Flip-flops Reports Samples For Students

REPORT NUMBER 6

‘State Machines and Code Generators’
The report presented is the sole work of the author. None of this report is plagiarised (in whole or part) from a fellow student's work, or from any un-referenced outside source.

PRACTICAL 6: STATE MACHINES AND CODE GENERATORS

AIM:
INTRODUCTION:
This laboratory is about the design, implementation, and testing of a state machine counter and a pulse train generator. The circuits will use JK flip-flops and logic gates to implement the necessary logic operation of the problem. The ICs used are the 7474 JK flip-flops and the 7400 NAND gates . The state machine counter has to follow a State Transition Diagram ...

Module 6

Design of Synchronous Sequential Counters
ELEC201
Digital Electronics
Partner Name:
Objectives
The objectives of the laboratory were as follows:
Introduction
Counters are categorized under Medium Scale Integrated sequential logic circuits. The counter circuits consist of several flip-flops that have been cascaded together and may also have an additional combinational circuit. They are mostly used in application that involve counting where they are applied in either the measurement of time that elapses between two instances that are not known, or the measurement of the frequency of a particular signal.

There are several types of counters such as those given below

- Asynchronous counters
- ...

Module 6

Study of Sequential Sequence Detectors
ELEC201
Digital Electronics
Partner Name:
Introduction
Circuits whose state transitions are controlled by a clock pulse are called synchronous sequential circuits. Other circuits whose state transitions are not controlled by a clock signal are called asynchronous circuits. This lab aims at equipping students with knowledge on synchronous sequential machines.
These are machines designed to solve a problem, which requires the output, to be some specific value after a given sequence of input values has been observed. This problem led to the development of two types of machines in the mid-1950s. These machines ...