Polymer Reports Samples For Students

Chemistry

2. The nano carrier needs to remain in suspension in H2O, PBS, human serum, etc. What type of polymer do you need to use to decorate the surface of the nanocarrier to achieve this goal?
In order to maintain the nanocarrier in suspension in water, Phosphate-Buffered Saline (PBS), human serum a suitable solution a polymer is needed on its surface. The polymer used needs to accomplish three goals. The polymer needs to decorate the nanocarrier surface to enhance suspension and secondly, to prevent protein absorption. Another characteristic is that the polymer evades the immune system. PLGA poly(lactic-co-)glycolic ...

Introduction

Alternative renewable energy continues to grow popularity because of the upsetting climate change caused by greenhouse gases, exhaustion of non-renewable energy resources and rising global demand for energy. Renewable resources of electricity production are vital progress and are fundamentally motivated by cost.
Solar energy is clean and profuse that is why it is the best among the available substitutes. The modern solid-state photovoltaic (PV) technology began in 1954 upon the discovery of silicon (Si) diodes photovoltaic effect . Crystalline Si and a wide range of thin film solar cells, which are inorganic, are the prevailing photovoltaic technologies employed nowadays .
...

Abstract

This report acknowledges the various properties associated with plastics and their behaviour when subjected to different conditions of loading. This experiment investigates the mechanical behaviour of five types of polymers which include Silly putty, six pack rings, nylon cable ties, Ply Doh, and Splat Ball. The properties of plastics can be altered to introduce cross-links and thereby introducing constraints to prevent sliding or rotation. The findings of the experiment concluded that temperatures, speed of loading and chemical composition of plastics are determinants of their mechanical behaviours.

Introduction

Polymers play a critical part in day-to-day life as manifested in the numerous applications. ...

Executive summary

This experiment seeks to compute the overall mass transfer coefficients for nitrogen gas and oxygen gas via a polymer membrane under different experimental conditions. The calculation of the overall mass transfer coefficient of the gasses will aid in establishing how the permeability of the polymer membrane is affected by altering these conditions. The experiment employs the calculation of the separation factor in determining the efficiency of a membrane in separating oxygen gas from nitrogen gas. It uses the measured values of flow rates, exit streams and flow rate composition of the membrane component to calculate the mass transfer coefficients. ...

Abstract

Application of the nanofiltration (NF) and ultrafiltration (UF) processes is applied in the handling of water that is produced raw. The application has been investigated in the current day through various studies (Wang 14). The experiment of the processes of both nanofiltration and ultrafiltration is conducted in the laboratory unit which is operated in a pattern of cross flow (Ashaghi, Ebrahimi, & Czermak, 46). The study that was conducted in Oilfield of North Sea using the process of membranes of ultrafiltration (UF) and microfiltration (MF) indicated that the content of hydrocarbon decreased from 50 mg/l to 2 mg/l which recorded ...

EXECUTIVE SUMMARY

Special designs have been made to suit various sports. This is important as it plays an important role in sports performance. Companies have resorted to good quality textile materials to design sportswear clothing. Sportsmen should wear comfortable costumes for them to perform well in their competition. When designing sportswear, the market has to be identified first. That is the design to be used, the materials required and footwear. The fabrics available should also be identified. The comfort of the wearer is also considered as this affects performance.

History of polymers

Polymers have been used for centuries to manufacture plastics. Due to advance ...

Uranium (U) element was discovered by a German chemist, Heinrich Klaproth, in 1789. Uranium is a radioactive element with an atomic weight of 238.02891 and an atomic number of 92. The uranium element initially discovered by Heinrich was an oxide, uranium oxide. A French chemist, Eugène-Melchoir Péligot, was the first person to produce pure uranium by reacting it with potassium in a heated platinum crucible. The element’s radioactive properties were established in 1896 by a French physicist known as Antoine Henri Becquerel. Currently, uranium can be extracted from various ores such as carnotite (K2(UO2)2VO4· ...

Report on Vinyl Chloride

Report on Vinyl Chloride
The case involves a man who went into a polymerization tanks measuring 8 feet in high and 5 feet wide. The man went into the tank alone at night, and there was no light in the pit. After 20 minutes, the man did not return, and somebody went to check him. The man was found lying in the pit. The person who was looking for the man climbed in order to get the man out, but the person was overwhelmed by the gas. The person immediately shut the open valve feeling dizzy. The person dragged himself ...

Introduction

The increasing use of electronic devices like mobiles and laptop has necessitated the constant supply of power. A power bank is increasingly becoming a ‘must have’ for people on the move. Kazam Mobile, the startup mobile company has come up with its Kazam Power Bank (KPB) which can power the batteries in use in mobiles and laptops.
This report starts with the corporate objectives of Kazam. This is followed by a market overview of the power bank market in the UK. An internal and external audit of the market would be presented thereafter. The assumptions for the power bank ...