Essays on Tool

As part of the project intended to develop a learning tool to assist children with cognitive challenges, I have developed a collaborative participatory designed activities to design a computer based learning tool modified for helping children with learning challenges. The Computer Based Leaning Tool for Cognitive Disable Children provides assessment of the most salient aspects of readings for determining a student’s strengths and weaknesses. It also aids with an easy and interactive solution that assists the children learn how to read by the aid of the application. It is tailored for students that face hardships with their reading skills. The most crucial ...

Part 1

- Describe at least six important H&S factors when using a centre lathe and explain how these factors can be used to reduce risk when machining components The centre lathe is used to make cylindrical shapes from materials such as steels and plastics. Some of the safety factors to consider when operating a lathe machine include: - The lathe machine should only be operated by competent persons who fully understand how to use the machine and have gone through safety training about lathes. - The lathe machine operator must always wear safety goggles whenever operating the machine ...

Overview

In developing a schedule and a budget, there are different important tools that are essential in ensuring that there is effectiveness. To have a budget that meets the predetermined objectives, it is important to have a baseline operation strategy that would ensure that there are no deficiencies in either during the schedule and budget development or after. There are a number of tools that can be employed in developing a schedule and a budget. Some of the tools that will be used in this case include revenue projection tool, capital budgeting tool, cash flow forecast and profit and loss projection tool.

Revenue projection tool

It is a tool that is ...

Set 1

Part A. 1. BLAST - This algorithm compares the various pieces of primary biological sequence information, such as the nucleotides of DNA sequences or the amino acid sequences of different proteins, in order to identify the library sequences that bear similarities with the query sequence above a certain threshold.

2. ORF Finder – This tool is used when searching for open reading frames (ORFs) in the DNA sequence that the user enters where the information provided includes the protein translation and the range of each open reading frame.

3. Compute pl/Mw tool – This tool computes the isoelectric point (pl) and ...

With the advent of technological advancements, people have learned on how to use Twitter as a tool to share valuable information or tips. Businesses started using Twitter to market their business; they have used Twitter to give away discount coupons for their services and products. There is several business networking events that are being promoted exclusively on Twitter. Twitter is being used to promote business interests. Businessmen use Twitter exclusively for research and to follow fellow leaders in the industry. Businesses utilize Twitter daily to primarily monitor their brand in the market and to spy on their competitors (Prodromou 3). ...

LIST OF FIGUTES 3

LIST OF TABLES 3 1. ELECTRO DISCHARGE MACHINING – EDM 4 1.1 Introduction 4 1.2 History of Electro Discharge Machining Process 5 1.3 Detailed Explanation of how the process works 6 1.4 Uses/applications of the Electro Discharge Machining Process 8 1.4.1 Prototype production 8 1.4.2 Coinage die making 8 1.4.3 Small hole drilling 8 1.4.4 Metal disintegration machining 9 1.5 Examples of products produced by Electro Discharge Machining Process 9 1.6 Advantages of Electro Discharge Machining Process 9 1.7 Limitations of Electro Discharge Machining Process 10 2. ...

1. Introduction

The decision to expand the operations of Millennium Coaches to the London market is a tough one that requires a lot of considerations to be done before the venture. Expansion plans are a part of every business and are a strategic way for growth. A business can witnessed the real dangers of expansion when it proceeds with expansion plans quickly without having it controlled or conducting a thorough analysis of the new market. The most common causalities affected by the dangers of expansion include customer satisfaction and cash flow. Conducting a comprehensive market analysis is therefore the most crucial and essential thing that ...

- It takes 1,000 hours of labor to complete one batch of sandals - Production reaches a cost effective level of 283.83 hours per batch, this highlights the fact that the greater the number of units produced, the lower the overall production cost becomes I used the excel spreadsheet module in POM for windows to calculate all the data for this particular product. I extended the production timeline by another four months to determine projected levels of revenue and profitability. Using this tool is highly credible since the accuracy of the method, as reflected in the calculations, ...

Business Intelligence

The tool was developed with an aim of tracking academic performance over a period. It was intended to be used for the identification of the areas of weakness and strengths in the academic performance of each course. The tool shows the courses that are being studied in any given semester, shows the number of credit hours that will be earned for each course, the marks obtained in each course and the corresponding grade, the weight that each grade earned carries and the points obtained in the course. From this information, the tool calculates the GPA earned in that semester, calculates ...

Report: Recommendation for Adoption of Lean Sigma 6 Technology

Vodafone Group Plc.Vodafone HouseNewbury, BerkshireRG14 2FNEngland Dear Sir, I am pleased to present a report on adoption of Lean Six Sigma by the company pursuant to the study that showed necessity of such a system. The report is prepared pursuant to the company’s articles of association and goals to be the leader in technology and adoption of efficiency systems. This includes the efficiency and saving systems that will enhance the efficiency of the organization in the ever-competitive environment. The report also includes the reasons why it is the best system for the company and how it ...

1. For designing a decision support system, Noreen Wasserman has to gather the entire available data regarding the operations system of Burlington from the existent reports, surveys, industry information about competition, field data from the company’s agents, or other employees working directly with the customers, from the customers themselves and also from the competitors. There are three important stakeholders that should be assessed in this case, for gathering the needed information for proposing an efficient decision support system: the internal stakeholders (employees), and the external ones: customers and competitors. Yet, just as important, the business partners represent a key stakeholder ...

Varied Selection Tools Paper

In human resource management, there are many employee selections tools that can be applied depending on the objectives of the organization. Employee selection tools are meant to identify the most desirable features, skills, abilities and other attributes like talent of potential employees. An organization could decide to utilize tests such as personality or intelligence tests. Gilliland-Moore Wines intends to undertake a selection process.

Overview of selection processes

There are various selection processes that could be used by Gilliland-Moore Wines to identify suitable employees for the newly created positions. Tools of employee selection are used according to the procedure of employee selection.

Behavioral analytics

This is a very ...

"Are Protein-Protein interactions likely to be valid therapeutic targets for cancer therapy?" In her paper entitled “Protein-Protein interactions and cancer: small molecules going in for the kill” Michelle Arkin raises questions regarding the grooved and linear regions that permit protein-protein bonds, the binding peptides also found in those regions, if those interfaces are tractable for small molecule discovery and what compounds might serve as bonding agents. Further investigation of compounds would include if they are active, inhibiting, and do they help further characterize the target. She documents tubulin and several others that have potential. Her conclusion confirms that ...

Abstract

This study analyzes the benefits and challenges of implementing an electronic medical system in both hospital and clinic environments. The overall research problem addressed in this study is determining how to effectively manage and communicate expectations associated with perceived benefits and challenges derived from a new install of an electronic medical record. The purpose of this study is to analyze perceptions associated with both the benefits and challenges derived from installing an electronic medical record system. This problem is relevant to many such as those who ...

Importance of Forensic Tool Validation

Digital forensics is a new discipline in the field of forensic sciences, which is molded by the birth of innovative technology. Digital forensics uses tools, which are mainly computer based devices. In order to fortify the groundwork of digital forensics, the validation of the forensic tools is an integral process to fulfill. These tools ought to be validated in order to guarantee that the results provided by the tools are exactly correct. Also, it should be ensured that the evidences that the tools will bring about can be taken up in the court dealings. The field of digital forensics ...

My patient is a seventy five year old African American man with Geriatric condition. Geriatric is a condition that affects elderly people. The medication administered to such individuals is called Geriatric medicine. It is also called family medicine or internal medicine. This medicine helps to promote the prevention of disabilities and diseases in older adults (Kagan, 2010). The physician who administers geriatric medicine to the patient is called a geriatric physician or a geriatrician. In other words, Geriatrics is the ‘care of elderly or aged individuals’.

As said above, my patient is a seventy-five old African American male. His name is Caleb Rama. ...

CULTURAL POLITICS

V92CUP The Contestation of Power within Modern Day Belly Dance: A Cultural Politics Approach Introduction The origins and purpose of belly dance have no clear historical background. However, it has a very strong root from the Middle East and has spread into the Western world today. More and more women are getting involved in this dance as they try to embrace their feminine essence. Unfortunately, due to its historical background, belly dance has a negative connotation to it because of the erotic attachment behind its dance movement. Despite the said fact, men and even women would still spend money ...

A. Develop a distribution pattern that meets availability and demand constraints and minimizes total shipping costs for Shuzworld, utilizing the appropriate decision analysis tool. 1. Submit a copy of the output from your decision analysis tool of choice. a. Explain why you chose the decision analysis tool you used. Shuzworld, a manufacturing company has a total of 3 production plants. In addition, they also have 3 centrally located warehouses, which also contain the most successful line of women’s shoes. The manufacturing plants were identified to be Shanghai, Shuzworld Hangzhou, and Shuzworld Fuzhou. As per the analysis which had been ...

Introduction

Coevolutionary gaming is one of the simulation tools used in facilitating strategic planning in businesses today. Most global companies employ this tool in developing strategies that make them fair ahead of their competitors and enjoy the global competitive advantages. The coevolutionary gaming tool finds much use on the defense industry. The military used it in planning their war attaching techniques because it gives a clear analysis of what the enemies might be planning. On the business context, the tool is used in decision making process whereby concrete decisions are made concerning a market entry strategy both for local and global markets ( ...

1. Introduction

During early days people do physical work to complete a job. The physical work made by the people made them tired and people time gets wasted. Let us take a construction work. The construction works involves major labors to construct a building, in early days people spends major time to construct a building. The labors have to give more energy to construct the building. Some of the labors even sacrificed their life by accident case inside the building. But today’s technology makes sure that the construction of any type of building can be modeled and executed within a year. Labor also ...

SYSTEM INTERFACES AND DESIGN

The need to have patient navigation capability is an important aspect for any cancer center. There are many benefits that are associated with the development of this database. Having the system integrated to the corporate information system will have connectivity issues with the wider Cancer Center Network. Having a database that will help to navigate the patient information will save the nurses from having to wait for longer periods of time. This is an important aspect that will improve the business process of the cancer center personnel. There will also be better management of the patient data. With the growth ...

Shuzworld is considering the possibility of opening a new store. They have the option of building a new stand-alone store, opening a store in a strip mall, or not building one at all. Shuzworld needs to decide if they should purchase market research.

Decision tree for Shuzworld’s is constructed regarding the possibility of opening a new store. In the case study, the stand-alone store would see good profits of $700,000 as long as there’s a favorable market and the opposite end in losses would show $400,000 in case the market was unfavorable. The strip mall store could show profits near $ ...

Lathes are being used since a long period of time and tooling and designing method, and the purposes for which it has been used most of the times are drilling and boring holes that are usually conical or cylindrical in shape. The manual lathe usage primarily depends upon the machinist and the experience in the designing field. With time there has been a major improvement in the efficiency and quality of part development, which is a result of numerical control into the process of tool designing and the use of lathe. The most advanced and the latest technique in this area is ...

INTRODUCTION

Human beings have always had a fascination with primate species; in them, many see similar morphology, behaviors and interactions most reminiscent of humans. This has spawned years of endless dedicated study and the development of a new anthropological branch, primatology. These are people dedicated to the understanding of how primates live, how they structure their society, how they learn and how intelligent they are? The great apes, like Chimpanzees and Gorillas have recieved a great deal of attention, but they are not the only primate species of great interest to primatologists, the capuchin monkey is, as well. Capuchin monkeys got their name ...

Define class characteristics and list two (2) examples. Define individual characteristics and list two (2) examples. From the following photos, discuss the class and individual characteristics.

ANSWER:

Scenario: You arrive at a breaking and entering to process the scene. The glass to the back door of the residence is broken and it appears that the suspect may have cut his thumb or finger. The suspect has taken a lap top computer that was sitting on the dining room table. No other items are missing from the residence. The suspect exited through the back door. List and describe the 3 main types ...

The current workflow is analyzed with a view of finding the most appropriate workflow that will be more effective than the current one. Shuzworld has to consider a number of things considered in this scenario to be able to enhance with efficacy the productivity of the company.

The table shows the production time for the boots.

The above shows the graph of the time against projects Looking at the graph, the projects that take the highest time is A, D and H. the high level of the three projects reduces the amount of G and, therefore, Shuzworld need to reduce the level from eight to five as is illustrated ...

Assignment 1: CHCAOD408B and CHCAOD411A

Assignment 1: CHCAOD408B and CHCAOD411A 1. What are you required to discuss with a client prior to an assessment? Although the exact sequence for preparing a client for an assessment might vary across different organisations, the personal/organisational introduction should always be the first step because it allows us to engage in small talk, establish rapport, and it makes the client feel comfortable. However, in addition to establishing rapport, this phase of the meeting also serves for the purpose of observing the client’s reactions and behaviours. Examples of presenting behaviours in clients with a history of alcohol or other drug ( ...

Give five reasons the tool would be useful for green building analysis.

Data that can be obtained from a tool like Athena may be used to generate energy and emission results. The results are then submitted to a GB tool which in turn generates a score that is directly related to material choices. The Canadian green building challenge team has been using this process since 1998. The GB tool uses a crude calculator in order to have embodied effects. Furthermore, it uses the same input data which is used by those without access to ATHENA or any similar tool. The limitation of this approach is that it is regional sensitive, and it is important ...

Churchill, D. (2009). Educational applications of Web 2.0: Using blogs to support teaching and learning. British Journal of Educational Technology, 40 (1), 179-183.

This article reported the results of an inquiry that explored the use of blogs in a post-graduate class. The exploration was conducted for one semester where the author identified the ways in which the use of blogs supplemented classroom teaching and whether these led to a better learning experience. Results showed that blogging could be an effective tool in education. They also showed that the blog-based activities that were most useful in learning were the previewing tasks ...

Abstract

Lathes are being used since a long period of time and tooling and designing method, and the purposes for which it has been used most of the times are drilling and boring holes that are usually conical or cylindrical in shape. The manual lathe usage primarily depends upon the machinist and the experience in the designing field. With time there has been a major improvement in the efficiency and quality of part development, which is a result of numerical control into the process of tool designing and the use of lathe. The most advanced and the latest technique in this area is ...

Computer Ethic Monitoring

Introduction

Computer usage is very vital towards the success of any organization. Many companies store data on the computer systems and many forms of workplace communications are done through the use of computers. The use of computers has made it possible for the efficiency of different business activities to be improved further. This has also made it easy for electronic monitoring of employees in a given firm. It is very important to carry out monitoring of the employees so as to ensure the survival of the business. However, the process of monitoring the employees can also be regarded to have ...

Latasha Vaughn

Week6 The assignment in week 5 involved creating a training method for police recruits in the training academy. The first training method selected was an audio-visual training system for crime scene training: hair. This method was selected as it offered a number of advantages to both the trainer and trainee.

Pre-test instrument

The pre-test testing instrument to be used is going to be a questionnaire targeted at the trainer. Before using the training method suggested, other methods of training had been used. These may include direct training in classrooms. When switching to this new instrument, there were a number of fundamental changes in which ...

Research is an important tool in the identification of a problem, collection of data, data analysis, problem justification and solutions. The type of data collection tool that a researcher decides to use needs to be trustworthy, useful, quality and rigorous. The paper would discuss validity and reliability, which are the tools used in measuring trustworthiness, usefulness, quality and rigor of a data collection tool (Nieswiadomy, 2012).

Reliability

The quality of data collection tool is a critical part of qualitative research, one of the most important elements used when gauging quality is reliability. It is concerned with consistency, dependability and reproducibility Halloway & wheeler (2010). Reliability ...

Product

When developing “No! No!” Hair removal or any other product, it is significant to remember that customers have different tastes and preferences (Shapiro, 2004). This is the reason this hair removal tool is defined as a painless, effective and professional hair removal tool. The tool is developed in the sense that the customers are satisfied with it services and are comfortable to apply it as a home tool. Unlike other tools No! No! is developed to accommodate people with different skins and is suitable for both men and women. The developers persistently make sure that this tool is up to date ...

The history of human evolution has always been a heated topic for debate; many theories abound as to what factors led to the evolution of apes into man, using the concepts of trait adaptation, among others, to help explain why we became what we became. There are those who believe that the major contributing factor was the development of language, or the forming of groups with hierarchical structures. Others believe that the development of monogamy as a social concept is the most important factor leaving to the evolution of humanity. However, it is my concerted belief that the most important contributing ...

Lymphoedema is a disease which manifests its self with swelling of the arm, leg, breast and any other body parts due to accumulation of fluid in the tissues of the body. Technology has proven to be useful as experts can help their patients manage lympoedema through the use of telephones. This has been a success to many countries because some areas are so interior and the local hospitals do not have services for managing lymphoedema. Patients are able to receive theraphy this disease from the comfort of their home. Assessing patients suffering from lymphoedema involves the developing of a telephone as ...

Performance plan

There are various equipment and DTEs which are found in the Fantasy Games network. With the advent of the internet and computer networks, there is the need to have a network in the organization so that resources are shared and communication will be effected. With the growing nodes that are seen to be growing by the day, there will be need to have monitoring of the network.

Variables in the network

The network has a lot of equipment and computing devices. These devices will need to be monitored so that their management is well taken care of. There are servers, routers, firewalls and end user ...

EXECUTIVE SUMMARY

With the passage of time, companies have enhanced their product offerings. Many of the products now are directly targeted towards the younger generation which leaves the older consumers with less motivation. In order to change such perception of the older consumers, the Amazon Kindle Fire HD is aimed towards such market segment. In order to persuade the older consumers regarding the product, marketing communication mix would be used. Such a plan would help in promoting the brand in the older consumers due to its facilities i.e. convenient storage, portability and versatility. In order to persuade the older consumers to purchase ...

Management

As a human resource manager there a lot of things and issues that are at stake especially if the business are destined to perform well. It is needless to stress and mention the fact that a business or any firm or organization had several aspects at stake and involved before output can be realized. It involves issues of motivating and encouraging the staff members so that they would give all their best for the achievement and organization of the business. It is to say that there must be proper and fair techniques of performance appraisal where quality and excellence on the part ...

Fig 1: NDRC Techniques

Introduction

Non-Disruptive Road Crossings are manuals which outline unifying and standardizing measures of Road Engineering Practices. The significant objective of the project is to enhance the management, planning, design, construction, maintenance, and operation of all roads and related infrastructures to ensure a safe and uniform operational and structural capacity throughout the road network in Dubai. The complexity in road construction and to some point other engineering projects leaves very little to be argued about on their significance with respect to the influence they have on the environment. It is a fact that projects like roads, bridges, and dams ...

Fig 1: NDRC Techniques

Introduction

Non-Disruptive Road Crossings are manuals which outline unifying and standardizing measures of Road Engineering Practices. The significant objective of the project is to enhance the management, planning, design, construction, maintenance, and operation of all roads and related infrastructures to ensure a safe and uniform operational and structural capacity throughout the road network in Dubai. The complexity in road construction and to some point other engineering projects leaves very little to be argued about on their significance with respect to the influence they have on the environment. It is a fact that projects like roads, bridges, and dams ...

Introduction 4

1. Traceroute with Pingplotter 4

Functional Description 4

Testing and screenshots of Traceroute 4 Conclusion on Network Tool 5 2. Angry IP Scanner used find that is using my network 6

Functional Description 6

Testing and screenshots of Angry IP Scanner 7 Conclusion on Network Tool 7 3. Wireshark 8

Functional Description 8

Testing and screenshots of Wireshark 9 Conclusion on Network Tool 10 4. Online Speed Test (Bandwidth Test) 10

Functional Description (Expectations, Reason Chosen) 10

Testing and screenshots of Bandwidth Test 11 Conclusion on Network Tool 12 Conclusion 13

Introduction

This paper investigates and analyzes a variety of Network Protocol Tools. For this purpose, the paper ...

Introduction

Multi-axis milling machine typically refers to computer aided machine that helps in rotating tools used in milling away excess parts of metals in the manufacturing process. The machine supports rotation around single or multiple axes and able to support 3-5 axes translation. In the recent years, various computer softwares have been made available to help in automation of the multi-axis milling machine (Elber,1992). The enhancement of the global technology and multinational enterprise, more reasonable research and development have made most of the producing organizations to adjust, design and configure these tools to match the supply chain system. ...

Executive summary

MathCAD is a crucial tool for applying in mathematics and especially mathematics for engineering. The software provides an environment of inherent interactivity with scratchpad, real math notation, automatic recalculation and fully integrated project components. MathCAD yields results when making crucial calculations. This is achieved through integration of text, math and graphics into a single worksheet. This in turn, is visualized, illustrated and annotated in all the calculations. MathCAD runs in computer operating systems like MS Windows 2000, XP, Vista, Windows 7and windows 8.

Objectives3

Activity procedures.3 Tool bars..5

Matrices9

Conclusion 13 Objectives Activity procedures - Load the MathCAD software ...

SBAR is a technique used in aiding proper communication within heath care facilities. It traces its origins to the naval military procedures and was later on structured by Suzanne Graham, Doug Bonacum, and Michael Leonard OF Kaiser Permanente to used in health care. The SBAR technique stands for Situation Background Assessment Recommendation. It is defined as a standard communication protocol that aids in the reporting of changes in patient status or deterioration that may be observed between healthcare services or shifts. It was previously used for acute care communication between physicians and nurses but currently it is being used for communication ...

Management finance

Part A:

According to the case, Charles Ltd. Department, because of the implementation of the new budget system is faced with the increased workload. This is because the system is effective, the department's power to enact budget Charles Co. said their goal is to estimate and predict facts (Fabozzi and Peterson Drake, 2009, pp.15-25). These must be analyzed by the selected company's management to ensure that they can achieve a reasonable and reflect reliable data. This concept would increase work that was previously absent in the departments. In many cases, this requires expert who is an estimate of the ...

Introduction

The use of technology in aiding nursing education has helped to change the teaching strategies used and improve learning outcomes. The same approaches can be used when teaching populations about heath topics. The use of technology allows a community health nurse to combine different media to god effect, thereby enhancing learning. This is especially important for populations that are not proficient in English. Multimedia presentations that incorporate texts and graphics help them visualize the concepts, thereby mediating for the insufficient English skills. This paper outlines the concept of a teaching tool for immigrant Chinese population aged forty years and above living ...

` Literature Review Will the implementation of strict count process and other means lower the retention of surgical items (foreign bodies) in patients and during surgery and how does it help to increase patient safety? Ali, A., Omar, B., Okacha, N., Abderrahmane, A., & Mohamed, B. (2012). Paraspinal Textiloma. After Posterior Lumbar Surgery: A Wolf in Sheep's Clothing. World Neurosurgery, 77(2)375-380. doi:10.1016/j.wneu.2011.07.017 Paraspinal Textiloma is a complication that is common after posterior lumbar surgery. This study aims to inform spinal surgeons and radiologists on the experience of Paraspinal Textiloma so as to minimize unnecessary death that is ...

Machining Technology is a manufacturing process that involves the foundational and basic principles about cutting via the application of various cutting tools. Despite the many modern technological advancement in this field of material science, it cannot be denied that there are the same principles involved both from the traditional and modern up-to-date techniques. Machining is the application of process used for shaping metals as shown in Figure 1. Figure 1. Cross sectional view of the machining process. The machining technology is applied in various work materials especially in the use of metals. It is used to shape and ...

Description of the Software

Advanced Research has been a victim of cyber criminals and plans to install security software to protect its vital information from leaking in the market to its competitors. A software tool Microsoft Baseline Security Analyzer (MBSA) is chosen to protect the data of the company from cyber criminals. The software tool assesses less-secure elements and missing security updates setting in Microsoft Windows to prevent information from being stolen. Internet Explorer and IIS web server are the components of Windows on which the software tool can be easily installed and can work efficiently. The software tool has a Freeware license and works ...

Social media – the marketing tool

The past four decades have experienced a radical change in the manner business is conducted mainly due to globalization and the breakthrough in technology. One of the emergent marketing tools which have changed the manner in which enterprises engage in business activities is social media. Social media is widely used by business enterprises as well as individuals to connect with people. It is one of the most favoured medium to socialize. These tools help firms to win the loyalty of consumers by establishing deeper level connections (Neti, 1). Social media as a tool for marketing has helped firms to socially ...

Introduction

Autism is a neurological disorder that affects personal, as well as, social behavior of an individual. Autism affects personal and social communication skills, verbal and non-verbal communication and social interaction skills. Symptoms of autism starts showing from an early age when child is even below three years. Autism impacts functioning of the brain and processing of information by changing the organization and connection of nerve cells with their synapses. Development in children is not uniform, each children shows their own rate of development. However, there are certain milestones such as emotional, linguistic, behavioral and physical that should be achieved by ...

Training is currently recognized in every aspect of virtually all progressive organizations. It stands as one of the most critical parts in any organization’s overall strategy. In all organizations, there is a need to establish all the skills that may be required so that there is efficiency in the management of the organization. The necessity of training arises due to an organization’s goals, values and strategies such as a necessity for the improvement of performance, advancement in technology and/or employee professional development. This is why training ranks among the best strategies or departments in any company. A professionally run ...

Introduction

Marketing is an important concept that needs a thorough analysis. This paper will focus on the various case studies and how their decision making affect the marketing process. Before marketers enter a market, they should understand how the market operates. They should also find out if there are prospects of a new market. Market analysis forms an indispensable part of the marketing process. The need for market analysis is because the market will be understood and the organization, which is to enter the market, will be prepared to enter the market. The choice of the market entry strategy is a crucial decision to ...

The web based compensation tool is an online system that helps the organization in collecting, analyzing, manipulating, storing and distributing data as well as employee’s compensation information. The increased technology use has made it significant for a majority of companies to adopt the web based compensation tool due to the benefits that it accrues to the implementing organization. It is further revealed that the process of implementing this new tool of compensation is quite easier to execute for the company (Gueutal & Stone, 2005). The web based compensation tool has various advantages that make it suitable for use in an ...

Following the American Psychological Association’s Guidelines

Recessions and Recovery Strategies Economies are alive organizations which sometimes gets problems similar to our bodies. As we grow up and develop, we catch some sicknesses and similar to us, economies also grows up and sometimes they face some crisis and recessions. During recessions, consumption level and income level of people decreases and economy slows down. In a slow economy, investors do not prefer to make new investments and even during a severe recession, they might stop their all investments in the economy. As we know, economies have a cycle and when it slows down all parts in the economy slows ...

Soldering Tool (Old Design)

New Design Perspective Problems with the Current Tool Design - It is difficult to see the point of application when using this tool. - The operators are gripping the tool unnecessarily tightly. - The power cord tends to get entangled. - Operators complain about wrist pain.

Design Solutions

The difficulty in seeing the point of application in the old design can be eliminated by tilting the handle to near 90 degrees angle. In the old model, holding the tool on a horizontal position makes it difficult see ahead at the tip of the iron rod because the ...

Introduction

Laser technologies are used in different fields such as instrumentation, micro manufacturing, medicine, imaging and communications. Application of lasers to micro manufacturing is known to have a number of benefits which include capability of remote processing, noncontact processing, no tool wear, automation and the possibility of machining brittle and hard materials. The use of laser processes for specific manufacturing processes has been around for decades. However, the share of micro applications within the whole laser market was a minor one, with laser welding and cutting dominating the laser application sector. With the increase in miniaturization and higher integration of consumer products, ...

There are millions of people that use Facebook every day. For some it is a tool that is very beneficial to them. It is a way for them to stay connected with family and friends. They can even go on there and hook up with somebody that they have not seen since childhood. Also, people have used it a tool to find jobs and even do crazy things like promote their business and sell their furniture. Furthermore, Facebook can be retrieved for people from young to the very old and it is also user friendly. For instance, using Facebook turns out to ...

Statement of originality

This research paper have been written by (insert your name). I am therefore requesting you kindly and humbly not to copy any part, distribute, transmit or store any part or all parts without the permission of the author as this shall lead to serious consequences.

Acknowledgement

I would like to take this opportunity to appreciate------- for ensuring that this work becomes successful. I would also like to acknowledge our almighty for giving me health and protecting me during the entire process as I write this research paper. Not to forget my teachers who instilled relevant knowledge and skills in me ...