tourism services for both international and domestic tourists.

Industry Performance

The key external ...

Final Exam Geology

Patterns of Surface Ocean Currents

Surface currents are found in the upper four hundred meters of an ocean body and they form major patterns such as eddies, upwelling, and gyres (Garrishon, 2007). Surface currents result from wind energy that is concentrated in both north and south hemispheres forming trade winds which are easterlies and westerlies (Garrishon, 2007). Waves on the sea surface transfer some of the energy from the moving air to the water by friction. Pulling of wind on the surface of ocean causes an accumulation of water with the water ...