Joint Theses Samples For Students

Effectiveness of Supported Angel Heel Treadmill Rehabilitation on hip fractured patients

Physiotherapist
DECLARATION
I, the undersigned Fatih Serkan YILDIRIMER (print name), a student of the Faculty of Public Health of Debrecen University, being fully aware of my legal liability, do thereby declare and certify with my signature that my thesis, entitled

EFFECTIVENESS OF SUPPORTED ANGEL HEEL TREADMILL REHABILITATION ON HIP FRACTURED PATIENT

is my own original work and that the printed and electronic literature referred to in it was used in accordance with the international rules of copyright.
I understand that in the case of a thesis, it is considered plagiarism when:
● quoting word for word without quotation marks and referring to literature without proper citation.
● referring to content without citing ...

I hereby certify that this material, which I now submit for assessment on the program of study leading to the award of BACHELOR OF ENGINEERING HONOURS (MANUFACTURING AND DESIGN ENGINEERING) is entirely my own work and has not been submitted for assessment for any academic purpose other than in partial fulfillment for that stated above.

Signed

Hussein Al-Tuhoo
ACKNOWLEDGEMENTS
I have been indebted in the preparation of this thesis to my supervisor, Dr Maura Kelleher of Dublin Institute of Technology College, whose patience and kindness, as well as her academic experience, have been invaluable to me. I am extremely grateful ...

Abstract

Background: Gluteal muscle contracture (GMC) is a clinical syndrome characterized by limited hip movements.

Methods: In this prospective study, 23 patients received traditional incision surgery and 22 patients received small incision surgery for the treatment of GMC. The two groups were compared for duration of surgery, length of incisions, requirement of postsurgical analgesia, postsurgical complications, off-bed activity times, duration of hospitalisation, clinical outcomes and one year recurrence rates. Statistical analysis was performed with SPSS software; enumeration data were analysed by χ2 tests; and measurement data were analysed by t tests.
Results: The small incision surgery group was significantly superior ...

Abstract

US Special Operation Forces (SOF) are elite military units affiliated to the United States of America with the ability to conduct a wide range of land, water and air missions behind the enemy lines under the U.S. Special Operations Command (USSOCOM) commandant. Currently USSOCOM has deployed over 12000 of its 33000 special operators across the world half of whom are in Afghanistan and the remaining in 70 odd countries.
The US SOF has the following strategic roles as mandated by congress and the department of defense in the fight against the war on terror. Foreign internal defense which enables ...

Introduction

In the recent past doing business beyond the borders has been the wish and struggle of most organizations in the world not only for profitability but also to caution the business against the domestic uncertainties. This has driven the motive of multinational enterprises (MNE). Recently the urge of going global has made many businesses to venture into new overseas markets leading to foreign direct investments (FDI). Presented in this research is an able overseas market for the Dutch stroopwafels manufacturers in Yangling. As a way of satisfying the growing demand for their product, they are presented with a virgin opportunity which ...

Differences between National and International NGOs -

A Case Study of the US, Bahrain and India
(Author name)
(Supervisor name)

References

1 Introduction
Non-Governmental Organizations or NGOs have become influential actors of societal development and change on a national as well as international scale. Beginning as non-governmental consultants to the United Nations, the number of NGOs across the world has witnessed exponential growth since the 1980s. Although most people understand what an NGO is - the name itself makes it very clear that these are organizations that are not government run – there is little consensus on what may be described as key characteristics of an ...

For a long time, biomaterial research has focused on the development of synthetic materials for use in reconstructive bone surgeries. Biomaterial research has aided and made possible the total knee replacement surgery. Even though many techniques have made anthroplasty possible, polymers are the recommended materials. A background research on Polymethylmethacrylate (PMMA) portrays it as the best material for knee reconstruction; this paper explains its suitability. It will be an improved knee replacement technique. Patients make decisions to have joint arthroplasty based on the quality of their life coupled with improved surgical techniques (Scuderi & Alfred 4).
PMMA is a biodegradable compound. ...

AN EXPLORATORY ANALYSIS OF SENATE BILL 863

Requirements for the Masters in
Public Policy and Administration
Degree
The thesis of
is approved by
__________________________________

Chairperson

ABSTRACT
California’s (CA) legislature has passed a series of Workers Compensation (WC) reforms during the past 15 years; the most recent, Senate Bill (SB) 863 passed on August 21, 2012. SB 863 was introduced and presented to the California public as a reform bill that would ensure better coverage and easier medical access for workers injured on the job. SB 899 passed during the early 2000s was shown to be better for California’s workers, than SB863. ...

The paper argues about the human mind exhibits unity; that it can perceive various activities occurring at the same time together as elements of a single conscious state. The unity of consciousness is fundamental to human cognitive functions. It is the basis in which we merge our senses and our minds to recognise, act and react. The unified consciousness is responsible for our ability to make comparisons based on our senses weaving it into one experience.

The notion of the unity of consciousness is the basis of cognitive research stemming from notable work by Descartes, Leibniz and Kant. Descartes’ argument ...

Introduction

Starting an interior design business of your own is considered as one of the fulfilling jobs nowadays. This is one of the best small businesses to start, both in the terms of money and satisfaction. If you have a keen sense of design and color and want to explore more of the interior design, then this is a perfect start for you. The interior design industry is becoming popular these days and by starting an own business is a perfect way to fire up the enthusiasm in your ideas.

Types of Interior Designers

The main objective of interior designers is to improve and ...

Improving the processing of polymer manufacture to get the maximum mechanical properties

There are various characteristics and properties of Polymethyl methacrylate (PMMA) that are essential in the improvement of the processing of polymer manufacture. PMMA have been widely used in place of the glass. Consequently, its unique features have been the contributing factors in its applications. The properties of PMMA include:

Weight: The material is always lightweight and even durable.

Density: The material has a density of between 1.15-1.19 g/cm3. This weight is estimated as half the density of a glass material.
Strength: PMMA has a good impact strength which is significantly lower than the strength of the polycarbonate as well as other engineered polymers. In addition, the strength of the PMMA ...

Literature Review

Despite small in size, the Gulf Cooperation Council possesses an insurmountable amount of power in the Middle East as its members are the influential and richest nations in the Gulf. With the GCC acting as a political and economic union, other nations and even the international community is seeing the Union as a potential leader in enacting the Millennium Development Goals in the region. However, there are some studies that see GCC as a still fledgling organization that still does not have claws and fangs in influencing its member countries, especially in other concerns like political, economic and social policies it has ...

B.ENG 3 (HONS) FT CIVIL ENG.

2012/2013

1. ABSTRACT
This investigation is an approach to methods of solving problems in a standard form of contract called JCT. In the following work the JCT methods as Litigation, Negotiation, Arbitration, Adjudication and Mediation will be properly, defined, clarified and explained, subsequently the use of a questioner will be analyzed and discussed. This subject was chosen since nowadays with all the laws and clauses in contracts, disagreements happen often between parties in the construction business and in order to solve it through the right method, JCT can save both parties time and a reduction of ...

EXECUTIVE SUMMARY

When attempting to fill a position in any business, the recruitment process is integral. In order to find the best person for the job, you have to find someone who is qualified, educated, and possesses the necessary job skills and temperament to survive in that environment. Recruitment methodologies are the means by which companies and businesses perform this recruitment process, and can mean the difference between getting the right or wrong person for the job. In this paper, various recruitment methodologies are overviewed, and their effectiveness in sourcing a qualified job candidate is evaluated.

EVALUATING THE ROLE OF RECRUITMENT

Before a recruitment process can begin, there are ...