Essays on Atmospheric Pressure

Q1. A 200mm diameter pipeline divides into two smaller pipelines, one being 100mm in diameter and the other being 150mm in diameter. If the velocity in the 100mm pipe is 0.3m/s and that in the 150mm is 0.6m/s, calculate the flowrate in litres/s and the velocity in m/s in the 200mm pipe. [ 13 l/s, 0.413m/s] Solution: Flow Rate = (pi/4)(0.1)2(0.3) + (pi/4)(0.15)2(0.6) = 0.01296 cubicmeters/sec = 12.96 l/sec. (ans.). Velocity = (Flow Rate)/(Area) = [0.01296]/[(pi/4)(0.1)2] = 0.4125 m/s. Q2. If the specific volume of water is 0.001251 m3 /kg. calculate:

The mass and weight ...

Introduction

Water is termed the ‘universal solvent’ since it is capable of dissolving a large variety of substances. These solutes can be broadly classified as ionic and molecular solutes, based on their behaviour in solution. Ionic solutes dissociate into their constituent ions when dissolved in water. An example of this class is sodium chloride (common salt). Molecular solutes are dissolved as uncharged molecules, like sucrose (sugar). The effect of ionic solutes on the boiling point of water is the focus of this project. Boiling occurs when the vapour pressure above a liquid equals the pressure over it. Hence, the normal ...

The current drought experienced in California is caused by the greenhouse gases affecting atmospheric pressure. Therefore, the assumption that human being responsible for the drought is accurate. Research indicates that some actions of the human beings are contributing to the development of the effects of the drought; the original causes of the drought can be linked to global warming. However, the mitigation of its effects calls for the assumption of quick and decisive action. The fact that the drought is not caused by the human activity in the state does not absolve the other human activities on the other ...

Introduction

The exchange of respiratory gas is limited by the capacity of the respiratory muscles to circulate air in the lung. Ventilation fails when muscles do not have the capacity to cope with the load brought by the mechanics of the pulmonary system. It is crucial to comprehend the mechanics of respiration/breathing not only for purposes of diagnosing how the system has failed and to offer the correct prescription for treatment of the failure, but to be capable of providing the most effectual temporary respiratory support through the use of a mechanical ventilator, as well. The first category explains the ...