Essays on Potentiometer

Abstract

Further experiment is devoted to an adjustable air damper coefficient measurement. To calculate this coefficient, a flexible air damper is used in the experiment. Three integrative components of the experiments were applied: Lab View, air damper, and the potentiometer. First, test focuses on the equation ratio between the position and the voltage (d = -0.3504 V + 1.8397). Further, the experiment considers velocity measurement with the help of different weights. The main statement of the experiment is that the Damping factor Value is 2.8111lb*s Incp. Based on this value, further experiment is conducted. This value means a constant nature of ...

TA’s Name

Partner’s name Lab Report Introduction: We practiced making circuits with combination of resistors in this lab. In Part A, a known resistance, potentiometer and LED were connected in series with the source. The POT was initially tuned to the maximum voltage using the multimeter. The POT was then adjusted till the LED began to glow. In part B, a circuit having a combination of resistors was connected. The voltage across each resistor, along with the current, was measured using the multimeter. The current values measured were then compared with those predicted by Ohm’s law, which gives the following ...

Lab Report

Abstract: In this lab, we practiced making combinational circuits using the given resistors. We also learnt how to use a potentiometer in a simple circuit. For the combination of resistors, the voltage drops across individual resistors, along with the currents were measured. The current values were compared with the current values predicted by Ohm’s law, which states that V=IR, where V is the voltage, I is the current, and R is the value of resistance. In the first part of the lab, a potentiometer was connected in series with a 100Ω resistor and a LED, connected to a 10V source. Initially, the ...