Tunnel Reports Samples For Students

Thames Tunnel: Travelling under the river

Recognized as engineering virtuoso, Isambard Kingdom Brunel is also acknowledged for his audacious plans and colossal structures that are critical parts in even today’s times. Brunel amalgamated innovation and immeasurable boldness of foresight in constructing his oft contentious “trophies.” Born to French and English parents, Brunel began his internship with his father on the building of London’s Thames Tunnel. Soon after, Brunel was designated as the projects’ resident engineer; aside from being the lead engineer, Brunel was also able to gain considerable knowledge and exposure on cement and brick structures that would serve him in his future ...

Define Activities:

The primary activity is to develop the longest road tunnel in Australia. The tunnel will be 9km long, and reach from the northern exchange, near North Wahroonga, to the southern exchange, near Northmead. This will include the creation of not only the tunnel itself, but also tunnels for onramps and off ramps, as well as additional earthwork, the widening of brides, creation of drainage infrastructure, new pavement and the replacement of signage to indicate the tunnel, once open. The purpose of this construction is to create an alternate route for trucking traffic, to remove roughly 5,000 trucks from ...

Soft tissue injuries of the handCarpal tunnel Syndrome. Carpal tunnel syndrome is an arm disorder that causes tingling, numbness and other indications. Carpal tunnel syndrome is associated with a pinched nerve in the wrist. Factors that can contribute to the carpal tunnel syndrome are; patterns of hand use, anatomy of one's wrist or certain health risk factors. Bound by tendons and bones, carpal tunnel is a thin pathway that is situated on the palm flank of the wrist. That passageway protects the main nerve from the hand and tendons that bend the limbs. The compression of the nerve is what produces ...

1. Introduction
Agriculture and other food products are dried for use. The agriculture grains are dried for future use or production process, in order to dry the agriculture products the sun drying has been used for many years. The sun drying dries the products in a open air condition with the help of hot sun rays. In past centuries the sun drying systems has been used. Most of the industries use mechanized drying instead of sun drying system. The mechanized drying uses boilers and fan to heat and force the air to the required part. The time taken for ...

Executive Summary

Project Management is highly important aspect of making any deal between two or more organizations, especially those that involve works and infrastructures that are intended to be used by the public citizens. A joint project between a for profit and a government-related department or organization, for example, such as the construction of public works, highways, transportation systems, among other forms of infrastructures, should be carefully managed by a carefully selected and credible team of project managers. The outcome of the project be it good or bad, will basically depend on the effectiveness and the efficiency of these people in doing their job. ...

COMMUNICATION ACCESS

Mobile computing has grown exponentially in the last few years due to several factors including the growth of service work in Western society and the need for co-operation between many parties in the work force . These factors require increased use of information technology and physical interaction thus leading to the need for mobile computing.
Mobile computing devices are a common and it is more common than not to have internet access available on these devices via a wide variety of connection methods. This paper presents the different connection methods, how they work and gives examples of where the various ...

Final Assignment

Both Bridges and Switches work on the data link layer of the OSI Model. However, switches are more advanced. Discuss how a switch has an advantage over a bridge in a network then elaborate more on the technology implemented in switches to control broadcast domains
A bridge is a two interfaces device that creates two collision domains. This is because it forwards the traffic received from one interface only to the interface where layer two devices is connected (Olenewa, 2014). Bridges serves the main function of reading the destination of MAC address to forward the traffic only to the interface where it ...

Lab- Accumulator

Purpose
The purpose of this lab report is to understand the working of accumulator machine in the various working environment.
Theory
A useful application of the accumulator is to provide the ready source of the hydraulic power; thus the pump is running constantly. This application permits the small pump and the accumulator are to deliver a high output for the required intervals of time. The pressure switch is being used to charge the accumulator in the pressure level. The hydraulic solid pressure is sufficient for this operation. The regular piston accumulator is used as the mounting bar. ...

Waste Management

Introduction
Dealing with waste has become an increasing concern nowadays, since it affects people’s life quality by impacting the health, it affects the aesthetics, it jeopardizes the ecosystems and in general, it negatively impacts the environmental sustainability. Domestic waste (generated by individuals) and commercial and industrial waste represent a quotidian aspect that authorities are aiming to handle, either through applying laws and guidelines for maintaining healthy and clean cities and villages, either by applying various technologies for actually managing the waste disposals. And the processes and technologies used to manage the various types of waste differ depending on ...

Part 1.

The cost, time, specification triangle is a visual way of expressing the constraints that govern all project management projects (Lock, 2007, p. 7). It is a useful way to show the relationship between the key components of a project and because of their inter-relationship, it provides a reminder that changes in any of the three constraints will have an impact on the remaining ones. However, there are issues when attempting to use this approach as the sole way of determining if a project was successful. In particular, the cost, time, and specification are always determined in relation to the needs of the client for ...