Hydrochloric Acid Reports Samples For Students

Question 1:

Answer 1:
The mixture of ammonium vanadate, ammonium hydroxide, and hydrochloric acid was yellowish and had less color in comparison with the control.
As Manganese sulfate was mixed with ammonium hydroxide turned into orange, Though as it was mixed with hydrochloric acid its color did not changed and stayed clear.
The control of iron nitrate was orange, but as it was mixed with ammonium hydroxide the color changed into red and after mixing with hydrochloric acid the color was yellow.
The control of cobalt nitrate was pink. When it was mixed with hydrochloric acid the ...

Dr. Professor

Paracetamol is crystalline white power with the scientific name N-(4- Hydroxyphenyl) acetamide. The chemical formula is C8H9NO2 and its structure is

Properties

The melting range of paracetamol is 168 to 172oC and its solubility is 14.3g / dm3 of water and ethanol’s 100g / dm3. It is insoluble in ether and dissolves quickly in chloroform. It dissipates uv absorption minimum in aqueous acidic medium at 245 nm and has uv absorption maximum in aqueous alkaline medium.

Assay

Through titration, paracetamol is analyzed using ceric ammonium sulphate. In the titration, Ferroin plays the role of indicator. It is also assayed ...

Introduction

An acid that gives two hydrogen ions for every acid molecule is known as diprotic acid. Examples of such acids are sulfuric acid (H2SO4), hydrogen sulfide (H2S), oxalic acid (H2C2O4), chromic acid (H2CrO4) and carbonic acid (H2CO3). Dissociation of a diprotic acid in water takes place in two stages. In the first stage, the diprotic acid dissociates to give one hydrogen ion and a monoprotic form of the acid.
H2X(aq) H+(aq) + HX-(aq)
The second stage involves the dissociation of the monoprotic form of the acid to give the second hydrogen ion and fully dissociated form of ...

Introduction

The periodic table of elements is table used to display the important information about elements in accordance to their chemical and physical properties. The first physical property that was used to arrange the periodic table is the different boiling points of elements. The second property is the melting point of element. They differ according to their atomic number due to the distance between the energy level and that of the outer electrons. Thirdly the density and viscosity of the element played a major role in determining the arrangement of the elements in the periodic table. The other property is the ...

Background theory

Equipment used in the experiment: Burette, pipette, pipette filler, clamp and stand, a small and a large beaker, three conical flasks, white paper, phenolphthalein indictor, dilute solutions of HCl and H2SO4 of unknown molarities, and 0.10 dm–3 NaOH.

Equations, diagrams, and calculations:

Concentration of the sulphuric acid solution
Molarity of the alkaline solution of NaOH 0.10 mol. dm–3
As found in the experiment,
Average volume of H2SO4 is 11.15 cm3 = 0.01115 dm3
H2SO4 → H2+ + SO4–
NaOH →Na++ OH–
H2+ + SO4–+ 2Na + 2OH → Na2+ + SO4–+ 2H2 O
Thus, the hydrogen ions in H2SO4 reacted with hydroxide ions ...