Computers Reports Samples For Students

Introduction

In 1852, Francis Guthrie was discussing with his brother Frederick the coloring of a map. He discovered the fact that he could color the map of England counties with the use of only four colors. He used the colors in such a way that each division had a single color and two segments sharing a common boundary had different colors. Thus, the four color problem was born and the question arose whether in a plane map, four colors were sufficient to denote the divisions of adjacent regions sharing the same boundary, without using the same colors.

Early Proofs

A.B. Kempe is Continue reading...

Ergonomics plays an important role towards the contribution of better efficiency at the workplace and even in everyday life. May products are ergonomically safe and contribute towards better efficiency; however, some products may cause hindrance towards attaining efficiency because of their poor design. Most of the times, people are unable to identify the cause of decreased efficiency; therefore, ergonomics is a science that is employed commonly at the workplace. A very basic example of an ergonomic product would be a desk chair. It is important to recognize that one chair may not be the ideal chair for every person. Continue reading...

Abstract

The assessment of respiratory functions is mandatory in the diagnosis of lung diseases and related disorders. These functions are assessed by measuring the lung volumes and capacities. In the present experiment, we learnt the use and operation of BIOPAC airflow transducer for measuring the lung volumes. We understood the rationale behind the precautions taken while experimentation. We could successfully correlate the obtained results with the physiological conditions of the subjects of the study.

Experiment on Respiratory Volumes

Respiratory system is a vital system of human physiology. It is involved with the gaseous exchange wherein oxygen is inhaled and carbon dioxide is exhaled from Continue reading...

Change is only realized whenever modifications to a given system are implemented. This may be in line with a new innovation, new ideas or techniques of handling a given task. Adoption of these notions calls for hard work, dedication, trial and also error. People tend to resist change mainly because of the communication channels embraced, management policies, and the concept behind the innovative process. Change executors can carry improvement for the client by inspecting their preconceived thoughts about the way things ought to be carried out. Personnel must be open to change themselves; they must have the capacity to Continue reading...

- Educational Purposes
Rubik’s cube has a magnificent shape that makes it possible to view its six sides in a simple rotation. It is very simple to use, just like a dice. The cube has different colors that make it interesting to use by students. In the field of Education, this cube serves various objectives. On e of such objectives was to establish the risk factors of school leaving. It was also meant to enhance reflection, ease class discussions and find solutions. Lastly, it was meant catch the students’ attention and help them share ideas (Rose, 2010).

Rubik’s Cube in Primary Schools

The Continue reading...

- Educational Purposes
Rubik’s cube has a magnificent shape that makes it possible to view its six sides in a simple rotation. It is very simple to use, just like a dice. The cube has different colors that make it interesting to use by students. In the field of Education, this cube serves various objectives. On e of such objectives was to establish the risk factors of school leaving. It was also meant to enhance reflection, ease class discussions and find solutions. Lastly, it was meant catch the students’ attention and help them share ideas (Rose, 2010).

Rubik’s Cube in Primary Schools

The Continue reading...

Acronyms and Glossary

OSI – Open System Interconnection
UDP – User Datagram Protocol is one of the important transport layer protocol used for internet that allows computer applications to send messages.

TCP – Transmission Control Protocol is one of another internet communication protocol

DSL – Digital Subscriber Line is a technology that provides an internet access and transmits digital data over the local telephone line.

UTP – unshielded twisted pair widely used for local area networks

Hub – A hub is a device to connect multiple Ethernet devices
RJ45 – A connector standard used for Ethernet connections and telephone cables
Introduction
Lindley Hall is a steel and limestone building and has 5 stories. The client wants to connect approximately 1000 computers in the building. Out of these 1000 computers, 900 Continue reading...

Apple is one of the leading companies in the electronics and technology industry, second only to Microsoft. The company was established in 1976 by Steven Jobs and Steven Wozniak, and incorporated in 1977. Although its first computers failed, it grew gradually following the success of its later products starting from 1980. The company faced stiff competition in 1980s, following the entry of other players such as IBM into the market (Linzmayer, 78). In 1990s, the company experienced considerable challenges, both in the market as well as in its management, which led to Steve Jobs leaving the company. However, following Continue reading...

Intel Pentium 4 Processor

The Intel Pentium 4 processor was introduced in November 2000 with a 1.5GHz. The processor uses Intel NetBurst micro-architecture which characterized by higher clock rates and world-class performance. There are new other innovations designed to ensure that the processor offers the best performance. Intel Pentium 4 processor is designed to offer high performance in varied applications where end users value quality performance of the CPU (Boggs, Darrell, et al.). Some of the new experiences and innovation in this design include the 3D applications and games, multi-media and multi-tasking user environment (Tuck, Nathan, and Tullsen).
There is real time encoding Continue reading...

This is an interview with a management information system (MIS) director. The company that I work for has an IT department that offers information technology services for the entire organization. This interview is about the new application software that was developed by team. The management information system of the organization required an upgrade.

Interviewee name: Mr. John Mark

Organization: J & G export company

- What is the role of MIS director?
“Management Information Systems job is to ensure that the company’s information systems are up and running” this means that he is in charge of all ICT projects and systems.
- What projects Continue reading...

Introduction

Data is normally collected, recorded and analyzed to be presented, published or stored over time. It is targeted to being used in the future for reference purposes or act as the basic, element and foundation of other research studies thereafter. For these reasons, the data collection, presentation and storage methods have revolutionized over the ears as the computer information and technology continues to advance, and many new innovations made each day. In the essay herewith, we present a detailed comparison of the negative binomial regression and the integer valued AR model for the dataset zeger.txt. The process will involve Continue reading...

Introduction

The purpose of this experiment was to determine the speed of sound at room temperature using the microphone connected to a computer. Sound travels at a speed which is comparatively higher than the speed many objects. Consequently, the determination of speed of sound is technically challenging task. Most experiments rely on echo which is a reflection of sound to estimate this speed. The speed of sound at standard atmospheric pressure and temperature of 0º C is 331.5m/s. The experimental value of the speed of sound is expected to be less than the accepted value because low winter temperatures.

Materials and Methods

Materials
Continue reading...

Instructional Technology

Introduction
Training and teaching are both facets of the process of learning. It is challenging to establish the distinction between the two terms, as both lead to creation and installation of something in the person. However, the notable difference is that training instills skills while teaching instills individual knowledge and intellect of the person. These terminologies connect the concepts used in the process of learning. The key essentials of learning incorporate both educational and instructional technologies. Technology is an essential component in the process of learning today, as nearly every institution and procedure of learning incorporates some form of Continue reading...

The aim of the project was to build podcasting system for the sake of emergency alerts capable of being transmitted through the network and compatible with any network device. Its scope was considerably greater as it aimed to provide an alert system which is more efficient and powerful than the present already implemented a system. The system should also cover all those shortcomings that existing alert system inherently possesses. The scope was achieved as the planned objective has been obtained, and an alert system was successfully designed as a thought in the planning stage.
Cost: The cost was actually Continue reading...

The organization we chose to design a training program for computer skills is GASCO Marhaba, which is known as Abu Dhabi Gas Industries Ltd. The company deals with the extraction of natural gas liquid (NGL) from the associated and non-associated gas in Dubai (GASCO, 2014). This company is significant in the growth and development of economic and industrial of the country; thus, this project is essential for the company. Computer skills will assists the workers of this company to manage their records and store critical data. All these management and control of information for the company requires employees who Continue reading...

AMD is a technology company has been recognized as one of the top technology providers in the world. It has its based office in Sunnyvale, California but also have different branches around the globe. It has been living its company motto of “Enabling today. Inspiring tomorrow” by having pioneered the invention of numerous technological advancements since it started its operations in 1969 designing microprocessors (amd.com).
The company pioneered the following recent innovations. The accelerated processing unit (APU) with HSA started with AMD. Microprocessor design has been the major product of the AMD through the years as is still leading Continue reading...

- SWOT Analysis on the viability of upgrading to Windows 8
Windows 8 was released on October 26th 2012 and Microsoft made it increasingly easy for upgrading from previous operating systems including Windows 7, Vista and XP. Having an OS upgrade is termed a major step in staying abreast with the current offerings and solutions. However, the upgrade process requires a plan of execution to mitigate the risks involved in migrating to a new OS. Crescent Manufacturing Inc. is a leader in crafted and customized home furnishings. The company has a corporate headquarters located in Texas and two other Continue reading...

A command line interface refers to a computer operating system user interface or an application that uses visual prompts to execute tasks by typing in a command on a specified line. The graphical user interface, on the other hand, is a human-computer user interface that uses icons, windows, and menus that can be controlled using a mouse or a keyboard to execute commands. Graphical user interfaces (GUIs) are accentuated by Microsoft Windows while command-line interfaces (CLIs) are exemplified by the UNIX command Language. It is less complicated for a beginner to use a GUI than a CLI since a Continue reading...

Section SLN:

TA’s name:
I. Objectives
- Measure the motion of a Simple Pendulum using a motion detector and record position v/s time by computer.
- Investigate how the period varies with the amplitude.
- Analyze the motion to determine damping constant and quality factor.
II. Data

Undamped oscillations – tennis ball

Slope of T2 vs. L plot = 4.923 +/- 0.2372 s2/m

Make a bar graph in GA to observe the relationship between period and amplitude.

Damped oscillations – Styrofoam ball
III. Data Analysis

Period of oscillations as a function of the pendulum length

- Based on the slope of T2 vs. L plot the experimental gravitational acceleration was calculated as follows:
The slope of the graph is calculated to be 4.923.

Now, we know that,

Slope = 42/g

Therefore,

g = 42/slope
- The Continue reading...

Google Inc. is one of the most successful multinational corporations (MNCs) of the world. The revolution of search engine brought by the Google enabled the internet users to get any information at their fingertip with just a mouse click. The other internet related services from Google include cloud computing, Ad Words, technologies related to advertising and software, etc. Google is one of the most powerful search engines that is highly accepted for its organized information and used by people of all ages all over the world. Being a great success in the field of internet, it would be good Continue reading...

For many dictionaries, word “Geek” simply means a person with an obsessive interest in a particular subject or topic. It is a slang term used to denote an uninteresting person. The person is hence, considered as unconventional or non-mainstream having only one interest or hobby. It contains a negative connotation as a “geek” is necessarily an unwanted or dislikable individual particularly, one identified as excessively intellectual. However, there are many other meanings and definitions to this word, which have evolved out with the passage of time. For instance, it also means a human being who is considered as an Continue reading...

Day in, day out, new advancements are being made in the world of physics, and it is becoming increasingly difficult to keep track of all of them. While one reads them every now and then in the newspapers, there is not a single record of the significant achievements made in a single year. Given the change in lifestyle that has occurred in the past two decades, advancements have been made a foregone conclusion in leaps and bounds every year. In order to solve this predicament of keeping track of the most important progressions, Hamish Johnston in his article “Cosmic Continue reading...

1. Explain how the Internet has aided criminal activity.
Internet crime is any crime or ill-gotten on-line activity committed on the web, through the web or exploitation the web. The widespread web crime development encompasses multiple world levels of legislation and oversight. within the difficult and ceaselessly ever-changing IT field, security consultants ar committed to combating web crime through preventative technologies, like intrusion detection networks and packet sniffers. Internet crime could be a sturdy branch of law-breaking. fraud, web scams and cyberstalking ar the first varieties of web crime. as a result of web crimes sometimes have interaction folks Continue reading...

Demand refers to the quantity of a commodity a consumer is willing to purchase under different conditions. The demand for a commodity depends on a number of factors like the price of the commodity, income of the consumer, the price of substitute commodities, the price of complements, the preference for the good by the consumers, fashion trends, seasonality, and such others. Therefore, the demand function can be written as:
QD = F(P, Y, PS, PC, T, O)

Where, QD: Quantity demanded

P: Price of the commodity
PS: Price of the Substitute commodity
PC: Price of the complementary commodity
T: Consumers’ tastes and preferences
Continue reading...

Introduction

Malware is a short term for malicious software. It is a term used to refer to any software that disrupts normal computer operation, gathers information and accesses private material without the consent of the owner. As such, the term malware can be used to refer to a number of unwanted software such as viruses, phishing software (spyware), adware, worms, and Trojans. Malware can manifest itself as active content and scripts on websites, executable code (.exe files) and other forms (Bergman, Stanfield, Rouse & Scambray, 2013). Malware can be harmful and annoying. Harmful malware is that which can leak sensitive information Continue reading...

Enterprise Application Integration (EAI) and its Features

Enterprise Application Integration (EAI) refers to the seamless incorporation of two or more enterprise computer applications to enable them operate as a single system using a combination of software, hardware, processes and standards (Goldstone Technologies Limited, n.d.). It facilitates the creation of a dynamic business environment by permitting organizations to integrate their business processes both internally, and externally with their partners. EAI developed in response to the progression in distributed computing and the emergence of open information systems. There are three models of integration of applications: presentation, data and functional integration (Kalyani, 2012). In these models, new software in Continue reading...

Abstract

The topic of wireless Security issues in pervasive computing is a very dynamic area given that the technology keeps on changing. The change in technology comes with different challenges especially when it comes to integration of two or more technologies to satisfy human needs in life. Pervasive computing(PC), for instance, can represent an entry point for many of attacks.It can compromise users’ data, crash the complete system, render services unavailable, and possibly result to the loss of property and even lives. This paper examines and reports various security concerns in wireless security within the context of PC. The Continue reading...

Report

Report:
Abstract:
The report below examines an inverted pendulum experiment. In the report a brief description of the system used has been provided. The aims of the experiment have also been discussed. A block diagram of the equipment used in the experiment has also been included in the report. Matlab has been used to plot the data derived from the experiment and using this graphs the behavior of the inverted pendulum has been discussed.

A QNET rotary inverted kit was used in the experiment. The kit is shown in the figure 1 below. The kit used in the experiment Continue reading...

- Abstract
- Construction is an essential factor in the progress of the human civilization. It is in the construction industry that our infrastructure depends upon. The construction life cycle has several phases in it, one of these phases is the design phase. Before the advancement in computing technology - the invention of modern computers - construction engineers do manual designs; that is, through pencil and paper. This method of designing has become unfit as larger more complicated infrastructures and engineering designs develop. Hence, the need for a tool that will help construction engineers in the design phase. On Continue reading...

(Author’s Full Name)
(Institution Name)

Introduction to GIS

Geographical Information Systems (GIS) is an emerging industry throughout the world. It is a tool that allows users to visualize and present data in several ways. This enables them to observe and report patterns and relationships within a given area, subject or between given variables. These patterns and relationships are generally displayed on maps, but they can also be represented on a globe, on charts and in reports. Its importance lies in its ability to bring together information from a number of different sources and ensure that specific work is carried out. Latitudes Continue reading...

Effective training programs are developed in accordance to the needs of the target groups. A training plan will offer the guide on the way the users will be trained on the operation of the health information system. The plan will outline the procedures that will take place during the process. It is important to carry out the training to the users so that they can interact with the newly implemented system with ease. The training aims at identifying the weaknesses associated with the operation of the system and giving the users the confidence and courage to work confidently with Continue reading...

The company is well known as Apple computer that engulfed the computer market for a long period making very strong moves and became the strongest company dealing with computers and the related. It was best known for its Macintosh personal computers and it enabled the company to thrive in the market. Despite the good profits that the organization had made prior to the 1980s, at this period the company was coming down at an alarming rate that is after the dismissal of the Jobs from being the CEO of the company. It made serious loses that enabled its competitors Continue reading...

Organization Assessment Report

Organization Assessment Report
Apple Inc. is probably the most known company in the manufacture of technological products; it has a cutting edge and produces something that everybody desires to have in their possession. The company incorporated in 1976 was founded by Steven Paul Jobs, Steve Wozniak and Ronald Gerald Wayne on April 1, 1976. The company’s headquarters is in Cupertino, California. The company originally started at the bottom of a garage as opposed to an expensive business location as many would think. It is this historical background of the company that amazes people in terms of their brands Continue reading...

Project Title/ Home Automation System/

B. Eng Electronics Engineering
Southampton Solent University
B. Eng (Hons) Electronic Engineering

Project Title: Home Automation Systems

The automation plays a vital role in saving human effect and providing accuracy in its operation. Automation can be done in many ways; it’s a real challenge to choose a most suitable system for a particular application. The Raspberry Pi and Z wave technology used in the home automation system helps to save energy, time and ensures security of the home.
- Detail Specifications
In this project we are going to use raspberry pi board, Z- wave card, Z- wave appliance plugs/switches/thermostat/sensor/remote control and mobile application. Continue reading...

- Purpose
Linux has different versions that are free to distribute and use. The liberty accorded to the distribution of Linux operating system has created a situation where the users have developed their own versions of the operating system. It is this public access and modification that is referred to as distributions.
Linux distributions are made for various purposes and are tailored to solve and address several issues and problems. Some Linux distributions were developed to be used in network servers that receive heavy traffic this include web servers. Others were developed to be used by networks that require Continue reading...

The physical locations

Physical location is very important due to IT security needed by the hospital. Computer systems and the network must be protected at the physical level to avoid the sophisticated features that can harm their existence. Being the heart of the physical network the server room consists of the servers, cables, routers, switches and other key devices that can disadvantage the operations in the hospital if accessed by intruders. The hospital decided to choose a more secure physical location for the workstations and the servers. Good locks and electric fence will shun away third parties who may invade the workstation Continue reading...

Abstract

Rapid prototyping describes techniques that designers employ in order to fabricate models of a physical product using computer aided design in three dimensions. . Rapid prototyping allows the designer to bind one layer of material to another layer using computer aided design on three dimensional frame. This report describes rapid prototyping techniques as applied in a case study. The report will pay attention to the prototyping technology used, the materials used in producing a prototype and the accuracy of the models that are produced using the rapid prototyping technology in question. One of the most prominent of these techniques is Continue reading...

Gladys is a business lady who specializes in offering computer services such as typing and printing of thesis, scanning and other computer related services. In having a conversation with her, she seemed to have a lot of complaints regarding the inefficiency of computers and other hardware devices she uses to accomplish her work. She added by saying that of late, even her previous customers tend to divert to her competitors after realizing the persistent queue of customers at her business place who continues to complain of slow service delivery.

Process used to elicit information

In order to solve this problem, I decided to obtain Continue reading...

I-V Characteristics

Organization
Abstract
The experiment aims to provide an insight into the I-V characteristics of some two terminal electronic components in which the components will be setup in a circuit through which voltage will be passed and the resultant current will be measured and recorded. The different components will be found to behave differently under changing voltage and their behavior. The graphs of voltage versus current will be plotted for different components using computer software. The experiment will also allow an opportunity to gain experience in collecting data through computer and setting up simple circuits which can serve as a Continue reading...

Analyzing the Situation

Is the problem serious?
The problem is serious because some technicians are spending excessive time on troubleshooting to get the exact problem.
Do other members of the group think so?
Yes, other technicians also believe they are taking excessively long on troubleshooting.
Would the reader think so?
The reader would also think that technicians are taking long on troubleshooting, which reduces their effectiveness.
What caused the situation?
The situation is caused by unclear understanding of computer systems and networks and/or failure to follow recommended troubleshooting procedures because they do not know the procedures or because they think these procedures Continue reading...