Impulse Reports Samples For Students

Introduction:

In a typical hydroelectric power generation system, a dam (water reservoir) is built near water body such as a river to create head (height) that enables water to flow at high pressure via a pipe (penstock) to the turbines that drive the power generators. The fast moving water turns the turbine blades at high velocity, and in turn, the turbine turns the electricity generator’s rotor. The wire coils in the generator’s rotor sweep past the stationary coil (stator) in the generator thus producing electricity. This concept was first demonstrated in 1831 by Michael Faraday, who discovered that ...

Introduction

The fundamental process of thermal power plants is based on the conversion of thermal energy into mechanical energy and, subsequently, into electric power, using steam as the working fluid. According to the U.S. Energy Information System, over 67% of the electrical energy in the United States is generated through thermoelectric power plants, which use the combustion of fossil fuels such as natural gas, coal and petroleum to generate the steam necessary for the process; moreover, thermoelectric power generation accounts for an approximate 80% of all the power generation worldwide.
Thus, the electricity consumed in most homes and industries is ...

Introduction

The modern era is becoming so demanding to the human being and hence man has been working tirelessly in trying to come up with ways of doing things faster, efficiently and accurately. Development of man like-machine is one of the technological advancement that has resulted from such efforts. It involves the application of the concept of Pattern recognition in designing a machine that can emulate the various action of human being. Pattern recognition is a concept whereby machine is designed in a manner whereby it can act according to certain pattern this concept was established when the mechanism of human brain became ...

Introduction

When it comes to control systems, the inverted pendulum system is something that stands out from amongst the rest. Linear control concepts such as stabilization of unstable systems can be demonstrated using the inverted pendulum. Since the system is intrinsically non linear, many non linear concepts can also be demonstrated using the inverted pendulum. This system has basically two equilibrium states, one stable and the other unstable. In the stable equilibrium state, the pendulum points downwards and in the absence of any controlling forces, it returns to its original state. In the unstable equilibrium state, the pendulum points upwards. ...

Appeal to the Audience

The report talks about the importance of controller tunings in controlling industrial equipment. According to the report, controller valves are important in controlling the flow rat, the amount of input in machinery and also the amount of output of the machine. The importance of the controllers can be seen in controlling a water cooling machine in which case a slow controller would be inappropriate to be used. The importance of a feedback controller on the other hand is the essence that it enables the determination of an error that may occur between a set point and the process value hence determining the output ...

A product is whatever that can be presented to the market. It aims to satisfy a need or a want. It can also be called merchandise. They can be bought as raw materials and traded as finished goods. On the other hand, a service is an intangible commodity. The provision of a service is usually an economic activity where the purchaser does not, only by an exclusive contract, get the exclusive possession of the object being purchased. The objective of this paper is to know the importance of a product or service in the industry. It also aims to identify the differences between a product ...

LAB REPORT-CONTROL SYSTEMS

Abstract
Filters are widely applied in many fields and are found in most of the devices. Such areas include low-pass filters installed in the landline telephones, a high-pass filters that are installed in the DSL modems with high-bandwidth and a band-pass filter installed in the cell-phone. The latter enables one to hear only the person to whom you are speaking, but not any other person around you even if they too are on their calls. Finally is the band-reject filter that helps to reject any AC power signal with a frequency of 50Hz or 60Hz when operating the sensitive ...

International Marketing Plan of Burts Potato Chips

Executive Summary
The globalization has changed the face of the international business, and the companies are now expanding their operations to more than one country so that they can tap untapped segments to increase profitability. Some of the benefits of the international expansion into emerging economies are a large base of potential customers, decreased costs and economies of scale due to large operational capacities. Burts Chips is also planning to achieve these benefits of international expansion by expanding the operations to Brazil. This document provides detailed insights into the economy of the Brazil and suggests suitable entry method along ...

- Difference between product and service sales
In sales, being aware of the relationship between product sales and service sales as well as differentiating each of them is one of the best way of knowing their differences. Products and services have differences that determine the things that go on in their sales. One of the biggest differences between product and service sales is that product sales can be termed as transactional in nature. On the other hand, service sales are ongoing engagement between the seller and the buyer. A product sale is demarcated into the pre-sales activities and ...