Accuracy Reports Samples For Students

Abstract

This experiment sort to find an accurate and most viable method that would be used in laboratories to the measurement of iron concentration in aqueous samples. The methodologies that were identified for further analysis included; colorimetric assay (molecular spectroscopy), flame atomic absorption spectroscopy, redox titration (volumetric) and cation exchange chromatography (EMA technique). These methods were analyzed of their advantages and later subjected to a validation test. In the process, a wide range of CRMs were used alongside six other samples that contained unknown iron concentration.

The experiment was thus, geared towards providing answers to statements like; the necessity of quantification of ...

Final Report

Our goal is to design a system that would be used to measure the temperature by changing resistances. The system would work in a solid medium but we would also try to make it functional in liquid mediums such as oil, fuels and such other liquids. This instrument should be able to measure the temperature of the liquids from -259.15 °C to 400 °C and we should have a resolution of ±0.018 V.

Instrument Details

The RTD is made of platinum coated nickel and should be attachable to the oil tank. i.e, it should be resistant to vibration, high pressure, oil and heat (e.g. ...

Report No:

Training completed in the week
Printing and Handling of cards
This week I have learnt about printing and handling cards in the cards centre of the bank. I have learnt that the forms from customers for printing cards can come from 3 places, which include

Forms created from the customers from different branches

Forms created from Section 1 , i.e., from Customer Services from the same branch
At the end of the working day, the employees ensure proper counting of the cards. They count the number of cards that are applied and cards that are printed, and they should be equal to the cards in inventory. I also ...

Introduction

Steroids play a central role in enhancing human growth, development and normal health, since they take part in development of secondary sexual traits, reproduction, gene expression, neurological and cardiovascular functions and maturation among others. Accordingly, imbalances in the metabolic mechanisms of steroids in humans is associated with an array of health complications such as cardiovascular and neurodegenerative diseases and cancer among others. The foregoing underscores the importance of steroid profiling to establish its levels in humans, particularly in disease diagnosis, because it enables health professionals to understand a variety of steroid-related health conditions. For efficiency and accuracy, a good profiling method is ...

Abstract

A 'mirror-tracing task' (or mirror-tracing test) is a psychological test used to measure a variety of functions such as learning, transfer of information from one brain hemisphere to the other, and other perceptual/motor skills. In the test, two hypotheses were formulated in a bid to understand the concept of spatial perception, transfer of abilities and gender differences. On the first hypothesis, Continuous exposure to the mirror-tracing test will lead to improved mirror tracing skill; we needed to look at the influence of practising on the mirror tracing skill. 243 subjects were continuously exposed to the test for seven days and the results ...

Summary

This experiment is about the static calibration of a differential pressure transducer. Test measurements are done to find the range of input and output of the transducer, and to determine the “best-fit” line that models how the voltage reading would equate to the real pressure measurement. The input pressure comes from a hydraulic ram with pressure gauge. The output of the differential pressure transducer is in voltage, and is measured by a digital voltmeter. The input pressure is varied from 0 to 6 bar, and the three voltage readings are recorded for each pressure step value.

Introduction

The differential pressure ...

Abstract

Rapid prototyping describes techniques that designers employ in order to fabricate models of a physical product using computer aided design in three dimensions. . Rapid prototyping allows the designer to bind one layer of material to another layer using computer aided design on three dimensional frame. This report describes rapid prototyping techniques as applied in a case study. The report will pay attention to the prototyping technology used, the materials used in producing a prototype and the accuracy of the models that are produced using the rapid prototyping technology in question. One of the most prominent of these techniques is stereolithography. Since the ...

a Course, College, country
b Course, College, country

Abstract

Tensile strength is a kind of force which is applied by pulling something such as rope, wire etc. to the point where it breaks [1]. The tensile strength of the material is the maximum amount of tensile stress that it can take before failure [1]. There is different kind of tensile strength yield strength, ultimate strength, breaking strength. The tensile strength can be found using tensile test which is a kind of the mechanical test [2]. Tensile test are simple, inexpensive and fully standardized. The motto of this paper is to analyze the tensile ...

Introduction

With the evolving technology around the globe, security systems have continued to experience rapid improvements. This has been facilitated by increased sophistication of hardware and software products. Industries have benefited greatly from these improvements especially in terms of security. One of the major innovations that have arisen from these sophistications has been the integration of radar systems in security systems. The RADEC-M automatic door sensors have proved to be a success in this field. This paper provides an analysis of the RADEC-M sensors with focus on their functionalities and how they have revolutionized the security systems. These sensors are used ...

Introduction

Accurate and precise measurements are of uttermost importance to chemists everywhere. A measurement is said to be accurate when it is very close to the accepted value. A precise measurement is one in which repeated measures yields values or figures that are very close to one another. However, not all measuring instruments have an equal ability to give accurate and precise measurements. In any given experiment, the techniques and the equipment used to collect data should essentially be of the same precision. In the course of an experiment, there are bound to be less precise measurements and it these ...

Introduction

The purpose of this experiment is to assist one to learn how different equipment in the laboratory is being use when carrying out the experiment. It tests the level of accuracy required when using different apparatus for measuring the volume. For very approximate result of volume, a beaker or conical flask is preferred when measuring volumes of liquids.

Accurate methods of measurement

This is done by the use of burette, conical flask and pipette. These measuring apparatus are discussed below.
When a much more accurate measurement is required, always measuring cylinders are preferred Measuring cylinders, which are much more accurate than beakers and conical.

Also volumetric pipettes and volumetric flask the mostly used apparatus used when measuring accurate volume.

...

Introduction & Purpose

Typing is one of the essential skills that a white-collar or even a blue-collar employee should learn (David 2-5). An aerospace firm situated at the heart of Seattle, Washington is concerned about the keyboard typing skills of it’s over 2000 white-collar employees. Most of the tasks involved in the company require the use of a computer and other gadgets that utilizes a QWERTY pad. Mr. Underwood, the firm’s personnel manager, together with the director of training is planning to conduct a company-wide training program so that aims to enhance their slow and poor keyboard-typing skills.

In order to make the process of ...

Part A - The impact of accounting on the IT Development 4

Part B – Question 1 - Introducing or Upgrading Computerized Accounting Systems 5
(a) Advantages and Disadvantages of using a Computer Accounting System 5

Advantages 5

Disadvantages 5
(b) Considerations when setting up a Computerized Accounting System 6

Completion of an Accounting Cycle 6

Recording all Transactions from Manual Trial Balance 7
Running a Trial or Testing Phase 7
Verification of the Computerized Accounting System 7
(c) Chart of Accounts and Coding Structure is Followed by Impetus Limited 8

Part B – Question 2 - Accounting Packages 8

(a) The Features of an Accounting Package 8

Security 8

Reporting 9
Interdepartmental Operations 10
(b) ‘Module’ in an Accounting Package and its Purpose 10
(c) ‘Integrated’, ‘Semi-Integrated’ and ‘Non-Integrated’ Modules ...

I.0 Introduction
The Farm Bank, just like any other organization must enhance its capabilities to be able to cope with the growing demands of the banking institution. While the top management came up with the right decision in adopting a new Management Information System (MIS), our analysis revealed that the managers should have made the decision after taking every aspect related to the new MIS (Ahmed and Omotunde, 2012) This is especially so in the banking industry where there are complex processes involved in the collection, analysis, summarization and presentation of valuable information that are needed for decision making. ...

Improve Bus Tracking System

Improve Bus Tracking System
The objective of this given memo is to describe the purpose of employing a tracking system in transportation to avoid sector to avoid passengers getting stranded in bus stops, get cold in ice winter-stricken station lobbies without hopes of boarding a bus in the next free minutes. The attached is the methods that prove the effectiveness of an improved bus tracking system – the global positioning system (GPS) service.
The methods for testing the service are discussed as well. How an improved bus tracking system, modern technology enables passengers to track their bus and know their ...

Objective

Main objectives of this lab are:
learn and practice to use a graduated cylinder, pipet, and buret for volume measurements;
determine average volume of a water drop using volumetric ware;
find the density of liquid and a solid using mass and volume measurements.

Hypothesis

Average percent difference indicates volumetric ware’ accuracy and precision. In this lab pipet out of all volumetric ware will have the highest accuracy and precision and, therefore, lowest average percent difference.

Materials

In this lab, the following materials were used:
graduated cylinders;
beakers;
burets;
plastic droppers;
pipets;
rubber stoppers;
unknown liquids.

Procedure

The graduated cylinder
The graduated cylinder ...

COMPARISON OF ISOTONIC ANF ISOMETRIC STRENGTH TESTING

Methods: 10 males and 3 females in the age range of 21 to 32 years were tested for hand grip strength. Their height ranged from 65 to 74 inches and weight ranged from 158 to 260 pounds. The BMI range of the subjects was from 21.9 to 38.3 Hand-grip measurements and bench press tests were perfomed on these subjects. The Average 1 RM hand-grip, Average Handgrip, Arm Strength were estimated for each subject. Combined scores from the isometric tests -Arm plus Shoulder, ∑ of 4 isometric tests, Isometric minus handgrip were also estimated.
Results: Linear regression and the R-squared ...

Report

Report:
Abstract:
The report below examines an inverted pendulum experiment. In the report a brief description of the system used has been provided. The aims of the experiment have also been discussed. A block diagram of the equipment used in the experiment has also been included in the report. Matlab has been used to plot the data derived from the experiment and using this graphs the behavior of the inverted pendulum has been discussed.

A QNET rotary inverted kit was used in the experiment. The kit is shown in the figure 1 below. The kit used in the ...

Introduction

Contemporary business environment places a lot of pressure on the costs, which the companies encounter to deliver the product or service to their final customer. The reality shows that in the majority of cases the major cost is attributed to the Supply Chain Management (SCM) operations, such as procurement, manufacturing and distribution. The impact of these costs on the profitability of the product is paramount, and the issue is especially sensitive when it comes to low margin products. With that in mind, management of operations and continuous improvement mentality is critical for the success of the companies (Peng 2014). This ...

Report: Recommendation for Adoption of Lean Sigma 6 Technology

Vodafone Group Plc.Vodafone HouseNewbury, BerkshireRG14 2FNEngland
Dear Sir,
I am pleased to present a report on adoption of Lean Six Sigma by the company pursuant to the study that showed necessity of such a system.
The report is prepared pursuant to the company’s articles of association and goals to be the leader in technology and adoption of efficiency systems. This includes the efficiency and saving systems that will enhance the efficiency of the organization in the ever-competitive environment.
The report also includes the reasons why it is the best system for the company and how it ...

Test Retest reliability of the ABL and Acusport in measuring resting

Exercise Bioenergetics

Resting and exercise blood lactate concentrations were measured in order to Test Retest the reliability of two measuring devices, the ABL and the Acusport. The purpose of the test was to prove the reliability of the results. The t-test and the Pearson’s product Correlation Coefficient were used in order to evaluate the experimental results. The t-test and the Peason’s product Correlation Coefficient calculations proved that the experimental test results from the trials of the ABL and Acusport measuring devices are reliable. The results will be reproducible if the experiments are done again.

Introduction

High quality evidence ...

Abstract

The Data Quality Management Model (DQMM) is a model created to manage the quality of data (Wang, 2001). It is comprised of four tools, namely: application, collection, warehousing, and analysis. Application refers to the purpose for the data gathering. Collection refers to the accumulation of data elements (Wang, 2001). On the other hand, warehousing refers to the systems and processes applied to store data and journals, whereas analysis deals with translation of data into information (Wang, 2001). To test the various aspects of data quality, the four testing tools must be used. The DQMM deals with aspects of data quality ...

Project 2

This paper compiles a report on an interview that was conducted on an ICT (Information and communications technology) manager who was concerned with service management in a firm. The firm was Oracle Corporation and the manager was in charge of service administration in Redwood, California branch. The company is a multinational and focuses on building tools for database improvement and software application. Some of the notable products of the company include: Oracle software such as Oracle SQL developer, Oracle fusion middleware, databases such as TimesTen and many more (DATAMONITOR, 2011). Therefore, the interview entailed the management style the manager used at the ...

Introduction

Development is crucial for any aspect of growth in life. Organizations of different kinds in different parts of the world strive for development because this is what determines the period within which they accomplish their long term and short term note. Development is therefore viewed as a positive aspect of life and this is the reason why even at the individual level, personal development is considered to be very important. There are different ways in which development at the individual level might occur. This is in relation to the interest of the individual in life or the activities or interests ...

Abstract

The aim of the experiment is to plot the calibration curve for deteremination of antigen 4D5 by performing ELISA experiment. The primary antibody was blocked by bovine serum albumin, then it reacted with IgG (secondary antibody). Then, the system was washed with carbonate, blocking and substrate buffers. Three replicate experiments were performed, and the experiment was performed with the serial dilutions. By measuring the optical density of the diluted solutions, the calibration line was obtained and the region with the linear dependence “concentration – optical density” was determined. The callibaraion line can be used for the practical tasks: for detecting ...

Introduction

The ability to concurrently develop a product and its supply chain is a major competence in manufacturing industries. When the tow activities get undertaken efficiently at the same time, massive returns are bound to get derived. Proper design ensures that goods produced have the highest quality possible. High quality guarantees customer satisfaction and improves the brand name and legacy. Suitable supply chains, on the other hand, ensure that goods and services reach the customers on time. They also provide that the cost of supply is greatly diminished and saves the company revenue.
However, in the auto-manufacturing industry, this ability ...

Report on sales forecasts

Problem description
The company experiences a problem of great variability in sales as well as promotion and advertising expenditures from quarter to quarter. This makes it difficult to determine a sales forecast and prepare a budget for promotion and advertising expenditures.

Developing a multiple regression model

A multiple regression model can be used to determine the sales forecast given the values of the independent variables. In this case, sales of meatloaf mix is the dependent variable while the independent variables are promotion expenditure, advertising spending and economic index.

Description of the data

The data used in developing the model are historical data on each of the variables. They ...

Abstract

Systematic observation is a deeper and more analytical form of observation with the gathering and utilization of data or information. It is a quantitative research or observation of specific behaviors in a specific setting. As an example, this paper discusses the conduct of a systematic observation on a 10 year old child who is asked to play alone, with kids with the same age, with older kids, and then with adults. The researcher then observes the child’s behavior in all four settings or conditions to determine the differences in each setting. The research subject’s behavior is not ...

1. The average values of hi, hf, y, and X were found to be:
hi = 5 cm
hf = 15.87 cm
y = 104.84 cm
X = 310.235 cm
2. h = 15.87 – 5 = 10.87 cm
3. Using equation (10) to determine the initial velocity and equation (11) to determine initial momentum, we find
vi = 3.10235*sqrt(9.81/2*1.0484) = 7.035 m/s
pi = 0.06944*7.035 = 0.4885 kg m/s
4. Using equation (7) to calculate the final momentum of the system, we find
pf = (M + m)*sqrt(2*g*h)
pf = 0.3321*sqrt(2* ...

Objectives

The aim of this experiment is to study the effective thermal conductivity of a heat pipe. This is achieved by measuring the difference in temperature across the heat pipe and another conductor made of the same material and size. The temperature measurement for both the pipe and conductor is done under identical thermal conditions.

Apparatus

- Copper-water heat pipe – The specimen whose thermal conductivity is to be found. It is represented in Figure 1.
- Solid Copper Wire – The reference material of same size.
- Thermocouple (quantity – 3) – Temperature measuring instrument (analogue).
- Multi-channel digital thermometer – Temperature measuring ...

LASER is an acronym for Light Amplification by Stimulated Emission of Radiation. Laser is a powerful source of light with properties that are not found in normal light sources. Laser sensors offer long ranges of detections and high resolutions. They are good at accuracy, speed and reliability. They work at temperatures irrespective of variations. Lasers occur in various mediums such as solid, liquid, gas and semiconductor.
Laser is an electronic diode that converts an energy source into a thin and concentrated beam of light, which is used to detect very small objects or to reach very high distances. The laser ...

What GPS is

As it often happens with high-tech projects, initiators of development and implementation of GPS (Global Positioning System) were the military. Project of satellite network for determining the coordinates in real time-mode and in any spot on the Earth was named NAVSTAR (Navigation signal timing and ranging), whereas the abbreviation GPS appeared later when the system was used not only for the purposes of defence, but also for civilian purposes (Howell). Today, GPS “provides accurate, continuous, world-wide, three-dimensional position and velocity information to users with the appropriate receiving equipment” (Kaplan, 3).

Short history of GPS

First steps of deploying navigation network were undertaken in ...

Business Plan[Name of the Student]

Introduction 4

1. Overview 4
2. Trend 4
3. Size and Potential 5
5. Competition 6
6. Customers 6
7. Analytical Tool 7

Market Strategy 8

1. Objective 8
2. 4Ps 8

Organization Management 9

1. Management Overview 9
2. Staff Requirement 9

Production and Operation 10

1. Premise 10
2. Plant and Equipment 10
3. Operation Overview 11

Costing and Financing 11

Financial Assumption 11
Executive Summary
In the present world, it is not easy to launch and run a business, even if it is business related to manufacturing. It requires constant tenacity, hard work, and continuity to work with various uncertainties. ...

Introduction

An acid that gives two hydrogen ions for every acid molecule is known as diprotic acid. Examples of such acids are sulfuric acid (H2SO4), hydrogen sulfide (H2S), oxalic acid (H2C2O4), chromic acid (H2CrO4) and carbonic acid (H2CO3). Dissociation of a diprotic acid in water takes place in two stages. In the first stage, the diprotic acid dissociates to give one hydrogen ion and a monoprotic form of the acid.
H2X(aq) H+(aq) + HX-(aq)
The second stage involves the dissociation of the monoprotic form of the acid to give the second hydrogen ion and fully dissociated form of ...

Electrical Engineering and Environmental Engineering

Introduction
Purpose
The purpose of this report is to recommend that best way to save energy used for lighting by evaluating the best time to turn off a light based on the type of lighting used.

Problem

Energy costs are important to lower in order to save on the family budget as well as to decrease the amount of pollution entering the environment. Turning of the lights when a room is not in use has always been a good way of saving energy when incandescent lighting was in general use. A variety of lighting designs are available in contemporary times. Those ...

TORSION LABORATORY

Objective
The objective of this experiment was to determine the relationship between load and angular deflection of a mild steel bar, the maximum shear stress applied to the bar and its modulus of rigidity.

Apparatus

- Torsion test rig
- Weight hangers
- Masses
- Rule
- Calipers

Procedure

- A distance L was set between two angle indicators. Then the fixings were tightened to make sure that it was not moving. The indicators were set to zero on both the scales.
- The effective radius of the pulley and the diameter of the steel shaft ...

Management

Management

Introduction

This report seeks to evaluate lean systems, inventory management, aggregate production planning and master scheduling and recommend the best philosophy to be adopted by Unico Plant.

Lean system, which is also known as Just in Time (JIT) system refers to a system that seeks to purchase or produce components or products when they are required for use or by customers and not for stock. Lean system is a pull system that responds to consumer or internal demand. Therefore, lean systems can be applied in both production and purchasing. Lean systems seeks to eliminate non-value adding activities, keep zero inventory, have ...

Abstract

Lathes are being used since a long period of time and tooling and designing method, and the purposes for which it has been used most of the times are drilling and boring holes that are usually conical or cylindrical in shape. The manual lathe usage primarily depends upon the machinist and the experience in the designing field. With time there has been a major improvement in the efficiency and quality of part development, which is a result of numerical control into the process of tool designing and the use of lathe. The most advanced and the latest technique in this area is ...

Lathes are being used since a long period of time and tooling and designing method, and the purposes for which it has been used most of the times are drilling and boring holes that are usually conical or cylindrical in shape. The manual lathe usage primarily depends upon the machinist and the experience in the designing field. With time there has been a major improvement in the efficiency and quality of part development, which is a result of numerical control into the process of tool designing and the use of lathe. The most advanced and the latest technique in this area is ...

On-line social networking sites (OSNs) gained a great popularity over the last few years. And their popularity continues to increase. As of 2008, over 700 million worldwide were registered on the most popular social networks – Facebook and MySpace. Irrespective the vital role of the social networking in people’s everyday life no studies were conducted to investigate one of the crucial issues of the OSN concept: does the profile information shows accurate data on his/her personality?

There are two main contradictive hypotheses in this respect. The first is called idealized virtual-identity hypothesis. According to it owners of the profiles show ...

Lab Report

Introduction
The piezoelectricity concept was first used approximately 80 years ago. For the piezo effect to apply, quartz is essential. When pressure is applied to quartz electrical fields and electrical charges result. This was found to be very essential as it lead to a wide range of applications. A scientist by the name Langevin was the first to find a suitable application for the technology. Langevin, a Frenchman used quartz in an ingenious way to develop the first ever sonar. He was able to send and receive sound under water. The present day technology borrowed a lot from this ...

Research Question

The effect of increasing the concentration of two reactants, i.e. Calcium Chloride solution and Sodium Carbonate solution, on the percentage yield of Calcium Carbonate is to be studied in this experiment. The efficiency analysis for the production of Calcium Carbonate (also known as chalk) is to be carried out.
The dependent variable in this experiment is the percentage yield of Calcium Carbonate, expressed as percentage (%). The independent variable is the concentration of the reactants, i.e. Calcium Chloride solution and Sodium Carbonate solution. The concentrations are expressed in moles/liter or moles/dm3. While the control variable is the mass of the ...

Introduction

The term ‘social robot’ has become popular in the modern world and is almost being integrated into the modern day cultural constructs as usual. Lamers & Verbeek (2010) maintain that social technology is meant to invoke emotional attributes and to engage the human mind in a way that exceeds what is physical. Lamers & Verbeek (2010) argue that a robot is man’s effort at recreating his own self and it is with this semblance that the conceptualization of human-robot interaction has been captured. Dating back from the 18th century, inventors and scientists alike have been making numerous attempts at making ...

REPORT

Report

The research aims at analyzing PMIBoK5 to identify the topic coverage for P3M, entailing the areas concerned with P3M, and to identify the influences in PMIBoK5 affecting the approaches as well as the methodologies of P3 Management in the diverse project environments.

Deliverables

Project Management Institute Body of Knowledge (PMIBoK) entails a term describing the totality of knowledge within project management as a profession. The areas of coverage concerned with the P3 management include the project scope management, project quality management, project cost management, project risk management, project stakeholder management, project procurement (Haimes 2015, p. 41).

Related Scope Factors to P3 Management

Project scope management. ...

Management: Performance Appraisals

Introduction
Performance appraisal is a tricky process that demands the Rater to be objective and tactful in judgment. The Performance Appraisal Process in Coca-Cola gives the employees a chance to grow their careers and the company as well. The senior management is meticulous in how they handle the process. The report in this paper summarizes the process in four strategies that include, improving appraisal formats, selecting the right Raters, understanding how raters process information and training raters to rate more accurately.

The performance appraisal policy of Coca-Cola Company, the company I would like to work for after graduation, provides ...

MANAGEMENT ACCOUNTING

Standard Costs Used for Variance Analysis and Favourable/Unfavourable Terminologies with Suitable Examples 8

References 11

Management Accounting
Differences between Management Accounting and Financial Accounting and the need for Investing in the latest Accounting Software
Audience Served
The basic difference between these two accounting fields is that the management accounting is concerned with providing information to internal stakeholders of an organisation such as the senior management, supervisors and employees. In contrast, financial accounting provides information about the financial health of the business to external stakeholders such as potential investors, shareholders (in case of a publicly traded company), tax authorities, lending institutions and ...

Software testing is defined as the process of executing software to determine its functionality. The goal is to demonstrate to the developers as well as the users that the software meets the technical and business requirements (Homè̀s, 2012). Standards on the other hands are documents outlining guidelines, specifications, characteristics, or requirements to ensure that products are consistent and meet their purpose. There are national and international standards that guide the development and testing processes for software. In Australia, the AS/NZS ISO/IEC 25062:2006 is a standard that provides User Interface (UI) designers or software usability professionals procedures for testing ...

SORTING ALGORITHMS

INTRODUCTION
Two sorting algorithms are studied in this paper: bubble sort and quicksort. Bubble sort is a comparison-type algorithm. It compares the elements of the array two at a time. It starts comparing from left to right of the array elements. The element with the greater value is placed on the right, and then compared to the next element. This is done until the largest element is placed at the end of the array. At this point, the largest sorted element is considered sorted, while the rest of the elements are unsorted. The algorithm is repeated for the remaining ...

Application of the Engineering Ethics Principle

Though it is true that engineering requires skills in order to accomplish certain projects or tasks, the skills and expertise in the field are not justifiable enough for one to determine the success of the project. This is because engineers do not only act out of their own accord and total freedom in whatever they want to do; instead, they follow certain ethical standards in order to make sure that the welfare and the benefit of most, if not all people are being prioritized. The incorporation of ethics in the field of engineering gives way to make the field ...

Section

Introduction
The purpose of this lab was to find the amount and percentage of nickel present in an unknown compound using the "mole method." The unknown nickel compound was dissolved in water and treated with dimethylglyoxime and ammonia solutions to obtain the precipitate of known chemical composition (bis(dimethylglyoximo)nickel(II)), which then was weighed and using this data the amount and percentage of nickel in the initial compound were found. The insoluble Ni(DMG)2 complex is formed in two steps. First, the dimethylglyoxime reacts with hydroxide ion formed through the ammonia hydrolysis to produce dimethylglyoximate anion:
C4H8N2O2( ...

Executive Summary

Risk management is the core function required to address the impending possibilities of a global financial crunch that might occur due to higher volatility in financial and commodity markets. Financial risks like Credit risk, Foreign Exchange risk, Interest Rate risk, etc. are of a prime importance as they result in the direct downswing of the involved business markets in the respective economies. Organizations have developed specific enterprise level risk management frameworks to encounter the business and market risk related contingencies. Financial risk models have already been defined by the BASEL committees in segment like those of expansion strategy, capital ...

Introduction

Fuel level sensors and gauges are imperative in measuring the correct level of fuel while filling fuel in most automotive. It is significant ton know the amount of fuel present in the fuel tank for various reasons. The current fuel level sensors are fitted with a digital display whose accuracy is not assured of. This project employs the use of pressure sensors below the fuel tank. Fixing pressure sensor directly below the fuel tank allows for accurate data to be read and transmitted to the processor, thus accurate data about the fuel levels.
The application of pressure sensor under ...

Verification of the Beer-Lambert Law for Solutions of Copper Sulphate and Determination of the Concentration of a Given Solution of Copper Sulphate

Introduction

The determination of elements concentrations in water media is an important task in industry, medicine, and environmental protection. The main requirements are accuracy, simplicity of operations, speed and cost of the analysis (Hunt 1995). The spectroscopic analysis is widely applied for routine measurements and research needs (Lindon 2010). The experiment is dedicated to determination of copper sulphate in water using the molecular absorption (Kenkel 2003). The first stage of the experiment performs absorbance measurements of the solutions ...

Report: Design and Fabrication a Business Card Holder

Introduction
In the current semester, all students have been assigned the task of designing and fabricating a business cardholder. Through the course of the semester, we have learned many techniques and acquired skills in the design and manufacture of 6061-T6 aluminum stock parts. Working hands-on in the cardholder business improved our understanding of the manufacturing techniques and other skills taught in class. The experience has prepared students for entry into the engineering industry.

The assignment involved cutting and machining a 6061-T6 aluminum bar to create a business cardholder while documenting each step of the process in order to make ...

Objective

In this experiment, we examined the motion of a simple pendulum constructed from a bob hanging from a long, thin string attached to the ceiling. We wish to confirm that the period of the pendulum depends not on the mass of the bob, but only on the length of the string and the acceleration due to gravity. We also wish to obtain an experimental value for earth's gravitational constant, g, which is known to be 980.35 cm/s2.

Discussion

Two approaches were used to make an experimental determination of the value of g. The first approach involved measuring a single period 100 times, using a stopwatch. ...

Industry Report

Introduction
Annual reports are documented and published by an organization or an entity covering the financial events and development of the organization for the past one year. According to numerous business scholars, accountability is a significant factor that needs consideration in developing a company or organization report. Business reports highlight the events, particularly the financial reports and milestones of the enterprise. The target groups could be the employees, clients and potential clients, interior and exterior investors, and the authorities.
Throughout the annual report, every important business event should be described, highlighted, and analyzed. The events are primarily analyzed to ...

Introduction

There are many resemblances that can be observed in magnetic and electric phenomena. A magnet comprised of north and south poles which are opposite to each other. The opposite poles attract and likewise repel each other. A magnet has principle property to influence the surrounding space. This surrounding effect of a magnet is known as a magnetic field.
Magnetic fields consist of lines of force and force of attraction and repulsion that travel/or move along the lines. The developed forces depend on strength and distance apart the poles.
Figure 1: Magnetic lines of force for bar magnet
A ...

Report to CEO and Senior Management at Riptide

Consultant’s Name
Report to Riptide: Meet and Beat the Competition with
Information Technology and Information Services
Riptide has offered high quality surf wear over the years with its winning combination of manufacturing its own products and selling its high-end products at medium prices. Riptide was a success without overstretching its capabilities as a medium-sized business. Most important though, has been the ability of the founder/owner’s charismatic and intuitive abilities to communicate one-on-one with customers and stay ahead of popular trends. The combination of understanding the customers, offering personal customer service and consistently offering high quality products ...

INTRODUCTION

Theory
Electrical resistance is one of the most important properties of materials. It is defined mathematically as the ratio of voltage to the current passing through a conductor. In physical sense, it is opposition a material offers to the current flowing through it. This opposition to the passage of electricity is a result of collisions between charge carriers and other sub atomic particles. The collisions reduce the drift speed of electrons that carry charges. Materials that offer greatest opposition to current flow are called insulators while those that allow current to flow through them with minimal hindrance are called insulators.
...

Research Paper

Introduction 3

Relationship between resource utilization and forecasting (effective forecasting and predicting) 5
Economy of UAE 5
Hotel Industry of UAE 6
Tourism Sector in Abu Dhabi 7
Application of effective forecasting and predicting in the Hospitality Industry 7

References 8

Appendix (1) 10
Interview questions 10
Appendix (2) 11
Questionnaire 11
Introduction
The events such as globalization and technology development have increased the competition in every business segment and thus managers in organizations need to plan innovative practices so as to develop the ability to manage business processes effectively and predict ...