Essays on Welding

The European renaissance was a time for people to rediscover philosophies from the Greek and Roman culture. These influences changed aspects to the English literature for the better. During the medieval times, dramas consisted of focusing on religious themes but with the rebirth the renaissance brought tragedies and comedies became the norm for stories and plays. Authors, such as William Shakespeare and Chaucer, began creating works that the held their beliefs on what the world and life were like. This paved the way for many other authors to base their literary works off of what they believed instead of ...

Hotel Monte Carlo Hotel in Las Vegas was built in 1995. Three years later, on 25th January 2008 a fire broke and destroyed some parts of the hotel. It is believed that the main factor for the start of this fire was the welding that happened on the on a catwalk at the roof high screen parapet wall of the Monte Carlo Hotel (Beitel, J., & Evans, D., 2011). The investigation results were never published. However, the questions remained. What were the things that contributed to the spread of fire trough out the building? The investigators examined the constructions material ...

I attended SAE Formula sessions which usually takes place on Wednesdays 4 pm where I learned quite a number of practical lessons. The first session took place on Week 3, 28 Jan 2015. We learned about the chassis. The design problem faced were that the main roll hoop was not rule compliant while the new one ordered was expected to arrive Jan-29th. Meanwhile we decided to tack the new role hoop onto the chassis and begin assembling the suspension components for rolling chassis. On the suspension part we realized that the silver horse was not matching with the piece ...

Introduction

As the Risk Control Manager for an oil refinery, one is tasked to prepare a safety plan for refinishing the interior of a 200,000 gallon fuel tank. The scope of the work includes painting the interior of the fuel tank and welding some broken legs on the floating roof. The safety plan is hereby presented with the focus of information to include: confined space entry, ventilation, and personal protective equipment (PPE).

Policy or goals statement

The objective is to successfully undertake two (2) relevant tasks: (1) painting the interior of a 200,000 gallon fuel tank; and 92) welding some broken legs ...

Lincoln Electric is a production company headquartered in the U.S.A. It is recognized worldwide due to its arc welding products. From the beginning, Lincoln Electric established its position in the welding industry and now it is considered as the leading producer of industrial electric motors. Also, Lincoln Electric has established itself as a leading manufacturer of arc welding products. The mission of Lincoln Electric Company defines the future status of the company and gives a bigger picture of the company’s desire.

The mission of The Lincoln Electric maintains certain core values that ...

Executive Summary

This report will show the analysis of Lincoln Electric Company as well as the India industry to establish whether the idea to venture into the market is prudent at the moment. This will be done using financial analysis, SWOT analysis, Porter’s five forces analysis, and VRIN analysis. At the moment. Lincoln Electric Company is an established brand and so establishing itself in the Indian industry cannot prove to be a tough task. Being one of only a few worldwide broad-line manufacturers of both arc welding equipment and consumables, it has higher prospects of striking it positively in ...

Metal handling is very significant for engineering processes. Metals possess unique properties that make them useful in engineering processes. As a result of these properties, metals are used in various construction processes such as building of bridges, houses, automobiles, machines and various kinds of structures. There are basics need to performed before processes as metals have to be joined, cut or even bent. This brings in a number of engineering practices as soldering, brazing, welding and even cutting. Plasma cutters leveraging high end technologies are used in cutting metals and joints can be joined using soldering, brazing or welding. Soldering, brazing ...

Introduction

Reciprocating engines is a well-known technology which can be used in automobiles, trucks, construction equipment, marine propulsion, and backup power applications. It involves the expansion of hot gases to push a piston within a cylinder, converting the linear movement of the piston into the rotating movement of a crankshaft to generate power. While the steam engines that powered the industrial revolution were driven by externally-produced steam, modern reciprocating engines used for electric power generation are internal combustion engines in which an air-fuel mixture is compressed by a piston and ignited within a cylinder. Reciprocating internal combustion (IC) engines are characterized by the type of combustion: ...

The case presents a case study, where the headquarters for Citicorp because small for its operations. On the other hand, St. Peter’s Lutheran Church needed to sell some of the part to recover the costs of making some repairs for the church. After securing the portion of the church, Citicorp set out to modify the portion of the church into a new building on the block. The company hires Hugh Stubbins and reintroduces another a structural engineer, William LeMessurier. The engineer embarks on a study to find out on the effects of placing on of the columns on the traditional corner location. ...

Abstract

For three years the mountain bike company has produced approximately two thousand frames daily. However, welding rods that conform to specifications appear recently to be contributing to a failure in some frames. The company’s Chief Engineer requested the Production Department’s Project Leader, Alison Passette, create a project to solve the problem.

This paper will answer two questions: 1) what information is required to determine the probable impact of the a mountain bike manufacturer’s quality assurance project on other projects within the same department, 2) should the preliminary findings affect decisions related to the expert welder’s project?

Discussion

Although the ...

1. Setting standards for record keeping requirements, will help in collecting better information on the incidences and nature of occupational diseases. These information are collected on a national basis. Setting standards for recording keeping will help in effective analysis of this information. It can also improve employee’s awareness and involvement in reporting and recording occupational injuries. Majority of the company records are computerized and are easy to access. Employees can log into his account and report his injury, in the employer’s website. It also creates awareness in the employers, on the type of illness or hazard their employees ...

Machining Technology is a manufacturing process that involves the foundational and basic principles about cutting via the application of various cutting tools. Despite the many modern technological advancement in this field of material science, it cannot be denied that there are the same principles involved both from the traditional and modern up-to-date techniques. Machining is the application of process used for shaping metals as shown in Figure 1. Figure 1. Cross sectional view of the machining process. The machining technology is applied in various work materials especially in the use of metals. It is used to shape and ...

ABSTRACT

There are a number of important benefits that can be gleaned for humanity as a whole if production processes could be moved to space. This is a holistic investigation of the different benefits of moving manufacturing processes to space, and of the current processes that are capable of being carried out in space or in orbit. Full-scale production of space vehicles is the final end goal of the process, but a focus on small-scale production via 3-D printing technologies is also examined over the course of the study. A literature review and meta-analysis was conducted to determine the effects of manufacturing in Microgravity ...

Industry Report

Introduction Annual reports are documented and published by an organization or an entity covering the financial events and development of the organization for the past one year. According to numerous business scholars, accountability is a significant factor that needs consideration in developing a company or organization report. Business reports highlight the events, particularly the financial reports and milestones of the enterprise. The target groups could be the employees, clients and potential clients, interior and exterior investors, and the authorities. Throughout the annual report, every important business event should be described, highlighted, and analyzed. The events are primarily analyzed to ...

[Writer Nаme] [Supervisor Nаme] [Dаte]

SUMMARY The Lincoln Electric was founded by John C. Lincoln in the year 1895 in Cleveland. The company started its business operations to manufacture generators and the electric motors. The first machine for welding of the arc was introduced by the company in 1911 and later on the company became the world leader in welding equipment and its supplies and their sales improved dramatically. Until 1995, the company remained under the leadership and management of employees and family when a share issue put 40 percent of the company’s ...

Abstract

The construction of the Bayonne Bridge (New Jersey) in 1931 revolutionized the structural technique and design of bridges. It was mad exceptionally well that it incorporated materials and styles that had not been used at the time. The length of the structure made it the world’s largest bridge for many years before other structures were raised. As the first structure that used manganese steel, it is pioneered and revolutionized many aspects in construction of bridges and among other structures The impacts that the bridge had after its competition resulted into much more benefits to the communities linked by ...

Natural gas represents a gases mixture that can be found in the ground and is created by the way of organic substances decomposition of anaerobic character. Typically, this type of gas is a mix of gaseous hydrocarbons, such as butane, ethane, methane, propane, etc., which is found in the earth's crust. It is broadly utilized as a fuel of very economical kind for various power plants in the glass and cement industry, nonferrous and ferrous metallurgy, building materials production and for household needs. It is also used as raw component for various organic compounds. This type of gas is a mineral deposit ...

Industry Analysis

Industry Structure Welding is an important process for different types of structures such as roads, bridges, railroads, oil facilities and general infrastructure. Arc welding is the most popular type of welding in the welding industry. The potential for growth in the industry remains high because infrastructural structures are always coming up in different places in the world. One of the most critical success factors is being able to adapt competitively to an increasingly innovative industry. Having skilled employees who are committed to the company objectives and customer-focused is an invaluable asset to any company in this industry.

Industry Rivalry

The ...

Introduction

The operational environment requires plausible analysis of the internal and external factors that are bound to impede on organizational performance. Through an analysis of the aforesaid aspects, plausible strategies are bound to emerge towards profitable outcomes. Thus, this paper will evaluate Lincoln electric as per the case questions in its venture into India.

Part I: environment analysis

Environmental audit of an organization denotes the macro environmental evaluation of the various aspects that are not within the control of the organization. As such, there are various tools that are used towards analysis of the external environment that an organization can inculcate. Thus, a PEST and ...

Summary overview:

The manufacture of beers has been in existence for quite a long while. Similarly, Keg beer has also been around for decades, although it has gone through a series of evolution to make it more desirable to consumers. In the process of all the evolution, the keg has become cost efficient and significantly reduced in its weight. From its initial manufacture, kegs were stored in wooden materials. This later changed as technology advanced, to usage of synthetic kegs which can withhold high pressures. The assembly of keg is simply a process of few steps such as collection of the keg components, ...

Construction of a Fire Pit Ring

There has been an increase in the number of people constructing a fire pit ring around their homes or camping sites for leisure purposes. The choice of material used in such projects is dependent on the financial impact it will have on the overall project. Many people, therefore, choose cheaper but most effective materials for construction. The ring makes the pit stable as well as increasing its ability to sustain a fire for log hours before it goes out. I am interested in this project because of its neat appearance, solid construction and it is very easy to build. The ...

Production processes have been revolutionized by technology. This is because technology has shaped the way products, processes and goods are produced. Technology has enabled people to simulate designs of very complex engines, aircraft models, combustion components and control centers of large ships. Though very complicated, such processes have been understood by carrying out an analysis of the product’s commodity chain. This helps in understanding the production and development of the product. Commodity chain refers to a chain of activities that consist of the labor and production activities, aimed at producing a finished product (Bair 2). These key areas work independently ...

Abstract

The focus of this research is on the shinkansen and the development of the shinkansen. The paper concentrates on the evolution of transport policies in Japan and what made shinkansen a symbol of modern Japan.

Introduction

Shinkansen Network covers the main islands of Japan and the country's major cities. The bullet trains are known as shinkansen in Japan and are operated by Japan Railways. They run at speeds of up to 320 km/h, and are well known for their punctuality, safety and comfort. Japan Rail Pass makes it very cost effective for the passengers to travel by Shinkansen. Tokaido Shinkansen is ...

1.0 Project Description 1.1 Property The Taylor Project lease owned by Fed Resources Pty Ltd is located approximately three hundred kilometers, by road, from a suitable port facility, Port Steve (see Figure 1). Fifteen kilometers to the west is a disused railway that connects the nearby pastoral village Glendale to Port Steven. Infrastructure in the area is minimal, although Glendale is connected to grid power by a small run-down substation. Local government has offered large subsidies for services to encourage development in the area and has indicated that refurbishing and upgrading the small power plant in Glendale would be of ...

When designing various projects for a client, an engineer is concerned with different aspects of the design. For instance, the aesthetic value of the design is very important to the engineer. Other factors that concern the engineer are the durability of the product and the cost effectiveness in both the design and production processes. However, and without belittling the importance of these factors, safety is ultimately the major concern of the engineer. Safety as a factor is incorporated into all designs, for both the client and the environment (including other people who might not necessarily use the product but stand in ...

Abstract

This paper is on the topic of hazard management system for the construction company specializing in rebuilding and renovating in Renovabuild. The first section of this paper will discuss the hazard management system for Renovabuild. The second section of this paper will discuss the type of hazard identification required for different phases for renovation. The third section of this paper will identify and access hazards and choose the controls of hazards pouring concrete decks at the roof of storage building. The final section for this paper will indentify the hazards and determine the consequences of hazards. Also, it will ...

(e) Estimate the average pressure loading on the pressure vessel and use the standard equations for thin-walled pressure vessels to make an estimate by hand calculation of the pressure vessel wall thickness required to give a Factor of Safety of not less than 2 using whichever of the two failure criteria gives the safer result.

Conclusion

- The weight is calculated with accuracy of -0.22(%) for the empty vessel. - The weight is calculated with accuracy of -0.05(%) for the filled vessel. - The calculated stress is verified by its comparison with hand calculated membrane stress. - Von ...

Introduction

D1.3 welding code was developed to encompass structural arc welding of strip or sheet steels, incorporating other members of cold formed processes collectively known as sheet steel. The nominal thickness of the sheet steel worked on should be less than or equal to 4.8 millimeter. Furthermore, this code incorporates three categories of welding that are distinctive to sheet metal. They include arc plug, arc seam and arc spot welds.

This welding code is appropriate to the welding of mechanical sheet steels to similar structural steels or other supporting members.

The general stipulations of the code are relevant to a wide range of situations as provided for in the code’s fundamental premise. Approval principles for fabrication of welds diverse from ...

Question 1The American Welding Society space recommendations

The American Welding Society which is normally abbreviated as AWS and has its headquarters in Doral, Florida is an organization dedicated to improving the safety of welding, cutting and hot works in the country and internationally. The organization makes publications in regard to procedures and codes that are up to date with the changing technological advancement. A confined space in a welding environment is described as an area with limited space and the entry and exit points may also be limited. A confined space may also mean an area with poor ventilation which may be hazardous to the people working ...

Acknowledgement

I acknowledge that the following report is original and is not subject to duplication from other sources.

Executive Summary

This report highlights my experience at Bonatti industry, working in the welding department. It will detail what I learnt while working and its relation to my career

Introduction

Bonatti industry is a Construction and operation & maintenance services company, located in Saudi Arabia. They especially deal with oil & Gas and power. The company has the following departments: plant construction, pipelines and Multi-Utility networks, Automation and Electrical solutions building and Infrastructure and EPC projects. Besides, they also participate in corporate social responsibility as part of their ...

Introduction

Laser technologies are used in different fields such as instrumentation, micro manufacturing, medicine, imaging and communications. Application of lasers to micro manufacturing is known to have a number of benefits which include capability of remote processing, noncontact processing, no tool wear, automation and the possibility of machining brittle and hard materials. The use of laser processes for specific manufacturing processes has been around for decades. However, the share of micro applications within the whole laser market was a minor one, with laser welding and cutting dominating the laser application sector. With the increase in miniaturization and higher integration of consumer products, ...

Introduction

Dr. Antonia Pantoja was born in 1922 in San Juan, Puerto Rico. Born out of wedlock, Pantoja grew up in the hands of the grandparents. They later moved to Barrio Obrero where the workers never paid rent but annual tax. This helped them cut down their monthly expenses. She was a teacher, a social worker and an advocate of the society. Her life was an uphill task that saw her overcome many obstacles. All her life was submerged in helping others and serving her community in Puerto Rico. Her services were not only felt in her community but also in the ...

1. Drawing It refers to the representation of objects on a surface by the use of lines joined together. When drawing, a person uses a paper, canvas or wood as the base and chalk, charcoal, water color, pencil or pen. 2. Painting Painting is the process of applying color, pigment or paint to a surface like a paper, plastic, wood or metal. It’s done using a brush, oil, ink, and water color or water miscible oil paint. 3. Tissue collage This is a type of painting done by placing torn pieces of tissue on a sheet of paper. It uses a liquid ...

1. What is the key to preventing accidents in a welding shop?

Everyone must do what it takes to keep the job safe by learning to work safely with the hazards.

2. Who is ultimately responsible for the welder’s safety?

The welder

3. Describe the three classifications of burns.

First-degree burns, Second-degree burns, and Third-degree burns,

4. What emergency steps should be taken to treat burns?

Pouring a cold liquid such as water, cold tea, or soft drink on the burn.

5. List the three types of light that may be present during welding.

Ultraviolet light, infra-red light, and visible light.

6. Which type of light is the most likely to cause burns? Why?

Ultraviolet light because the welder cannot see or feel it while being exposed to it.

7. What can be done on the job site to reduce the danger of reflected light?

Wearing eye protection safety glasses with side shields such as flash glasses.

8. In what two ways can ultraviolet light burn the eyes?

It can injure the white of the eye or the retina.

9. What is the name of the eye ...

“Lincoln Electric Company has a mission of attaining and preserving international competence as a supplier of superior equipments and products with the highest quality (lincolnelectric).” The origin of the company is in Cleveland, Ohio, where the owner Mr. Lincoln began operations in 1895 making and distributing electrodes and welding equipment (Hastings, 1999). The founder invested a capital of $200 and from that it has managed to grow over the years into being the largest manufacturer of welding machines and electrodes employing over 8000 people. Even though it started operations in an economy that was in a depression and with many competitors, it has ...