Essays on Compressor

Introduction

The cost of manufacturing ammonia using the Haber process plant constitutes the following components: the cost of energy, raw materials, equipment, labor and sparking substances (catalysts). Energy (gas or electricity) costs are incurred to maintain the temperature of the reaction. The Harber process is operated at very high temperatures, and pressures thus higher costs of energy are incurred. Some of the raw materials consumed in the Haber process such as nitrogen and hydrogen are recovered at the end of the process. The recovered materials are recycled back to the system to reduce the cost of raw materials. Starting and ...

Introduction

Control systems are not complete without the installation of actuators. Actuators are the mechanisms which are used by the control system to achieve a process or a function. They are responsible for the motion or control mechanisms which are used by the control system to accomplish their defined operations of functions. Actuators are used to convert the electrical signal from the control system to mechanical movement or motion which then accomplished a desired task or function (Bart et al., 2013).There are different types of actuators used in control systems. The type of actuators used in control systems depend ...

Introduction

At times, industries require the temperatures to be kept below the ambient for some processes to be effective. To do so, they must design ways to eliminate the excess heat generated by machines and introduce an artificial room temperature lower than the ambient. They must effectively eliminate temperatures above the ambient. A refrigerator is thus required in these operations. This refers to a device that can maintain the temperature below the ambient. The primary objective of a refrigeration process is to lower the temperature through heat removal. Since its invention, refrigeration has seen used in many industrial and household ...

Introduction

A refrigerator is an electrical device used in temperature maintenance below ambient temperatures. To achieve this function, the refrigerator should be able to create a heat sink at cold room temperatures a temperature that should be lower than the ambient temperature while at the same time also rejecting heats having higher temperatures than the ambient temperatures. To achieve this refrigerant is forced to undergo evaporation at temperatures lower than the ambient temperature(Griffiths, 1937). When the refrigerant is compressed at high pressure and condensing temperatures above the ambient temperature results in the loss of heat and condensation back to ...

A brake is a device that produces artificial resistance to the moving part of a machine to stop or slow down its motion. Any machine or its part that is in motion possesses kinetic energy. As per physical laws, energy cannot be destroyed; its form can only be transformed. The brake system converts the kinetic energy of the moving machine or part into thermal, potential or chemical energy. Brake systems are of various types utilized in different applications in industries, home appliances, vehicles, railway trains, and other sectors. This paper has focused on the brake systems used in vehicles, ...

Objectives

Introduction A wind instrument is an instrument that produces sound by manipulating air through varying the wind pressure passing through the air outputs of the device (Berg and Stock, 27). These devices are heavily dependent on pressure as well as the size and shape of the instrument (pg. 28). A good example of a wind instrument is the organ pipe. It is a tool that produces a specific pitch when pressurized air is driven through it. Organ pipes usually exist in sets, where each is confined to produce a specific tune. Normally, it is a keyboard device that is ...

Aims

Studying the vibrational modes of organ pipes Introduction Sound is a vibration that arises from a mechanical wave of pressure and displacement, through a medium like air or water (Berg and Stock, 23). The reception and perception of these waves by the brain is referred to as sound. On the other hand, acoustics deals with the study of these mechanical waves in matter (pg. 40). In this experiment, the organ pipe is the main target of discussion. This is a sound producing wind instrument that resonates at a specific pitch when pressurized air is driven through it. A complete ...

Basic Modules of Gas Turbine High Bypass Engine

Air Inlet Section: As shown in figure 5, the air inlet section is the most forward section of the engine. This section forms the air inlet for the engine and houses the inlet guide vanes. The purpose of the vanes is to direct the incoming air at the proper angle to the first fan stage. The vane at the bottom of the air inlet is thicker than the others in order to accommodate engine tubing. As indicated in figure 6, the no. 1 bearing support assembly is mounted in the center of the compressor inlet case. Behind the front ...