Essays on Epoxy

Summary

While all the components of a brake system are important, it is imperative to acknowledge that some components play significant roles in the system as compared to others. One such component is the brake pad. In most cases, the brake pad is referred to as the friction material. It is responsible for generating the friction which opposed the movement of the wheel thus causing a stop to the movement of the automotive. This report is aimed at selecting a section or component of the brake system and presents its modification. As a consequence, the report highlights and discusses the ...

Definition of Coatings

Coating is the process whereby one material is used to continuously cover another surface. According to Dewo et al. (2015), coating is a surface modification approach that involves the addition of a new material onto the surface of a substance or element that is at risk of corrosion.

Formula: Rusting of Iron.

iron + oxygen + water ==> hydrated iron(III) oxide (RUST) 4Fe(s) + 3O2(g) + xH2O(l) ==> 2Fe2O3.xH2O(s)

Different Types of Coatings

The process of coating utilizes multiple films of coatings as primers and top layers. The purpose of each layer is particular; however, the layers often interact with one another (Özçam et ...

Lignin Chemistry

Lignin History Lignin is a plant-derived biopolymer with several applications. It is considered an effective alternative to chemically synthesized plastics that pose serious environmental problems during manufacture and disposal. Lignin is often obtained as a byproduct in paper and pulp manufacture. Lignin has to be dissolved to obtain cellulose from wood. In 1838, Anselme Payen discovered that wood contained cellulose, and oxidizable coatings (later called lignin) that bind the cellulose together (McCarthy and Islam, 2000). This coating material could be removed from wood after acid treatment and washing with an aqueous alkali solution (McCarthy and Islam, 2000). Later, several ...

Material Extraction of Dry Battery AA:

A typical alkaline dry AA cell comprises a cylindrical external case, cathode, anode, and electrolyte and separators. The external casing is made from nickel-plated steel and is lined with a separator to divide the anode and cathode. The separator is made of either a porous synthetic material or layered paper. On one end, the battery canister is sealed with an epoxy or asphalt sealant underlying a steel plate and at the other end with a brass rod driven through the cylinder. The rod is welded to a metallic end cap and passed via an outer plastic seal. Inside the ...

Introduction

All aircraft are constructed with the identical simple elements: wings for lifting, engine to enhance drive power, a fuselage to carry load and controls, and a tail assembly which typically regulates the bearing of flight. The fuselage or body of the airplane clutches all the fragments together. The pilots sit at the front of the cockpit at the fuselage. Travelers and cargo stay in the rear of the fuselage. Some aircraft carry fuel in the fuselage; others aircrafts have engines in the wings. The wings lift the weight of the aircraft itself, the fuel, the travelers, and the cargo. ...

Introduction

Tensile testing is usually conducted to select a material for its application, quality control, and to forecast how the material is likely to react on deployment of different types of forces. The properties evaluated through the tensile test include the ultimate tensile strength, the maximum elongation, X-area reduction and so forth. These evaluations facilitate determination of such properties as Young’s Modulus, yield strength, Poisson’s ratio, and the characteristics of strain hardening [1. 2]. Tensile testing on glass fibre is, thus, performed to determine the quality of the material it contains, and to ascertain its suitability for various applications.

History of Fibre Glass

...

Literature Review on Carbon Fibers

This paper sums up a literature review on a unique and astounding development in the field of Science, known as carbon fibers. Although, they were discovered during late 1800s for the first time, their true potential was not realized until mid 20th century, and even today, researchers are experimenting over new areas of application for carbon fibers. The paper will further discuss; different areas of application, the composition, structure and characteristics of the carbon fibers used, along with a list of merits and demerits of using carbon fiber in place of a traditional alternative in modern engineering.

Carbon fibers have molded into many ...

ENGINEERING

Abstract Wind turbines have become a practical and efficient fossil fuels replacement for the generation of electrical energy. Characteristics optimized include weight, ease of manufacture and structural integrity. Ease of manufacturing has a direct relationship to costs. Lighter materials for blade construction are necessary to decrease blade weight and lengthen blades. Carbon fibers or composites of glass and carbon fibers are lighter than glass fibers. Hypothesis: controlling the speed of the infusion will allow the capacity to manage the speed of the infusion process and in that way control of the final composite material. Results showed that 68.5 meters has ...

Aloha Airlines Flight 243 dating back to April 28, 1988 was a scheduled flight conducted by Boeing 737-297 and operated by Aloha Airlines Inc., which resulted in a drastic and abrupt loose of the extensive fuselage unit, what, in turn, stipulated passengers and the cabin crew members’ being exposed to incident flow effect and oxygen starvation (hypoxia), one of the flight attendants perished.

Probable causes of the accident are considered to comprise the following items: corrosion, poor epoxy of the fuselage units, metal fatigue (namely, rivets’ deterioration) and extensive damage of fuselage metal and skin (apparently, due to multiple takeoff-and-landing cycles ...