Essays on Inlet

Letter of Transmittal

Richard Albert Sylvester Management Consultant Lamplighters Corporation Ottawa K I P 5B5 Phone: 613-563-1509 www.lamplightres.ca The Right Honorable Justin P.J. Trudeau

Office of the Prime Minister

80 Wellington Street

Ottawa, ON K1A 0A2

RE: Project Suitability Report on the Proposed Trans Mountain Expansion Pipeline Project Dear Right Honorable Prime Minister, It is with great pleasure and honor that I submit this report on the suitability of the proposed Trans Mountain Expansion pipeline project. The Trans Mountain Expansion pipeline project proposal by Kinder Morgan aims at increasing the current capacity of the existing Trans Mountain oil pipeline. Currently, the existing infrastructure has a capacity of 300,000 barrels per ...

Introduction

The main objectives of this report include; designing the operational principles of parallel and counter flow of heat exchangers. Improving the understanding of fluid temperature and flow rate heat exchangers and lastly to calculate and determine the overall heat transfer coefficient of a heat exchanger ("Superplastic duplex stainless steel heads for the heat exchanger market", 2010). The parallel flow of fluid is characterized by the flow of cold and hot fluids in the same direction; it, therefore, means that the entrance for the two fluids are in the same direction likewise their exit are also normally in the same ...

Introduction

At times, industries require the temperatures to be kept below the ambient for some processes to be effective. To do so, they must design ways to eliminate the excess heat generated by machines and introduce an artificial room temperature lower than the ambient. They must effectively eliminate temperatures above the ambient. A refrigerator is thus required in these operations. This refers to a device that can maintain the temperature below the ambient. The primary objective of a refrigeration process is to lower the temperature through heat removal. Since its invention, refrigeration has seen used in many industrial and household ...

Lab Report

Lab Report

Introduction

Air stripping lacks an official academic definition, but a widely accepted definition within the field regards it as the transfer of contaminants from aqueous solutions to air [1]. This process is commonly performed to decontaminate waste water and groundwater for public health purposes, given its ample use in the removal of volatile organic compounds (VOCs) from water into air. Air strippers, the devices that carry out this process, are composed of a cylindrical tank which can contain different materials such as steel, ceramic or plastic. Contaminated water is pumped into the apparatus through its upper inlet, proceeds ...

BERNOULLI’S EXPERIMENT

ABSTRACT Two fluid properties, the Bernoulli principle and the Venturi effect, were examined and analyzed in this experiment. A venturi meter was used to measure the fluid flow rate, velocity, and pressure of water (the fluid being examined). The results showed that the fluid pressure decreases as the fluid traveled through a smaller cross sectional area. The minimum fluid pressure (in effect, maximum fluid velocity) was observed in the smallest cross sectional area at position D (diameter 16 mm). The decrease in fluid pressure was compensated by an increase in the fluid velocity. With these two measured phenomena, both ...

BERNOULLI’S EXPERIMENT

INTRODUCTION This experiment aims to verify Bernoulli’s equation that relates the pressure and the velocity of a fluid. The aims of the experiment are: A venturi meter is a device used in fluid measurements. It uses a converging section of a pipe in order to change fluid velocity or pressure. The venturi meter in this experiment is used several times to estimate flow rates and measure piezometric head values at different points along the venturi meter. The fluid used in this experiment is water. Bernoulli’s equation is a mathematical model for ideal fluids. Because of this, the ...

Introduction

Energy is a key driver of any nation’s economy. The extent to which it contributes to the performance of all activities surrounding the human life is beyond measure. This is because energy contributes almost fully to the economic development of the economy. In its physical form, energy is classified either as renewable or non-renewable. Renewable energy forms the green energy that can be reused again and is less toxic to the environment. On the other hand, non-renewable energy is exploited once it’s used and mostly pollutes the environment. All this energy forms can be either used directly ...

Introduction

The fundamental process of thermal power plants is based on the conversion of thermal energy into mechanical energy and, subsequently, into electric power, using steam as the working fluid. According to the U.S. Energy Information System, over 67% of the electrical energy in the United States is generated through thermoelectric power plants, which use the combustion of fossil fuels such as natural gas, coal and petroleum to generate the steam necessary for the process; moreover, thermoelectric power generation accounts for an approximate 80% of all the power generation worldwide. Thus, the electricity consumed in most homes and industries is ...

Re: A column to separate an Acetone-Methanol mixture

The objective of the project was to optimize the design of a column used to process a supply stream containing 35 percent acetone at 30oC. The optimized design should turn out a distillate product containing 0.75 mole fraction of acetone and 0.0010 fraction of bottoms acetone. The outcome of the experiment produced a distillate product containing 0.0079 molar fraction of acetone.

The molar fraction of acetone in the first inlet stream was determined to be 0.14 lbmol/min. Also, the total flow rate of the second inlet stream and the total gas flow rate were determined to be 61.84 lbmoles/min ...

Pump Application: Building Water Pump

Pumps are devices used to move fluids from one point to another by creating differences in pressure between the two points. Pumps are powered by a prime mover, which can be either a diesel engine or an electric motor. The pump converts the energy supplied by the prime mover to potential energy by pressurizing the fluid it’s pumping. For example, a diesel pump has an engine that converts chemical energy in the fuel to mechanical energy in the form of torque. The torque from the engine is then picked up and transmitted to the pumping mechanism for fluid ...

- Introduction A four stroke or four cycle engine is an engine operating on the principle of internal combustion, in which pistons (one per cylinder in multi-cylinder engines) completes four separate strokes for each thermodynamic cycle, which is accomplished over two consecutive revolutions of the engine’s crankshaft.

These four strokes are: the Intake stroke, the Compression stroke, the Power stroke and the Exhaust stroke. The sectional diagrams below illustrate these four strokes in a single-cylinder engine; the curved red arrows represent the direction of rotation of the camshafts (small arrows) and the engine’s crankshaft (larger arrows). The ...

An EMS controls the vehicle engine in response to both vehicle and engine inputs. It consists of an electronic control unit composed of a micro-processor with several electromechanical and electronic actuators and sensors. Sensor devices are used to monitor the vehicle engine and detect engine speed, lambda values, crank angle and other engine parameters. The electronic control unit determines the engine ignition time, the quantity of fuel and other engine parameters that keep the vehicle engine running. The ECU does this by use of input values that are calculated based on the inputs that originate from the sensors. Under this ...

Heated hose pipes are the pipes that offer constant water supply in freezing temperatures. Mostly, they are built and designed to fit personal equipment, structure and requirements. Mainly, they are made up of thermostat switches. As temperature approaches freezing zones, the heat from the heaters keeps the water flowing if need arises. Mainly, the heating element used is copper wire. It’s mainly inside the hose pipeline. It mainly regulates the water flow by turning on and off the heater. The element is usually 50 feet long as it runs with the hose pipe. The length and diameter plays ...

Abstract

The assessment of respiratory functions is mandatory in the diagnosis of lung diseases and related disorders. These functions are assessed by measuring the lung volumes and capacities. In the present experiment, we learnt the use and operation of BIOPAC airflow transducer for measuring the lung volumes. We understood the rationale behind the precautions taken while experimentation. We could successfully correlate the obtained results with the physiological conditions of the subjects of the study.

Experiment on Respiratory Volumes

Respiratory system is a vital system of human physiology. It is involved with the gaseous exchange wherein oxygen is inhaled and carbon dioxide is exhaled from the ...

Methods of Heat Transfer

Conduction The first method through which heat is transferred from one object to another is conduction. Conduction occurs in liquids and solids through transfer of kinetic energy present in one particle to the immediate particle(s) in its surrounding. By considering the bonds existing between atoms and molecules in solids as elastic links, the vibration of one particle due to increase energy level caused by heat, the next in its line vibrate too. This process is replicated in adjacent particles thereby allowing transfer of thermal energy from a body with a higher temperature as compared to the one with low ...

Introduction

When the word “fluid” is mentioned in everyday language, many think that it simply refers to liquids. However, in the world of physics, the term fluid has an entirely different meaning. It denotes any liquid or gas that has the ability to adjust or conform to the shape of the container in which is it being held. Fluid mechanics refers to the study of fluids in motion and at rest. Fluid mechanics is usually divided into two subsections. The first subsection is referred to as fluid statics. This is primarily concerned with studying those fluids are stationary or static. ...

Introduction

Composition of Dietary Fiber Dietary fiber is an essential component in nutrition and health (Mora et al., 2013; Klosterbuer, Roughead, & Slavin, 2011). Thus, the present study will explore the effect of particle size and source of fiber on the level of cholesterol in the human digestion system. Primarily, dietary fiber is a constituent of plant foods and includes materials that have diverse morphological and chemical structure. Such materials resist enzymatic action in the human digestion system (Dhingra et al. 2012). In the gastrointestinal tracts, the dietary fiber forms a matrix that has both amorphous and fibrous characteristics. The matrix’s ...

Introduction

There had been many innovations for developing equipment that could deliver nutrients or even doses of medications inside a person’s body. One of these developed medical devices is the infusion pump. Infusion pumps are used to deliver nutrients and medications, such as antibiotics and pain killers. They can also be used to administer chemotherapy drugs which, if not administered properly, can be the difference between life and death for the patient (Brady). Infusion devices are usually classified based on the power source used and could be either of two types: gravity controllers or infusion pumps. Gravity controllers, which ...

Abstract

A hybrid car is a car used to drive the drive wheels more than one energy source. Hybrid car called the vehicle driven by using the hybrid power plant. A distinctive feature of the hybrid power plant is to use two or more sources of energy and their corresponding engines that convert energy into mechanical work. Some sources of information used, the term "hybrid engine", which from a technical point of view is incorrect. Despite the diversity of sources of energy (thermal energy of gasoline or diesel fuel, electricity, compressed air energy, the energy of the compressed liquefied gas, ...

Lab Report: Experiment on friction in Pipe

Introduction: Fundamental understanding of fluid flow is important to every industry related to chemical engineering, manufacturing industries etc. The flow networks are required to achieve continuous transport of products and raw materials from different processing units. Energy is required to be applied to the fluid to make it flow through the pipe overcoming energy loss in pipe. The pipe losses in a piping system takes place due to a number of system characteristics such as pipe friction, changes of flow direction, obstructions in flow path, sudden or gradual changes in cross-section and shape of flow path. In this report loss ...

Piston: Pistons of 4-stroke engine moves between Bottom Dead Centre (BDC) and Top Dead Centre (TDC) to complete a single thermodynamic cycle. Latest 4-stroke automobiles are designed to run on unleaded petrol. A 4-stroke engine is called an internal combustion engine, where the piston completes 4-separate strokes they are intake, compression, power and exhaust. The intake stroke of the piston moves down (or BDC) and the engine takes a cylinder full of air and petrol. Then the piston moves back (TDC) and thus compress the petrol and air mixture. When a piston reaches at the top the spark plug of the engine ...

1.0 Lab 1: Heating Value Measurements: Solid and Liquid Fuels with a Bomb Calorimeter 1.1 Introduction Measurements of heating values can be derived for both solid and liquid combustible fuels using an Oxygen Bomb Calorimeter. The calorimeter measures heat. Heat is not the same thing as temperature. The heat of combustion is called the calorific value. The calorific value is “:the number of heat units liberated by a unit mass of a sample when burned with oxygen in an enclosure of constant volume” (Introduction 2007). The experiment uses the 6100 Bomb Calorimeter. The definition of calorific value in a bomb calorimeter ...

Introduction

Fluid mechanics can be described as the application of laws of force to the concept of motion of fluids. The mechanically produced force is used to move a fluid form through a designated routed in order to perform a certain operation. This paper focuses on the centrifugal pump as an equipment that generates the force require to move a fluid through a route in relation to the monitoring and measuring fluid behavior. The centrifugal pump is one of the widely used equipments in hydraulic systems. They operate on the centrifugal force principle. The principle requires that a force be created by a rotating object in ...

Badi'al-Zaman Abū al-'Izz ibn Ismā'īl ibn al-Razāz al-Jazarī or simply al-Jazari – was an outstanding engineer and inventor, mathematician, astronomer of the Islamic Renaissance who lived (1136–1206) during the reign of the Turkish Artuquid Dynasty. In Arabic Islamic sources he is named literally as a “Kurdish inventor Ismail, the son of Rezzaza from Jazeera” alongside with a name of “Man of Honor”. Al-Jazari gained world fame generations ahead as an inventor of strange mechanisms that advanced far beyond the XII-XIII centuries during which he lived and made great scientific discoveries, but personally he was "more interested in the ...

Abstract

The purpose of this article is to closely scrutinize and understand the anthropology of the Kwakwaka'wakw people. The Kwakwaka'wakw are the native people who inhabit the British Columbia located in the northern island of Vancouver. Approximately 5, 500 left in number, they are a smaller community that has succeeded to endure and hand down their traditions from generations’ in spite of outside elements influencing them. This article discusses the culture of the Kwakwaka'wakw people with focus on definite issues of concern. This article is an introduction to the Kwakwaka'wakw’s tradition and treasures, and unraveling how these are shared ...

Control Valves

A valve is a control device that is utilized in adjusting the flow rate of a fluid in a pipe (Doddannavar, Barnard, and Ganesh, 2005). This implies that the flow rate will change as the valve opens and closes either partially or fully, thus providing some obstruction to some extent (Rennels and Hudson, 2012). The valve comprises a flow passage in which the flow area can be varied. Operation of valves in most scenarios is manual. In cases where the valves are operated automatically, electromechanical actuators are used. The electromechanical actuators can include electric motors or pneumatic actuators that are motorized by air ...

Chemistry

Thermodynamics of Refrigeration

In the olden days winter was the best time of the year for cold drinks, sorbets and ice creams because ice was readily available. Without a thorough understanding of thermodynamics our communities might have to be brought their ice in an ice wagon just like in the olden days. The laws of thermodynamics were developed by scientists and used when processes of the Industrial Revolution were developed. The physics of heat transfer are applied in order to transfer heat away from the portion of a refrigerator or air conditioning that needs to continually cool the air. Now the ...

Abstract

Heat transfer through a cylindrical pin fin s studied. For the purposes of this study, thermal conductivity, heat transfer coefficient and the source terms and the sink terms are assumed to depend on the temperature. In the model being used for the study, the source and sink terms are given as arbitrary functions. We therefore employ techniques on symmetry to find the forms of the source and the sink terms which the extra lie point symmetries are admitted. The method of separating variables is used in the study to get the exact solutions when the equation for the equation is ...

Basic Modules of Gas Turbine High Bypass Engine

Air Inlet Section: As shown in figure 5, the air inlet section is the most forward section of the engine. This section forms the air inlet for the engine and houses the inlet guide vanes. The purpose of the vanes is to direct the incoming air at the proper angle to the first fan stage. The vane at the bottom of the air inlet is thicker than the others in order to accommodate engine tubing. As indicated in figure 6, the no. 1 bearing support assembly is mounted in the center of the compressor inlet case. Behind the front ...