Engineering College Essays Samples For Students

My desire to study civil engineering started when I visited Manila, Philippine for a vision trip in 2010. I wanted to study civil engineer so that I could help developing countries to improve their roads. In Manila, the road system was terrible. The roads in Manila lacked road signs such as pedestrian crossing. I am a warm, sympathetic and heart person. My personality indicates that I am creative and organized especially when assisting people to achieve personal objectives thus my desire to study civil engineering.

The work of Civil Engineers entails; designing, supervising, operating, constructing, and maintaining great construction ...

The engineering field is extremely wide as it has been segmented into different sections with each of the sections unique. This memo aims at developing an exclusive argument on the relationship between mechanical, electrical and civil engineering. Although, each of these branches is unique they aid in the development of unique structures that define their force as the main engineering branches. Therefore, the memo will aim at bringing up a conclusive argument on the significance of engineering in any form of construction where systems are required to be installed in the form of computers as well as communication systems. ...

Everywhere in the world today we can see prevalence of engineering. From pyramids to the Golden Gate Bridge and the Shard of London, we can see miracles of Civil Engineering everywhere. And the excitement and curiosity; to understand how such seemingly impossible projects were materialized into standing realities, was my prime motivation to study Civil Engineering.

Being attracted to huge structures, I always found myself dwelling deeper into their existence, rather than just marveling at their beauty. Whenever I look at a historical building or a modern skyscraper, I find myself thinking about how it must ...

Utility which forms the basis of Utilitarianism describes a morally right act if pleasure is produced and an act is morally wrong if pain is produced. This has the conclusion is that it’s better to be a human dissatisfied than a pig satisfied; better to be a Socrates dissatisfied than a fool satisfied. In the case of the Aberdeen three where the Aberdeen Army Base tested chemical weapons that weren’t properly treated and stored. Utilitarianism describes to us a scenario depicting responsibility should rest on that person on duty and that right ethics leads us to proper ...

- Academic goal: Improve my mathematics, geology, physics, and chemistry scores in order to apply for a petroleum engineering course in my top three universities by May
I have done my research on the current international job markets and realized that, there is an increasing need for the petroleum engineers in the extraction and other processes in oil drilling. Coupled with my interest in engineering, I have learnt that I need to develop my mathematics, geology, physics, and chemistry grades as well as improve my GPA to at 3.7 in order to successfully apply for the petroleum engineering in my ...

Reflection Paper : Engineering Osmosis for Desalination, Separations and Power Generation

Engineering Osmosis is a transfer process that uses semi-permeable membranes. It aims to produce good and safe water from various sources. This technology has been devised for various technologies that serve as a potential platform for sustainable water treatment, separation and power generation. It needs to be introduced and adopted by various industries. This engineering technology is expected to produce clean and safe drink from any water source using lower energy. This innovation is still subject for deeper research as industries strive to get the perfect solute customization.
As discussed, there are different types of solute used: recoverable, useable ...

Management

We all know that systems engineering has a major role to play in business and defense industries, but has it ever occurred to you that system engineering is also a major player in the healthcare sector? On March 24, 2014, Mr. Dr. Steven W. Badelt of Suttons Creek Inc., a seasoned expert in product development, engineering management, business development, and systems engineering, spoke on ‘Systems Engineering in Healthcare.’ Dr. Steven has an MS in Biomedical Engineering from UCLA, and a PhD in Neuro-engineering from UCLA. Dr. Steven has also won several awards in writing business plans, research, and leadership. ...

Management

“On March 20, 2014, Mr. Arnold J. Galloway, Associate Program Director and Part Time Professor, Systems Engineering Leadership Program (SELP), Loyola Marymount University, gave a lecture on ‘Mission Systems Engineering’ (ME). Prof. Galloway holds a Ph.D. in Aerospace Engineering from the University of Michigan, and is a consultant in Space- and Ground-based Missile Defense Systems, and Systems Engineering Processes for Schafer Corporation, WestWind Engineering, Inc., Saalex Solutions, Inc., Ryan Associates, and TASC.
As an expert in Mission Systems Engineering, Prof. Galloway said, that while systems engineering focused on product development, by addressing a customer’s requirement and expectations, mission ...

Management

“On March 13, 2014, we had the pleasure of having Mr. Däl B. Lee lecture us on ‘The importance of Lean in Systems Engineering.” Mr. Lee graduated in Mechanical Engineering and completed his Master’s in Systems Engineering from Loyola Marymount University in Los Angeles, California. While talking on the importance of Lean in systems engineering, Mr. Lee said that horizontal integration was an area that has been forgotten because of the shift in product specifications and responsibilities. In addition to this, Systems Engineers need to focus on developing a sound systems approach. To ensure a sound system, ...

What is Technology?

One of the most important staples of contemporary culture is the prevalence of and reliance on technology. Its uses may be both beneficial and detrimental, as history has shown once and again. Nevertheless, what does this word actually mean? Its common usage only dates to two hundred years ago, while technology itself has existed since prehistoric times. In addition, many people could confuse the concept with science or engineering. Nevertheless, contemporarily, one could define technology as the group of tools and techniques that allow a practical manipulation of nature to modify its value.
One of the most important and ...

Biomedical engineering can be described as the application of engineering techniques and principles to medicine. It is a combination of expertise in medicine, human biology and engineering in the development of techniques and technologies for patient care and healthcare. According to Monzon (277), biomedical engineering is yet to be formally recognized as a profession due to its multi and interdisciplinary nature. As a result, currently there is no distinct field that addresses biomedical engineering ethics. The ethical obligations of biomedical engineers are a combination of both those of medical professionals and engineers. By studying three fields of biomedical engineering, ...

Introduction and History of Open Source Software

As a computer user, most people will be aware of paid software and open source or free software. Windows, for example is paid software product, as the command lines are hardcoded within the software, and cannot be modified without access rights. Open source, as the name suggests, is any free software product that allows the user to use, modify and redistribute the software. Few examples of free or open source software products are Linux operating system, Mozilla Firefox web browser, and OpenOffice suite. The Free Software Foundation (FSF) and Open Source Initiative (OCI) are the two main responsible bodies ...

World hunger is an issue of increasing importance with today’s growing population. One question that has weighed heavily on the minds of agriculturalists, scientists, and public officials is how to feed all of these people. Many people starve to death every day all over the world. Some regions, like many in Africa, experience starvation as an everyday part of life. In an effort to remedy this issue, scientists began producing GMOs, or genetically modified organisms. Otherwise known, as super crops, GMOs were engineered specifically to help with the world’s hunger crisis. While there are many alleged benefits ...

Jean-Pierre Jeunet’s Amelie was a breakthrough in exposing international audiences to French film – not since the Nouvelle Vague era had American interest in French films been so high. There are many factors inherent to the film that contribute to its success, not the least of which is the film’s stylistic appeal – Jean-Pierre Jeunet’s unique, slightly grotesque yet endlessly quirky style made it a very entertaining and unconventional film compared to many domestic and international releases. Jeunet’s use of unconventional coloring and cinematography (making heavy use of CG) modernized the French film in ways previously unheard ...

Introduction

Petroleum is a field of engineering that is deals with activities that are related to hydrocarbon production. The gist of petroleum engineering is the production and the exploration of crude oil; it places a lot of attention on the recoverable volume of the resources to understand the physical behavior of oil, gas and water. The profession of petroleum engineering started in the year 1914 and the first degree in the field was conferred by University of Pittsburgh in 1915. Since its inception, the degree has undergone evolution. The profession has been enhanced probability analysis, application of statistics and the ...

Most of the computer aided design programs that are used today in drafting may seem new to many people even though they have been in use for more than a decade. These programs trace their origin to about 50 years ago. The modern technology designs and drafting are viewed as a result of the sixteenth and seventeenth century development of the descriptive geometry. Most of the work aimed at developing computer aided drafting intensified in the post war era, with many people working at MIT on the numerical control of machine tools and automating drafting and designing.
During the ...

Writing Resources

Most academic and research writing rely on the work and ideas of other people. In IEEE, it is required that these materials used for writing academic or research paper must be cited in the work. The in text citation involved square bracket showing the relevancy of reference. The citations are given numbers in the text consecutively [4] to show the writing resources used.
There are various writing resources that are used in academic and research writings. These include books, online resources like blogs and eBooks, journals, newspapers and magazines. The quality of the paper written will depends on the ...

Introduction

Modifying the genetic make-up of food is a concept which has been around for centuries. Farmers have successfully improved food supply through cross-breeding different plant and animal varieties to develop organisms that yield more, taste better and tolerate harsh conditions. In modern times, this has not always been welcome. The Pure Food Campaign (PFC) was established in 1992 as a coalition of restaurateurs, farmers, animal welfare, environmental and consumer groups opposed to genetic engineered food. Around the same time, the U.S. Agriculture Department stated that it would not regulate production and shipping of Flavr Savr, which is a genetically ...

Chemical engineering is concerned with the manufacture, research and development, sales and use of pharmaceuticals, chemicals, food and consumer goods, petroleum products and many more products. Civil engineering deals with the construction, planning, operation, design and maintenance of systems and facilities to improve and control the environment rendering it suitable for modern civilizations. Mechanical engineering is concerned with machine design, energy production, materials, control and transportation. (Bandura, A., 1997) Computer engineering pertains to aspects of software, hardware, software-hardware trade-offs as well as basic modeling techniques. Electrical engineering deals with a host of issues ranging from delivery and generation of ...

Engineering is a profession which applies the knowledge of mathematics and natural sciences towards producing and manufacturing various engineering systems, structures and components. Engineers are trained in many accredited universities in the world and they meet some academic qualifications to be awarded engineering bachelor's degrees.
Engineering is indeed a multifarious profession as it has various disciplines and subdivisions grouped under it. Before gaining admission to study engineering, one needs to have discipline in mind. This is significantly important giving that the various disciplines handle different aspects of the profession.
Engineering disciplines are largely grouped into four divisions. These include ...

Abstract – Assembly line technology has been inexistence in factories and has been the most widely used technologies in the factories. This is an important technology in engineering. There are developments that are designed to have better procedures and enhancement of the whole process. This paper will focus on new ways in which the assembly line will be improved. One of the ways is to have the system change automatically to new changes that have been introduced to the system. The paper will focus on a new technology where machines in the assembly will have their thinking mechanisms.

Index terms –

- INTRODUCTION
...

Management

There is still a lot of work to do in the field of Engineering Concept of Operations (CONOPS), said Col. James Horejsi, a former Chief Engineer and Director of Engineering and Architectures at SMC. Currently in charge of the Aerospace contract at SMC, Col. James Horejsi spoke to us on February 6, 2014 on the importance of technical integrity. His illustrious career achievements are equally complimented by his wisdom; Col. James Horejsi completed his MS in Electrical Engineering from AFIT and also has 4 military education certifications. In addition to this, he is also the recipient of the Meritorious ...

The article seeks to explain the disaster that occurred in 1986 following three approaches. It was during the launch that the space challenger exploded killing a teacher and six astronauts, a disaster that if carefully looked into could have been prevented following the application of preventative ethics. The author explains that a disaster occurs when certain standards are not observed. In his first explanation for why the challenger failed, the problem was in engineering whereby certain engineering standards were violated citing the flaws in the design of the field joints, in the booster. The second problem lied in management ...

How would we equalize furnishing the kids with innovation and going with abilities they will require as powerful advanced subjects of the 21st century
This was the subject of a discussion “Consider How Technologies You Learned - Once Thought To Be Cumbersome” I was asked to give as of late. It kept tabs on two accepted abilities: handwriting (especially writing) and another ability I call telephone.
We determinedly command the instruction of writing, roused, partially, by the French National Program. Then, in the United States, 46 states have embraced Common Core State Standards, which calls for a person’s ...

Management

Today, we have the pleasure of having amongst us, an eminent personality who is an author and lecturer, Mr. Scott Jackson. Mr. Scott Jackson gives periodic lectures on Systems Engineering to personnel from INCOSE, ASME, the Chinese Society of Engineers, NASA Glenn, and LMU among others. While he graduated in Aeronautical Engineering from University of Texas, he has a Master’s in Engineering from UCLA. He also passed his Master’s degree in Liberal Arts from the University of South Australia. He is here to talk to us on safety issues. Accidents are common phenomenon. Whether it is man-made ...

Management

Softwares are one of the most important tools of trade these days. Therefore, it is very important to take special care in the development of these softwares which are designed for the business purposes. Decision Support System (DSS) of the organization is used by the managers of the business to make quick decisions. There are a few approaches to develop DSS, which can be used when developing the DSS for any specific organization.
Software prototyping is one of the approaches used by small or low budget companies. These softwares are not the fully functional software. In this approach the ...

I will bring diversity to the Nevada University Engineering Class from my Vietnamese Immigrant background and personal interests. I am an immigrant of Vietnamese origin. My family immigrated to the United States four years ago. I will teach my classmates about Vietnamese traditions, such as cookery, social life, and spiritual beliefs among others. I also expect to learn other cultural practices from different parts of the world from my classmates. I am a bright student and my current GPA is 3.98. I am ranked among the top performers in my class despite the learning hindrance of a language barrier ...

Genetic engineering and sustainable production of ornamentals: current status and future directions

It is evident that in the recent times technological advancement has led to the growth of various sectors of the economy including the area of scientific research and development. Owing to the rapidly growing population, researchers and scholars have sat down to come up with remedies so as to curb the looming problem food insecurity across the globe and through the last decades, health-friendly farm produces have been engineered after a series of laboratory experiments and this effort has yielded fruits through the production of certified, food production (Lütken, et al. 1141). This has been set forth to ...

Philosophy and Engineering

Introduction
Philosophy and electrical engineering belong to the same field, i.e. science, but the scope of the study of both are different. This has become a subject of study for many researchers in order to find out the level of relationship between the both.Philosophy can be defined as thelearning about reality, evidence, environment and significanceand importance of life, whereas, electrical engineering explains real-world use of electricity its production, distribution and etc.Engineering has its specificsource ofexistence, its particular dimensions and regulations to conduct its experiments and processes.
Philosophy of engineering consists of the impact of the work of engineers on ...

Personal reflection

I have learned that since the advent of technology, the changes are affecting all fields including engineering. Currently, companies have introduced computer-aided designs that have revolutionized designing and analysis processes. Currently 2D and 3D dimensions have been put into using as technology replaces the traditional engineering processes. One can create as many prototypes and simulation of inventions using the technology than before that are finally produced. Such reduces the cost of production since one does not require actual experiments, and consequently, the final products are affordable. It reduces time, risks, and also increases precisions of the overall products. However, ...

[Company][Address 1]

Dear Sir or Madam,

I am writing to you on behalf of the University of Michigan, where I am a post doc student and a research assistant. I would like to recommend Sam for computer science programs for the graduate school. I am delighted to be called upon as a reference for this recommendation since I was impressed by the skills Sam showed during the summer research project. I would highly recommend him for the admission. I am confident that this new endeavor will bring a priceless experience and begin a wonderful working relationship.
I have no doubts when putting ...

Answer Question#Z

Sustainability is a process in which what is consumed or used is again replenished at a different point in the process cycle, so that one ends up with the same conditions at the start or end of the process. For example, the water cycle is a natural sustainable process. Sustainable processes can theoretically go on and on indefinitely. In a society, development of any kind requires infrastructure which is in the forté of the Civil Engineer. Therefore, how can sustainability be defined from the Civil Engineer’s point of view?
The American Society of Civil Engineers (ASCE) defines sustainability ...

The field of mechanical engineering is undergoing tremendous development in the wake of technological advancement worldwide. Every institution of higher learning is trying to incorporate best practices into their system to ensure that the students grow to be well-informed professionals when they ultimately join the labor market Maier & Rowan (22). However, not so many of these institutions are teaching their students to grow up into holistic individuals with admirable capabilities for oral and written literature. Most of the schools emphasize on writing, literature identified through research to teaching their students. Oral skills have been ignored for long. The job ...

The first event attended was the winter proposal workshop held on Friday November 7 at 3 PM. The workshop was conducted in Room 200 of the Cline library. This was a mandatory event in order to submit a proposal application.

Summary of the content from the workshop:

The main purpose of the workshop was to introduce the NAU Green Fund and the importance of the proposal. The workshop also provided the participants with information on the importance of the proposal as well as some of the previous projects. Some of the previous projects included sustainability maintenance landscaping, and the ARD building Wind Turbine just to mention ...

Careers that involve the application of mathematics, science and engineering skills contribute majorly to the economy. Despite the fact that women have made progress in their education in the past 50 years, the disciplines that involve mathematics, science and engineering courses are still dominated by men. This has been attributed to several factors, like the social and environmental barriers. The negative attitude that women have towards these subjects is the primary reason they chose to study other disciplines. The attitudes are mainly shaped by the societal norms, the legal system, and the professional practice that the women get.
The ...

The work that has been stated have some features that make it defined to be a project. The first definition is that it has a start and end date. The project has been defined to be having the start and the end date. The manufacturing of an actuator has been defined and will have some end date. The people who handle projects will ensure that they get out of the project as fast. The end is known once the project starts. There is even time that has been associated with the different tasks which have been identified. The principal ...

Mechanical Engineering is a branch in the field of science that encompasses a large field of designing and manufacturing small individual parts and devices, as well as large systems. The branch is at the heart of moving products from ideas to the marketplace. The branch of engineering involves creating products that will withstand different forces and the thermal environment to ensure they function properly. It entails the design, manufacturing, analysis and maintenance of mechanical systems using principles of materials science and physics. Mechanical engineering is not only concerned about functionality of products but also about aesthetics too. In its ...

Could this be the end of the world? Scientific estimates point hands to the fact that the global oil reserve is running out at a fast rate and might get exhausted in the next 40 years. How true is this in the presence of the fact that the billions of barrels of crude oil many OPEC countries claim to have? If indeed the world’s oil reserve is running out, then how is this going to affect the civilized world: developing and developed countries. How are we supposed to adapt our life to suit this doomsday? Of course, all ...

My name is Majed Alshammari from Saudi Arabia. I have been serious with my work since I started schooling back in my home country. I have been particularly very focused and hardworking in all times and that explains the one main reason as to why I study in America. I have had dreams of becoming an engineer from tender ages. It is my endeavor to seek to help the world in my engineering career. Since I was young, I was fascinated by the great structures I would see in pictures and in the cities. I never knew who constructed ...

Introduction to Electrical Engineering

Electronic gadgets are in great demands today because of the evolution of high technology and advancement of internet connection. People are always finding something new, so, many companies are giving funds for research. With the help of electrical engineers, companies are providing new gadgets every now and then to surpass the features of the previous gadgets that they have been produced.
In order for the students to solve complexities of a problem, electrical engineering program gives an opportunity to learn new things by experimentation and analytic solving. Therefore, this program mainly tackles mathematics and science. Because of experimentation and ...

Summary:

A client who is the owner of a 60-year old apartment block has hired engineer A. His work is to investigate the structural integrity of the building. The engineer has agreed with the client that the report of the structural integrity test of the building will remain confidential. The client has informed the engineer that he intends to sell the building as it is and no corrective measures will be taken if any faults are discovered. During the course of the work, the engineer finds that the building is structurally safe. However, the client also confides in the engineer ...

Fluid Mechanics is a branch of engineering study and it deals with various properties of fluids. In our daily life we use various types of fluids. Most of the fluids are readily available and have some excellent properties. Significance of Fluid mechanics is to know how the fluids and its various properties can be used in our daily life. This part of engineering is integral part of main stream engineering like Civil Engineering, Mechanical Engineering as well as Chemical Engineering as these brunches of engineering often deals with fluid. In this essay various aspects of fluid mechanics and its ...

This memorandum provides guidance on the types of surveying that a civil engineer is allowed to carry out in the state of Arizona pursuant to the purpose; definitions section in the Arizona Revised Statutes (ARS), Title 32, Chapter 1 and Article 1.
The state of Arizona identifies an engineer as a person who has special mathematical and physical sciences skills, and has gained engineering design and analysis principles through professional education and practical experience (Article 1, paragraph 16). The person should also be qualified to practice engineering which should be certified by registration as a professional engineer. Qualified civil ...

Civil engineering is a field that entails planning, developing, designing, rehabilitating, managing and building physical elements in the surrounding. This field of science comprises of several sub-disciplines which might include environmental, transportation and structural engineering, among many others. As a field of engineering, civil engineering has various careers. One can become an environmental engineer, a structural engineer, construction engineer, water engineer among several other careers (Riihelä, 237).
There are several job openings under civil engineering. For instance, one can become an environmental engineer. This career entails one planning and designing projects that promote sustainability in the society. However, this ...

Genetic technology

Question 1
Genetic engineering is the uninterrupted manipulation of the genome of an organism using biotechnology skills (Dahiya et al., 2006). Genetic technology or rather genetic engineering involves isolating, copying and transferring genetic material from one organism to another; the practice involves the use of biological systems (CBD, 1992). The techniques used in genetic technology that include isolation of the gene of interest, cloning the identified gene in a suitable host and finally using gene promoters to improve protein expression (Houdebine, 2009). The genetic Technology article elaborates the importance of Genetic Technology in biology as will be discussed in ...

Lawrence Page was born in East Lansing, Michigan on 26th March 1973 to parents who were computer experts. His father, Carl Page, was a pioneer and expert in computer science and artificial intelligence. On the other hand, his mother taught computer programming at university. This made Larry Page to be exposed to computers and the internet. Lawrence was admitted to the University of Michigan in the faculty of engineering that later earned him a Bachelor of Science degree in engineering. After his bachelors, Lawrence decided to pursue a career in computer engineering. He enrolled at Stanford University and studied ...

Response Paper about Civil Engineering

Engineering contains countless open doors and claims to fame. Utilizing the standards of science and science, environmental engineers create answers for environmental issues. They are included in the water and air contamination control, reusing, waste transfer and open wellbeing issues. Environmental engineers conduct perilous waste administration thinks about in which they assess the essentialness of the peril, offer investigation on treatment and regulation, and create regulations to forestall disasters. They plan metropolitan water supply and modern wastewater treatment frameworks. They lead investigate on proposed environmental ventures, break down experimental information, and perform quality control checks.
They give lawful and ...

For ages, knowledge invariably was the most valuable thing in the world. There are many specialties and professions that have appeared not long ago so nowadays it becomes relevant for people to look for the ways they can plan a career. This paper contains reasoning about career planning that surely has many preferences. Since I am studying a mechanical engineering, it is also a question of the manner in which career planning has helped me.
Perpetual knowledge is an advance of knowledge that induces a person to become reasoned. Thus, person’s goal is about to receive the different ...

Engineering and Profession 06-85-118

Economic Freedom
Economic freedom is very crucial because it affects all aspects of an individual’s life. A society with a high level economic freedom leads to lower poverty, higher income, longer life expectancies, less unemployment, and cleaner environments. Economic freedom also leads to higher quality life and improves well-being. Economic freedom key ingredients are voluntary exchange, personal choice, protections of property and persons, and freedom to compete. When economic freedom is present in a society, individual’s choices will decide how and what services and goods are produced. People often find it attractive engaging in exchange activities that ...

Food and agriculture industry reels under a significant moral issue, i.e., pursuing with genetically modified crops and food products. These food products are produced by inserting foreign genes into plants, animals and microorganisms. As such, environmentalists, animal-rights proponents, and socialists have raised various concerns ranging from possible harms to ecosystem, environmental catastrophe, risks of food security for future generations, and the promotion of exploitative science. Some ethicists and Philosophers have called it unnatural, a way towards commodification of life, harmful to other living beings, and playing with God. On the other hand, supporters approve GM crops on accounts of ...

Systems engineering is a discipline, which is involved in the design and management of complex systems over their lifespan (Blanchard, 2008). An operations coordinator is a person in charge of organizing and coordinating the activities of different individuals in a company. An operations coordinator deals with many individuals in his work. The coordinator has to ensure that all the activities being carried out by each individual or department work in harmony to meet the overall objective of the whole organization. A coordinator has to have good management skills in order to work properly. The operations coordinator also has to ...

It has always been my choice to pursue an engineering-related degree ever since being exposed to solving mathematical and scientific problems. My technical skills were further honed as I was given chance in my school to formulate ideas and design and develop new equipment that will be useful in making life simpler. Since I consider myself as someone good in the field of math, science and even computer sciences, I have chosen to pursue a career in electrical engineering.
An electrical engineer works on solving problems, testing equipment, designing new equipment and developing existing equipment which are related to ...

Over the years, the understanding of the human genome increases to the point where the every gene and chemical base pairs of the human genome has already been mapped out (Catalano, np). What it implies is that if the effects and interactions of the genes would be fully understood, then humanity has the power to control and manipulate the characteristics of an unborn child. Of course, this action will be subjected to moral and ethical issues. Nonetheless, its practical uses, when fully understood, will be ultimately useful. Therefore, engineering human genetics should be allowed for medical purposes (Sousa and ...

The National Academy of Engineering (NAE) challenge selected for this paper is the one that relates to the process of making solar energy economical. Currently, it is the most recent grand challenge identified in the NAE’s website. According to the NAE grand challenge brief “as a source of energy nothing matches the sun; it out-powers anything that human technology could ever produce” . This particular NAE grand challenge describes the current challenges that government, government agencies and departments, and non-government organizations face when it comes to the mass production and distribution of solar energy production equipment. In order to ...

Engineering Disciplines Handout - Lists useful information about the different disciplines

Engineering disciplines can be divided into four categories based on their size. The first is the ‘Big Four’ Disciplines, which consist of Civil, Computer, Electrical, and Mechanical engineering. This disciplines account for almost 67% of the bachelor’s degrees awarded annually.
The second is the ‘medium four’ disciplines, which include Aerospace, Biomedical, Chemical, and Industrial/Manufacturing Engineering. This account for 20% of the bachelor’s degrees awarded annually.
The third is the ‘smaller ten’ disciplines, which include Agricultural, Architectural, Engineering Management, Engineering Physics/Engineering Science, Environmental, General Engineering Studies, Materials, Mining, Nuclear, and Petroleum Engineering. This account for 10% of the ...

One’s mindset is the totality of their knowledge, their thoughts and beliefs about themselves and the world they live in. Developing the right mindset is a very important ingredient to success in anything ones does in life. The state of the mind can either lead one to failure or success. One's perception affects how they act and react to information that gets to their mind. There are various types of mindset; they include the fixed mindset, the growth mindset, productive mindset and defensive mindset. Through this essay, I plan to give the reader an insight into my mindset ...

When I look globally, the crucial role of discrete branches of Engineering in the modern World inspires me to be a part of the stream. The applications range from designing the vehicles, the construction of buildings to space travel. The groups of smart thinkers and inventors have heavily contributed to the development of various aspects of the modern day life that eases the daily needs with technology derived from engineering skills. The implications of Engineering have inspired every possible sector like medicine, entertainment, commerce, trade, transportation, navigation and much more.
Since a younger age, I gained inclination towards Engineering. ...

(School/University)

Introduction

The emergence of genetically engineered food has become widespread in contemporary times, particularly because of the fact that the human population is constantly growing to the point where the natural production of food proved inadequate. The need to feed the human population with enough food has since stood as the justification of numerous caucuses supporting the production of genetically engineered food. At the same time, genetically modified food has become the center of dispute by groups opposing it for reasons such as its allegedly unhealthy effects and unethical ways of producing it, among many others. This study aims ...

Utopian technology uses civil engineering, sociology and modern psychology to generate a design. In essence, it is a system of civilization whereby technology is used to solve burdens that may oppress a citizen. According to utopian perspective, technology and science provide an adequate solution to a stable society. Furthermore, utopian view relies on the use of technology as the means of achieving perfect society. However, utopian experiments have failed because of lack of real solving mechanisms.
On the other hand, technological dystopia creates an imperfect society. In essence, it is the opposite of technological utopian. First, dystopian technology can ...

ASSIGNMENT 1 – THE PYRAMIDS OF GIZA

‘Instructor’s Name’
‘Subject’
The Great Pyramids of Giza are a symbol of the magnificent construction techniques of the Ancient Egyptians. Centuries have passed, still the mystery behind how these grand monuments, which have stood tall through the test of time witnessing rise and fall of multitude of civilizations, were constructed. It is the last remaining testimony of a glorious era, and a symbol of the splendor of human engineering skills. The sheer size of the pyramids rivals any contemporary building, built using modern technology and equipments. They were constructed sometime in 2547-2524 B.C, and for a whopping 3, ...