Plane Reports Samples For Students

The Japan Airlines Flight 123 was a Japan Airlines domestic flight that departed from the Tokyo International Airport destined to land on the Osaka International Airport on the day, Monday 12 of the month August in the year 1985. The plane later crashed on the ridges of the Mount Takamagahara in Ueno killing almost all the passengers and working crew on board making it count as one of the major and deadliest aircraft accidents in history.
Cause(s) of AccidentThe airplane crash report showed a number of causes that led to that fatal event on that day as were released ...

Boeing X-32, a multipurpose jet fighter, lost to the Lockheed Martin X-35 during the joint strike fighter contest. The X-32 has composite wing that is of carbon fiber, and trapezoidal in shape (Griehl, Manfred 56). The wing had a high sweep angle meant to allow a thick section of the wing to be used while it is still providing limited transonic drag. The angle was also significant as it provided a good angle for the antenna equipment that was installed in the equipment. The engine of the plane was positioned behind the cockpit. This position of the engine places the plane ahead of ...

Company Profile

Emirates group was introduced on the market in 1985, and since then it has remained competitive and relevant in the market. The company is worth US $12,000 after rebasing, and it has over 40,000 employees (Wilson, 2009, p. 8). The government solely owns the company, though it does not engage or make any dealing for the company. The company flies close to a hundred destinations and has increased its effort of increasing its fleet to meet the rising demands of the market. Emirates has its headquarters in Dubai with subsidiaries spread globally. Due to competition, the company has ...

Business Strategy

Business Strategy is termed the determination of a fundamental long haul objectives and goals of the undertaking and the reception of activities to accumulate all assets to complete these objectives. With the end goal organizations should succeed they think of a heading in which it will lead them down a long haul accomplishment of targets empowering them to develop and stretch. With a specific end goal to wind up fruitful another entrepreneur must figure out what market it ought to enter and in the event that it will can rival other comparative markets. When the business sector is chosen, for example, the air ...

Space/ Scale/ Territory

Millennium Park is a 24.5-acre park that has several venues for performance, art, architecture, sculpture, and landscape architecture. It is located centrally in Chicago’s central business district and the lakefront. The Millennium Park emerged from a dilapidated ground-level parking space and rail yard into perhaps what may be regarded as the world’s biggest “green roof,” spanning two multi-level parking spaces with a total of over 4,000 cars and one commuter rail line. In Millennium Park, space is created in various ways. For example, there is the illusion of space created through structures and activities that allow ...

Lab Report

Introduction
The purpose of the experiment was to show how prism separates white light into its component colors and to show how different colors are refracted at different angles through a prism. It was hypothesized that violet color would be the most refracted because it had the lowest wavelength.

Materials

- Light source
- Trapezoid from Ray Optics Kit
- Blank White Paper

Procedure

The light source was placed in a ray box mode on a sheet of blank white paper and a single white ray was selected by turning the wheel. Trapezoid was positioned such that its acute angle side faced ...

Abstract

The objective of this laboratory experiment is to examine the qualities of projectile motion. Considering the movement of a steel ball in the horizontal plane, the initial velocity that is possessed by the steel ball can be ascertained from the assessed range. Considering the assumed initial velocity of the steel ball, the range of the projectile will be assessed for a variety of initial angles. The initial angles and will be computed by the application of the theory with regards to motion for constant acceleration.

THEORY

Considering a given initial speed demonstrated by v0→, with an initial velocity demonstrated by s0→ that is ...

Geometry of Plane Shapes

This is a branch of mathematics that is basically concerned with shapes and their properties. The shapes involved here are plane shapes (geometry) which have to do with lines, circles, triangles, rectangles, squares and other polygons which include pentagons, hexagons, octagons etc. other types of shapes are solid geometry (including cubes, pyramids, prisms)
The general properties of planes shapes also called flat surfaces are that we can calculate their areas and perimeter or distance around the shape. We however cannot find their volumes and their total surface areas because their thicknesses (or widths or breadth) are really negligible compared ...

Introduction

Solar heaters have been popularized in recent years for use in tertiary and residential areas. This has happened mostly in the third world countries. The reason behind this encouragement to use solar heaters is the reduction of cost and improving the performance. This has necessitated the use, and testing of solar heaters to produce hot water. The solar heater is fundamentally made up of tanks that act as solar absorbers ad storage bases for warm water. This is used in glazing to profit the green house effect and the insulating cases. The solar heaters can be made from ordinary ...

Introduction

The purpose of this project is to outline a framework to ensure the sustainability of UK aircraft carrier. It outlines some of the challenges that face the industry. Additionally, it presents a framework which can be used to address these challenges. The project also highlights a measurement regime which can be used to assess the proposed framework. Mainstream media have repetitively documented the impact of seaway transport and their eco-efficiency concerning a sustainable future. By minimizing operation and manufacturing impacts, airbus aims at optimizing their services and product towards an eco-efficient technology to minimize their environmental impact. Throughout the ...

Executive Summary

This report paper provides information about a business idea whose aim is to provide an alternative mean of transport that is convenient in short distances, less costly, and which can take short time to avoid exhausting for ill or old persons. This report talks about a phone application called Travel companion. This application helps one to travel from city to city by car in a more efficient and comfort manner. With this application, one is linked with other persons travelling to common destination ad also splits your expenses and burdens incurred while travelling with other persons. This application helps ...

This project aims at integrating modern engineering concepts and principles in the design of AERO-2016-WPAP-1111. The underlying concepts for this design involve the advancement of the traditional design processes to modern architecture to enhance the performance of the aircraft. The three most important operational precepts of this design include lightweight structures, incorporation of advanced engineering practices, and escalated aerodynamic performance of the plane. Therefore, the realization of the capability of this plane is inherent to its varying take-off weights. Principally, this essay explains various approaches that are applied in the design and operation of the AERO-2016-WPAP-111 aircraft, and how ...

Smithin K R

Abstract
The successful flight of an aircraft is often attributed to the finesse of its pilots as well as the dispatcher. It is a common practice in air crash investigations to put the blame of such a mishap on the shoulders of its pilots and the air traffic control unit. Most often, the other factors that are inclusive in any successful flight, is omitted. This paper tries to analyze these causes from the perspective of National Transport Safety Board, to generate an independent view about the crash of UPS Flight 1354. After thorough inspection of NTSB reports three main ...

Experiment 11

Introduction:
When a body moves in a circle and its angular speed changes, the body experiences an angular acceleration. Torque gives the body an angular acceleration. Rotating a body necessitates to overcome rotational inertia of the body, known as its moment of inertia. In highly symmetrical cases it is feasible to develop formulas for calculating moment of inertia of a body. In this part of the experiment, a constant torque was applied to a circular disk that could rotate on a low friction bearing. The disk span up to a higher angular speed. Object of this experiment was to calculate the disk's angular acceleration and relate it ...

Aims

The main aim of the experiment was to verify the vector cross product and its torque.
Other aims were to understand the mathematical model of carrying out the vector cross product and to determine the equilibrium in a system under torque.

Introduction

In the manipulation of vectors through multiplication two kind of products are achieved, the dot product and the cross product. The dot product of a vector is a scalar quantity and hence it only has magnitude. An example of scalar quantity is work done by a force.
The cross product of a vector produces a quantity that has both direction and magnitude. ...

I would like to acknowledge the following persons and organization who did my research to be successful. They worked tirelessly with me to ensure that this research was successful.
- The university management which provided the resources that I needed in the research.
- My very able lecturers who assisted me during the research period and guided me on how I should go about it.
- The librarian and all the workers that work in the library who always ensured I could get the books I needed for my research.
- The people who proof ...

Introduction

Many civilizations today place security concerns prior to their political agenda because of the increasing perception that international security is at higher threats from malicious acts like terrorism. Though terrorism has been in existence for a longer time and many security strategies are in place to prevent terror attacks, major terrorism acts including the unforgettable day in the US history (the 9/11 attack), the bio-agent threats, the Tokyo subways attack, the 1997 intention of the Islamist extremists to bomb New York subways and the 2004 bombing of Madrid commuter trains have evoked a stronger battle to improve security (Adams, 2003).

Goals for the security plan

In ...

TORSION LABORATORY

Objective
The objective of this experiment was to determine the relationship between load and angular deflection of a mild steel bar, the maximum shear stress applied to the bar and its modulus of rigidity.

Apparatus

- Torsion test rig
- Weight hangers
- Masses
- Rule
- Calipers

Procedure

- A distance L was set between two angle indicators. Then the fixings were tightened to make sure that it was not moving. The indicators were set to zero on both the scales.
- The effective radius of the pulley and the diameter of the steel shaft ...

Outline
I. Air on commercial airline cabins is a combination of circulated and outside air.
1. Low humidity,
2. The requirement for cabin pressurization,
3. Possible exposure to ordinary biological and chemical contaminants
B. Perform a careful scientific survey to make sure that rules governing the quality of air in business aircraft cabins are sufficient to care for public health
1. Formulate a system that regularly checks the air in the cabin to ensure it is safe for the travelers.
II. Number of air travelers has almost quadrupled in the last 3 decades.

A. Number of young and old passengers has risen

1. People ...

Abstract

This lab study was undertaken to analyze the effects of torque forces and shear modulus of rigidity on three circular solids namely, half-hard brass (60% Cu and 40% Zn), 0.1% and 0.4% carbon steel. This was done by subjecting the samples to a shearing stress and by noting down its angular displacement. The maximum torque of each sample was calculated and compared. Their polar moment of inertia was also calculated to assist in analysis. The value of shear modulus of rigidity of each of the samples was determined using a graph which related torque and angular displacement. It was ...

This report is aimed to provide the description of the course I teach, touch upon the ohilosophy, teaching materials, give characteristics to one of the subjects as well as describe used teaching approaches.

At the college (the name of college is needed) I teach Employability Skills, Introduction to Computers, and Business Travel. These subjects form part of the newly opened Business Department.

Philosophical values and approach

The philosophical values that are maintained by the program are based on the adult education concepts of such scholars as Ellias and Merriam.
The program that I teach supports behaviorism in adult education and emphasizes such concepts ...

Appreciation of Art - Hamlet

Artist: - Angel PlanellsNationality: SpanishDate: 1938 Title: Hamlet Genre: Surrealism Medium: Oil paint on canvas Size: 39 3/4 x 37 3/8 in. (101 x 95 cm) About Angel Planells
Angel Planells was born in 1901 in Cadaqués en and lived the majority of his life in Barcelona where he lived all of his life. He was an introverted man who was motivated by his dreams and imagination. He was a close friend of Salvador Dalí. He participated in a number of Surrealist Exhibitions with fellow artists such as Miró, Spaniards Dalí, and Oscar Domínguez. He died in ...

The use of collinearity in imaging is a very versatile technique for image correction. The process is applicable in taking of picture using sensors from above the ground. The science behind the process is helping in converting several images taken into an orthographic image format. The camera does a transformation to a 3 x 3 matrix system which removes relief from the picture and making it machine readable. This form of change does its conversations within the ranges of changes in the X Y and Z axes of telemetry (Han, Guo, and Chou 313-316). The imaging dimensions taken have ...

Geography in the Canadian North

My ideal career path would be me being employed as a flight attendant with Air Canada. Employment for my intended career as a flight attendant is available in the Canadian North, specifically in Calgary and Edmonton, Alberta, where there are positions available. In the north, a Canadian flight attendants salary would be approximately $24,451 to $73, 406 annually. Flight attendants in Canada are represented by the Canadian Union of Public Employees, or the Canadian Flight Attendants Union.
An ideal airline to work for in the Canadian North would be one that shows up top in employee and customer ...

Bombardier being one of the largest companies in manufacturing both planes and automobile is not immune to competition. The company is said to be the only manufacturer of plane as well as trains but despite this, it faces some competition from other companies. Bombardier being a multinational aerospace company is definitely not subjected to a lot of competition since the industry requires a huge amount for capital in order to venture . This being so, there are only several competitors who are identifiable. These include Boeing Company, Siemens AG, and Alstom. Boeing Company is one of the largest aerospace companies ...

Analysis of the United States Airline Industry

Abstract1
1. Introduction1
2. Impact of the Aviation industry on the American Economy..2
2.1 Economic Impact due to Airline Expenditure Categories.3
2.2 Airline Economic Impact due to Employment .5
2.3 Airline Industry Exports6
3. United States Airline Industry Market Structure 7
4. Strategies of Companies in American Airline Industry.10
4.1 Hub-and-spoke structure10
4.2 Pricing Strategies10
4.2.1 Price Discrimination.11
4.2.2 Advance Purchase Pricing11
4.2.3 Peak Loading11
4.2.4 Cumulative Volume Pricing11
4.2.5 Risk Sharing12
4.2.6 Bundled Pricing .12
4.3 Mergers12
4.4 Low-cost Carriers.12
5. Evaluation of Southwest Airlines..13 6. Conclusion.14
7. Bibliography..15

Abstract

The United States airline industry holds a vast share ...

Introduction

The purpose of this report is to research a needs and motivation theory and apply it to analyse my consumer behaviour. The theory explored in this report is Maslow’s hierarchy of needs, which still remains one of the most accepted theories in many spheres, including marketing. The first section of this report will provide a brief overview of the theory, as well as its possible applications to consumer behaviour. The second section of the report will provide the analysis of my behaviour as a consumer from the point of view of Maslow’s approach. The third section will ...

Introduction – Role as change agent & OD specialist:

This is the New Zealand’s largest airline operating in more than 15 international and about 27 domestic destinations. It has been included in the world’s largest 20 airlines after the acquisition of Ansett Australia group. It carries almost 12 million travelers and millions of cargoes through 2 laces flights per year and has more flights than any other airlines in New Zealand, Australia and other pacific regions. It was started in 1940 with the name of Tasman Empire Airways limited which provided service across Tasman Sea with the flying boats. In 1953, it was owned by Governments ...

[Professor’s name appears here]
[Date appears here]

Abstract
This report delves into John Fitzgerald Kennedy Airport (JFK). It provides a brief history as well as the old and new structure of the airport. As well, it gives a panoramic view of the old and the new structural features of the Airport for the future needs.

John F. Kennedy International Airport (JFK) Airport: An Introduction

JFK is run by the Port Authority of New York as well as New Jersey, under a charter ratified in 1947. It is amongst the leading passenger-volume airports all over the USA, as well as the busiest international air passenger entrance, managing more air ...

1. Inverted as magnification is negative.
2. Real Image as it can be projected on a screen.
3. Two reasons.
. A ray passing through the centre of either a converging or diverging lens does not change in direction.
.A ray that enters a diverging lens by heading forward the focal point on the opposite side exists parallel to the axis of the plane itself.
4. Magnification is negative as the image size is less than the object size itself.
5. They are all equal and there are no variations in the result.

Answers on Experiment: 13( As per as data given)

1. Image is upright ...

Introduction

Faster travel time, a feat of human imagination and a masterpiece of engineering. These are but some of the things that airplanes embody in the world. While there have been many records and variations throughout history of emulating flight, it was the Wright Brothers that finally made modern aircrafts possible back in 1903 . Since then the “aeroplane” has been used in many situations of human history. Such situations include public transportation, combat and even entertainment.
This invention did not come without a price however; just as when dynamite was used in manners that were against the wishes of Alfred Nobel (leading ...

Experiment 5: Vectors and Static Equilibrium of Forces

INTRODUCTION:
In physics, the subject of statics deals with the description of conditions of force system that is necessary to maintain the state of equilibrium of engineering structure. When a body is in equilibrium, the resultant of all forces acting on it is zero. Main condition for static equilibrium is that the vector sum of all the forces acting on a body must be zero. In this report equilibrium was discussed by carrying out an experiment. For an analysis of a vector quantity like force vector operations like vector addition and subtraction are required and in this experiment this vector operation ...

1. When the load on the specimen increases, the compression on the specimen increases. The longitudinal strain increases by increasing of the load value. The young’s modulus gets increases with the longitudinal strain. The load compresses because of the load.
2. When a compressive force acts on the specimen, two types of stain occur one is lateral strain and another strain is the axial strain. The specimen undergoes lateral strain to some extent. The lateral strain occurs due to the overload applied on the specimen, but the specimen undergoes more longitudinal strain than the lateral strain. The specimen ...

Vancouver Harbor Airport is on the Sea Island, across the Fraser River in Coal Harbor. The actual Vancouver Harbor Airport ship docking area is 49017`26.44”123007`08.90”W of Canada. The Vancouver Harbor Control Tower, situated on top of the Granville Square building should be the first directional aspect to consider. The nearest airport to Vancouver Harbor Airport is the Vancouver International Airport that has it is located within approximately 8 miles (12km) South-southwest of CXH. The airport is relatively at low elevation of approximately (0), and it recommends that planes can only take off at relatively lower ...

ACKNOWLEDGEMENTS

I would like to acknowledge the following people for the support they provided to ensure my successful internship

My Professor.

Luiz Correia, GM of Randgold, Tongon
Ibrahim Cissé, Tongon IT Superintendent

John Paul Pasion, IT specialist

I’d also like to acknowledge the help of personnel at the Loulo mine, Mali
Tidiane Komou, Loulo IT Superintendent
Chiaka Berthé, GM Loulo

Introduction

My internship lasted one month. It was a two-part internship: The first part being in Ivory Coast, and the second in Mali. Both of these I did at mines owned by Randgold group. Randgold Resources is a multinational mining company, focused in gold mining in ...

In the movie Inside Man, which was directed by Spike Lee (2006), the plan for the bank heist was formulated very well. In particular, Dalton Russell, the mastermind, planned for and anticipated everything. For example, he planned for an easy and “clean” entrance into the bank, that is, the robbers came in as painters who were dressed in uniforms, which made nobody take particular notice of them. They also used infrared light in the form of flashlights to ensure that they wouldn’t be seen on the surveillance cameras. By the time that the security guard noticed their suspicious ...

(Course No.)
(City & State)
A node contained determined distances from itself to other three nodes s1, s2 and s3. The other nodes are defined as S1 = (ax, ay). S2= (bx, by). S3= (Cx, Cy). The distances from node N to each of the three nodes is r1 and r2. The Trilateration problem is to find the coordinates of the unknown node N= (nx, ny) from the given information.

A complicating factor is that the unknown node coordinates are moving and the measurements contain measurement features.

The intersection of surfaces in a sphere can be found by formulating equations of the three spheres and then solving for the unknowns in the x, y and z planes. ...

Goals and policy

In may1996, a small private airline based in Scotland emerged calling itself Scotia airways. A group of business owners and investors did this but with a goal of becoming a worlds leading airline, they have managed to take their company on top and the whole airline will continue to concentrate more on the services rendered to the clientele through out the journey. Scotia’s goal has three areas with one of them being global. They give the best services to all their customers so that they can retain them and make them come time to time and even refer their friends to ...