Volume Reports Samples For Students

Abstract

The experiment aimed at explaining the interaction of the molecules at different pressure, temperature and volumes. At low temperatures, the volume of the gas was low while at high temperatures, the volume of gas increased. The experiment successfully determined the value of absolute temperature using the Charles’s Law as 202.75OC which was lower than the theoretical value. The experiment also successfully verified the Boyle’s Law. The interaction of temperature and the volume of the fluid can be concluded to be directly proportional with an increase in temperature leading to increase in volume. On the other hand, the ...

Abstract

The experiment aimed at monitoring the change in volume of a gas in a confined container as the pressure on the gas was being increase. The experiment successfully demonstrated that volume decreases as the pressure on gas is increased.

Introduction

Boyle’s Law involves the relationship that exists between volume and pressure of an ideal gas, assuming that the mass and temperature of the gas is held constant. The law is stated that for a fixed ideal gas amount kept at a fixed temperature, pressure (P) and volume (V) are inversely proportional. This means that when one parameter is increased, the other one decreases. ...

Introduction

The purpose of this experiment is to assist one to learn how different equipment in the laboratory is being use when carrying out the experiment. It tests the level of accuracy required when using different apparatus for measuring the volume. For very approximate result of volume, a beaker or conical flask is preferred when measuring volumes of liquids.

Accurate methods of measurement

This is done by the use of burette, conical flask and pipette. These measuring apparatus are discussed below.
When a much more accurate measurement is required, always measuring cylinders are preferred Measuring cylinders, which are much more accurate than beakers and conical.

Also volumetric pipettes and volumetric flask the mostly used apparatus used when measuring accurate volume.

...

Objective

Main objectives of this lab are:
learn and practice to use a graduated cylinder, pipet, and buret for volume measurements;
determine average volume of a water drop using volumetric ware;
find the density of liquid and a solid using mass and volume measurements.

Hypothesis

Average percent difference indicates volumetric ware’ accuracy and precision. In this lab pipet out of all volumetric ware will have the highest accuracy and precision and, therefore, lowest average percent difference.

Materials

In this lab, the following materials were used:
graduated cylinders;
beakers;
burets;
plastic droppers;
pipets;
rubber stoppers;
unknown liquids.

Procedure

The graduated cylinder
The graduated cylinder ...

Introduction

Initially there were beliefs that, MMPs are jointly able to degenerate all constituents making up the extracellular matrix (ECM) together with basement membrane that confines their operations to tissue reconstruction as well as the preservation. Nonetheless, the contemporary studies also signify that MMP-1 is responsible for controlling the production or else the activation of the chemokines. At this point, it is critical to understand that MMP-1 is among other MMPs.
Similarly, the knowledge holds it that MMP- 1 cleaves a peptide bond beforehand a residue comprising of a hydrophobic adjacent chain, for instance Met and Leu. The other sideways chains cleaved ...

Value Chain

The objective of analyzing Monster’s value chain is to make a product that will become popular to its customers, which includes not only the production segment but also marketing and distribution (Horngren and Data, 2015). This is because products will eventually need to be discontinued due to changing customer preferences and product innovation from competitors. This means that the company’s core operations and its products must continuously evolve and this could be done using the value chain analysis tool. For an energy drink company like Monster, one of its main goals is to continuously adapt to the ...

(Author, Department, University,

Corresponding Address and email)

Acute ischemic stroke refers to the death of brain tissue caused by interruption of the blood flow to brain. This interruption is caused by occlusion of a cervical or cerebral artery, or cerebral vein (Uchino, Pary, & Grotta, 2011). It is among the leading causes of death in the world. According to the estimates of American Heart Association, nearly one stroke occurs in every 40 seconds in the U.S., approximating 795,000 cases of stroke per year (American Heart Association Stroke, 2015). Assessment and management of acute ischemic stroke patients need to be done as soon as ...

Report

Introduction:
Greek mathematician Archimedes invented that an object at rest, and partially or completely merged in a fluid (gas or liquid) is acted upon by an upward buoyant force that is of equal magnitude as the weight of the displaced fluid by the object. This is known as Archimedes’ principle of buoyancy. According to the principle, the volume of the displaced fluid is equivalent to the volume of an object that is immersed into a fluid or equivalent to the submerged portion of the object below the fluid surface, and magnitude of the buoyant force is equivalent to the weight ...

Introduction

During the Solubility Product experiment you calculated the Solubility Product, Ksp, for calcium hydroxide, an ionic solid that is sparingly soluble in water. This was achieved by titrating a saturated solution of Ca(OH)2 prepared at a certain temperature. The saturated, aqueous, solution of Ca(OH)2 is represented in equation form as shown below.

The equilibrium expression for calcium hydroxide is shown below.

Ksp = [Ca2+][OH–]2 Eq. 1
Equilibrium constants are temperature-dependent and the value of an equilibrium constant can be related to temperature and the Gibbs Free Energy, Gº, through the equation:
∆G°=-RTlnK Eq. 2
In this case we can substitute our ...

Comparison of sales volumes

The mean is the average of values in a given set of data. In this case, the average sales volume gives the average volume of sales for each salesperson over the six week period. The means can be used to compare the sales volumes of the four salespersons and rank them. The mean is obtained by getting the sum of the volume of sales for all the six weeks then dividing by the number of weeks under consideration.

Determination of the mean volume of sales

Mean volume of sales = Total sales/6 weeks
Salesperson A = (1774 + 1808 + 1890 + 1932 + 1855 + 1726)/6
= 10985/6
= 1830.83
Salesperson B = (2205 + ...

Lab Report: Four Stroke Internal Combustion Engine Simulation

Introduction
Internal combustion engines work utilizing the results of combustion as the working liquid as opposed to as heat exchange medium. The combustion is carried out in a way so as to yield high pressure gaseous products with sufficient energy to rotate a turbine or move a piston. The development of these high pressure systems presents various elements that significantly impact the formation of contaminations.
There are three essential categories of internal combustion engines: (1) the spark ignition engines that are usedto drive automobiles; (2) the diesel engines, which is are used to run heavy vehicles and heavy machinery; ...

Introduction

Osmosis refers to the net water movement across a membrane, which is selectively permeable and the movement is driven by a difference in the concentration of the solutes on the opposite sides of the membrane. A selectively permeable membrane allows water to pass through without allowing ions or solute molecules to pass through. Other small molecules that are not charged are also allowed to pass through the membrane. Diffusion, on the other hand, refers to the movement of molecules in a random motion as a result of the kinetic energy and causes the molecules to have a net movement from areas where the particles ...

Introduction

In this experiment, we are interested to determine the heat change of two different reactions using the ice calorimeter. The heat change values are applied together with the given values of the heat transformation of water (∆H(H2O)) and the application of hess law to establish the heat of formation of MgO (∆H(MgO))
A formation reaction has a defined stoichiometry which makes them ideal constructs to be investigated by the Bunsen ice calorimeter. When the heat is released by the reaction, it causes the ice to melt and the volume of the ice-water mixture to contract. From the ...

Introduction

This experiment is about the experimental measurement of the density of different substances using laboratory measuring equipment. The four measuring equipment used are the following: the digital caliper, the digital micrometer, the traditional platform balance, and the digital scale. The first two instruments are for measuring length; the last two are for measuring mass. These instruments have varying levels of precision and will be used accordingly as needed in the experiment. The dimensions of the substance will be measured using length instruments; after finding the dimensions, the volume of the substance can be computed based on the type of ...

Lab- Accumulator

Purpose
The purpose of this lab report is to understand the working of accumulator machine in the various working environment.
Theory
A useful application of the accumulator is to provide the ready source of the hydraulic power; thus the pump is running constantly. This application permits the small pump and the accumulator are to deliver a high output for the required intervals of time. The pressure switch is being used to charge the accumulator in the pressure level. The hydraulic solid pressure is sufficient for this operation. The regular piston accumulator is used as the mounting bar. ...

Introduction

Accurate and precise measurements are of uttermost importance to chemists everywhere. A measurement is said to be accurate when it is very close to the accepted value. A precise measurement is one in which repeated measures yields values or figures that are very close to one another. However, not all measuring instruments have an equal ability to give accurate and precise measurements. In any given experiment, the techniques and the equipment used to collect data should essentially be of the same precision. In the course of an experiment, there are bound to be less precise measurements and it these ...

Abstract

Thermal physics is very important when studying the thermal properties of matter. One of the most important characteristics is the heat capacity ratio that compares the heat capacity at a constant pressure (Cp) to that at a constant volume (Cv). By heat capacity, we refer to the quantitative aspect of the heat emitted or gained in a matter in regard to the temperature change experienced. This quantity is expressed in units of Joule per Kelvin. Heat capacity is denoted by the gamma symbol (ɤ). Whenever a gas is heated, the volume increases leading to more force being exerted on the ...

Aim 2

Introduction 2
Apparatus 2
Method 2
Results 4
Discussion 5
Other methods used to determine specific gravity 6
Conclusion 7

Work Cited 8

Appendix 9
Aim
Introduction
Specific gravity is the comparison ratio of the mass of a model to the one of an equal volume of the standard substance. Specific gravity is an intensive characteristic of material. The same property can be used for analysis of velocity and other aspects of engineering design. In this experiment, the specific gravity is the ratio of the mass of a unit volume of a given soil sample at a certain temperature to the mass ...

Calculations and Analysis

Analysis questions from lab: Part 1
Which side of the pan balance is lifted as you poured in the water? Was the solid cylinder forced up by the buoyant force of the water?

The left side; yes, slightly.

What happened to the left pan as you added water to the hollow cylinder? What can you say about the volume of the water you added to the hollow cylinder and the volume of the water (in the beaker) displaced by the solid cylinder? According to Archimedes' principle, should these volumes be the same?
As water was added to the hollow cylinder, the left ...

Executive summary

The complex nature of a business process is defined by examining the role promotional activities. The impact of defining significant market segment is to establish an ideal customer base and among other factors, the advertising market is composed of information sharing metrics. In order to examine the potentiality of the clients, the impact achieved by promotional capacities is provided within a shared target including in segmentation and proportioning the distribution mechanism. Sales promotion includes examining ideal marketing perspectives including offering discounts and improving the relationship between the clients and the market factors. Thus, in the proportional capacities, the participatory composition includes ...

D.
- The location of the equivalence point on the graph
An equivalence volume for the reaction can be determined using the point in the graph with the greatest slope (Clark, 2002). This point was between 14mL and 16mL of NaOH. The equivalence point is determined by the midpoint between the two points, which is 15 mL.
- The volume of NaOH added at the endpoint of the titration for the first trial
- The volume of NaOH added at the endpoint of the titration for the second trial.
The volume of NaOH that ...

Management Accounting – Concepts and Classification of Cost

Introduction3

Purpose of Cost Classification.3
Costs Analysis in the Selected Company4
Scope of Activities of the Company..4
The List of Costs for the First Quarter..5

Classification of the Listed Costs, Cost Allocation6

Costs Classification by Period7
Costs Classification by Behaviour.8
Costs Classification by Business Function8
Importance of Costs Classification and Costs Allocation.10
Importance of Cost Concepts for Decision-Making.10
Some Practical Aspects of Cost Concept Application11

References14

Management Accounting – Concepts and Classification of Cost
Introduction
One of the most important tasks of the management of any company is to get most out of its available resources, to achieve the greatest output of work. This requires information on the ...

Aims

1. To observe and investigate the effects of osmosis across the cell membranes of a plant.
2. To investigate the ability of different molecules to diffuse across a selectively permeable membrane.

Introduction

All living cells are enclosed by an outer covering known as plasma or cell membranes. In addition, these plasma membranes serve as barriers between different compartments in the body to confine processes and materials to certain locations. Examples of these processes are diffusion and osmosis which are the main physiological processes that play important roles in the body. Diffusion can be defined as the process by which molecules move ...

Aims and Objectives of the Experiment

This experiment aims at studying the characteristics of titrations with the strength of different acids used in these titrations. This is done by drawing the titration curves of the different titrations that are carried out in this experiment and interpreting those curves. The units of measurement for this experiment are the standard units that are used in titrations. These are molarity (moles/liter) of substances while the quantities are measured in mL (milliliter).

Theory and Principles

Conductometry is a type of electroanalytical method in analytical chemistry. While other electroanalytical methods use equilibria or electrodes, conductometry is different and employs the conductance of materials ...

Panther I.D.:

“The expression of ampicillin resistance and luciferase enzyme genes by E. coli transformation using the pUC18 and lux plasmids”
Abstract
The transformation process allows the uptake of DNA from the environment, with the incorporation and expression of genes. During this process, changes in the DNA of the receptor cell occur, producing some selective advantages in some cases, such as resistance to antibiotics. pUC18 and lux plasmids were used to determine the transformation process in Escherichia coli. Cells were made competent by the addition of calcium chloride and heat shock in order to induce the incorporation of the ...

ID Information: Last Name, First Name, date, Locker #, Course/Section #, lab partner’s name

The purpose of the experiment is to study the density of unknown solutions of different concentrations.

References:

Suzanne Slayden, 2015, Chemistry 211, 212, 251 Laboratory Experiments, 6th Edition, GMU Bookstore, Johnson Center, page 35 - 45
Materials and Chemicals:
The materials required for the experiment are:
10ml volumetric flask
Electronic gram scale
A solution which is unknown
3M NaCl solution
Procedure:
The procedure of the experiment is as follows: (Suzanne, 2015)
A clean and dry 10.00 ml volumetric flask with a stopper was weighed on an electronic ...

Article 1: Radiation Associated Brainstem Injury

The tolerance of the central nervous system (CNS) to radiation treatment is significant to patient under treatment for metastatic or primary diseases associated with neck, brain and head. In most cases, brainstem injury is graded by most widespread toxicity criterion of the Cancer Therapy Evaluation Program based on symptoms. The first grade is considered mild, the second grade is moderate and without the capacity to interfere with daily living activities. The third grade presents extreme interference with the activities of daily living while the fourth grade is life threatening. The manifestation of severe radiation therapy induced central nervous system ...

Introduction

The section under analysis covers the distance from Milton Road in the West Butler Avenue to Ponderosa Parkway in the East Butler Avenue. This is a multilane highway with 4 lanes covering a distance of three miles. The avenue is both divided at some section and undivided in others with numerous access points. The traffic projections over the next six years are calculated using an estimated 5 percent growth rate in hourly traffic volume. The report also analyses whether the 4-lane highway will accommodate the projected traffic in 2020. Data collection was done through online research and physical observation of the ...

Background theory

Equipment used in the experiment: Burette, pipette, pipette filler, clamp and stand, a small and a large beaker, three conical flasks, white paper, phenolphthalein indictor, dilute solutions of HCl and H2SO4 of unknown molarities, and 0.10 dm–3 NaOH.

Equations, diagrams, and calculations:

Concentration of the sulphuric acid solution
Molarity of the alkaline solution of NaOH 0.10 mol. dm–3
As found in the experiment,
Average volume of H2SO4 is 11.15 cm3 = 0.01115 dm3
H2SO4 → H2+ + SO4–
NaOH →Na++ OH–
H2+ + SO4–+ 2Na + 2OH → Na2+ + SO4–+ 2H2 O
Thus, the hydrogen ions in H2SO4 reacted with hydroxide ions ...

Abstract: 2

Product 3
Place 4
Price 4
Promotion 5
Social media 5
Televised communication 6
Personal selling 6
SWOT Analyses 6
Threats 7
Findings 7
Challenges 8
Opportunities 9
Recommendations: 9
Conclusion 11
Last US bag 14
Abstract:
The Last US Bag company is a leading company which provide its consumers customized products and services and it is the main promotional strategy of the company. The market mix explains that the company is strong in its products and are able to cover maximum areas for its supply chain. There are explanations about the company’s SWOT analysis and recommendations from ...

Organizations apply the analysis of break-even to make price decisions of their products, understand the costs that are involved in the production, and make a decision on the volume of sales achieved that can make the business profitable. In this plan of activities, Mission Hill Wine made total sales of its wine at $12, 500 in 2015 and incurred a variable cost per unit of $700 and a fixed cost of $ 8million. Therefore, the break-even would be determined as:
In terms of units, BEP = 8,000,000/ (12,500-700) = 678 units.
In terms of sales, BEP =678 units*12, ...

Abstract

Transformation remains, and hugely significant tool in extending the borders of life sciences and medicine. It can be referred as fixing intracellular DNA into a bacteria or organism through the vector, thus transforming it. This paper uses plasmid pUC18, self-reproducing circular/spherical strands of genes that may be modified. After the bacteria absorb the vector, some proteins not usually synthesized will occur. In this study, a system has been developed to monitor the transmittance of different DNA (genes) from a genetically transformed strain of Saccharomyces cerevisiae to E. coli. This mechanism is centered on yeast strains that contain several integrated ...

Introduction

Substances vary from one another in the amount of heat needed to produce a rise in temperature in a given quantity of gas. The quantity of heat needed to change the temperature of a system is proportional to the mass of that system as well as the change of temperature. This is expressed as where Q is the amount of heat required, m is the mass of the system, c is the specific heat, and is a change in temperature. The values of specific heat depend on some extend of temperature. In small temperatures, the specific heat is considered ...

Please find my recommendation report to the China based Linyi Hannover Bar & Grill overleaf.

The report follows from the proposal previously submitted and is prepared for the attention of the restaurant’s General Manager, Financial Manager and Executive Chef who are the key decision makers in the company.
The recommendation report explores the option of purchasing fresh food ingredients daily in-market versus using a food supply delivery service to have the ingredients brought to the restaurant. This is done by mainly looking at several factors relevant to restaurant operations such as budget, quality of ingredients, desired frequency of supply, legal and financial risks, as well as the operating environment. The delivery service method ...

Introduction

A budget is a systematic way of allocating human, physical and financial resources so as to achieve the strategic goals of a business or an organization. Budgets help businesses to monitor their progress towards the set goals and objectives. The practice of involving the managers in budget making rather than simply imposing budget on them is called participatory budgeting. The main reason behind involving the managers in the budget making process is to assign responsibility to subordinate managers and place some form of personal ownership on the final budget. Over the last two decades, management accounting research has resulted in ambivalent ...

Introduction

An acid that gives two hydrogen ions for every acid molecule is known as diprotic acid. Examples of such acids are sulfuric acid (H2SO4), hydrogen sulfide (H2S), oxalic acid (H2C2O4), chromic acid (H2CrO4) and carbonic acid (H2CO3). Dissociation of a diprotic acid in water takes place in two stages. In the first stage, the diprotic acid dissociates to give one hydrogen ion and a monoprotic form of the acid.
H2X(aq) H+(aq) + HX-(aq)
The second stage involves the dissociation of the monoprotic form of the acid to give the second hydrogen ion and fully dissociated form of ...

Section A: Strategic Case Analysis

In this section, the current business and corporate implemented strategies of Willie’s Wraps will be analyzed and defined. Just a brief background about the company, Willie’s Wrap was founded by brothers Richard and Fred Willie who were both machine operators in a components factory in 1981. After the said factory was closed, the Willie brothers used their redundancy pay to purchase machines to star-up their own wrapping business. They generally acquire their market from start-up companies looking for affordable wrapping solutions. The business grew in volume and range as the Willie brothers have learned more and more about their ...

Introduction

At first glance one would think that Philippe Starck’s iconic juicer was a spider-inspired piece of artwork due to the three long legs that supports what seems to be a rocket ship-shaped body. Surprisingly, the designer actually thought of the similar inspiration. The juicer is now considered as an icon of contemporary industrial design; it even earned its place in New York’s Museum of Modern Art. However, the juicer itself according to Starck was intended to be a conversation piece rather than a juicer. In 1989, Alessi originally approached the Italian designer to design a stainless steel tray, but after a trip to a ...

for Argentina and Hungary
Olomoze’s products would be aggregated in the group or category where tea milk and bubble tea are also classified. From the industry or macroeconomic perspective, while they may be differentiated, these products are considered as alternatives or substitutes to each other . Instead of using dairy or ice cream industry data (which comprise a bigger industry), Taiwan’s aggregated demand for tea milk and similar products are used for demand estimation.
Taiwan’s consumption of or demand for these products is estimated at about 1.5 billion cups a year. Each cup is about 8 ounces, ...

Results

From the experiment conducted, the following observations were made: Firstly, in regard to volume of flow a long Ashland Creek, site number one had the least volume of water flowing. The volume of flow then rose steadily across sites 2, 3 and 4. Secondly, water temperatures were observed to be slightly higher in site 1 as compared to site 2. The temperatures then dropped slightly across site 3 and rose steadily across site 4. In regard to the amount of dissolved oxygen present, site 1 had the highest amount of oxygen present. The levels dropped slightly in site 2, rose a ...

Introduction

Globalization of economies and the strengthening of political and economic relationships in the European Union have had the significant influence on the development of retail industry in the country. The fashion industry is highly dependent on the social and economic trends. With increased mobility of individuals and the digitalization of the markets, companies are obliged to look or ways to further enhance their brand and become more responsive to increasingly dynamic fashion market and consumers, who are more demanding with regards to the short lifecycle of the products today, than ten and even five years ago. Moreover, competition on ...

Introduction

The flow of a given volume of fluid through a pipe requires a given amount of energy. In order for fluid flow to occur, there must be pressure or energy difference. During fluid flow through a pipe, energy is lost. The main causes of this loss are the resistance encountered by the fluid in the process of its movement through the pipe. Viscosity is one of the most common forms of resistance to fluid flow through a pipe (Noltingk, 1985, p. 5). Fluids that have high viscosity tend to exhibit high resistance while flowing through a pipe (Considine and ...

Introduction

The fiber optic systems are systems which use light as a mode of communication. The system includes fiber cables which allow for the transmission of light through them. Inside the cable are special coatings for protection and also to enable the transmission of light through total internal reflection (Hoss and Lacy). The light is then converted into electrical signals through the use of light detectors having in mind that the signal was produced by a light emitting diode. The use of optics is very wide since the use of light is much more efficient and also flexible being that ...

Measuring Campaign Effectiveness

The importance of proper coordination between the sales and marketing functions of any organization is a matter whose importance cannot be overemphasized. Although both functions are geared towards maximizing sales and profits, improper coordination often leads to wastage of resources as the sales agents chase leads of low quality, delay the follow-up of leads or dedicate insufficient selling effort towards high potential leads generated by the marketing team. The selling units, on the other hand, more often accuse the marketing team of generating low-quality leads. This situation necessitates the need for an Integrated Marketing Communications Framework (Clow & Baak 2004). ...

Ischemic Heart Disease in Older Adults

Ischemic Heart Disease in Older Adults
Older patients frequently suffer from ischemic heart disease either in isolation or in combination with other processes (Butler, 20120). As a common clinical syndrome, heart failure is the result of impaired cardiac functioning of the action of pumping the blood through the body. Signs and symptoms of ischemic heart disease include fatigue and an inability to tolerate exercise and edema of the abdomen, legs, ankles, and feet. Although heart disease has a poor rate of survival, early diagnosis and treatment may improve life expectancy. The goal of nursing intervention is to extend life ...

COMPARISON OF ISOTONIC ANF ISOMETRIC STRENGTH TESTING

Methods: 10 males and 3 females in the age range of 21 to 32 years were tested for hand grip strength. Their height ranged from 65 to 74 inches and weight ranged from 158 to 260 pounds. The BMI range of the subjects was from 21.9 to 38.3 Hand-grip measurements and bench press tests were perfomed on these subjects. The Average 1 RM hand-grip, Average Handgrip, Arm Strength were estimated for each subject. Combined scores from the isometric tests -Arm plus Shoulder, ∑ of 4 isometric tests, Isometric minus handgrip were also estimated.
Results: Linear regression and the R-squared ...

INTRODUCTION

Consolidation is a process which involves a decrease in water content of saturated soil without replacement of water by air (Terzaghi 265). During the process, two changes occur: (1) reduction in soil volume and (2) increase in soil strength. The results of this test are used in the study of fine-grained, cohesive soils such as clay and clay-silt. Generally, an undisturbed sample is fitted into a consolidation device.
This consolidation device consist of a heavy brass metal ring to hold the soil sample being tested and porous stone discs to cover the top and bottom surface of the sample. The discs enable ...

Introduction

The kidneys refer to the organs that are involved with several important regulatory roles in vertebrate animals. Kidneys play a crucial role in the urinary system as well as in the homeostatic functions such as electrolyte regulation, maintaining a balance between the acids and bases, and in regulating blood pressure. Kidneys filter the blood removing wastes, which are then taken to the urinary bladder as urine. During urine production, wastes such as ammonia and urea are excreted while substances such as glucose, water and amino acids reabsorbed. The kidney is also responsible for the production of hormones such as erythropoietin and ...

Activity-based costing focuses on the activities on specific items and not the products of a given firm. In addition, activity-based costing effectively identifies specific activities within a firm whilst assigning the associated costs on the basis of the levels of consumption. Notably, activity-based costing is different from conventional costing on the basis that the former categorizes overheads as direct costs. Theoretically, Competition Bikers merger should not adopt activity based costing as a replacement of the conventional accounting system but as a complimentary or additional accounting system. This will help to transform the company’s accounting process into an authentic state.
There may ...

Dr. Professor

Paracetamol is crystalline white power with the scientific name N-(4- Hydroxyphenyl) acetamide. The chemical formula is C8H9NO2 and its structure is

Properties

The melting range of paracetamol is 168 to 172oC and its solubility is 14.3g / dm3 of water and ethanol’s 100g / dm3. It is insoluble in ether and dissolves quickly in chloroform. It dissipates uv absorption minimum in aqueous acidic medium at 245 nm and has uv absorption maximum in aqueous alkaline medium.

Assay

Through titration, paracetamol is analyzed using ceric ammonium sulphate. In the titration, Ferroin plays the role of indicator. It is also assayed ...

Introduction

Cardiovascular physiology involves the study of the circulatory system. It addresses more specifically the physiology of the heart and blood vessels hence the name cardio and vascular. Rabbits are generally nervous and non-aggressive and sociable with each other. In this laboratory, the primary experimental variables were the heart rate and arterial blood pressure. The main goal of this laboratory was to investigate the effects of different hormones on the rabbit’s blood pressure and heart rate by means of intravenous injections, nerve stimulation and respiratory alterations. We hypothesized that the catecholamines would increase the heart rate and blood pressure ...

Research Question

The effect of increasing the concentration of two reactants, i.e. Calcium Chloride solution and Sodium Carbonate solution, on the percentage yield of Calcium Carbonate is to be studied in this experiment. The efficiency analysis for the production of Calcium Carbonate (also known as chalk) is to be carried out.
The dependent variable in this experiment is the percentage yield of Calcium Carbonate, expressed as percentage (%). The independent variable is the concentration of the reactants, i.e. Calcium Chloride solution and Sodium Carbonate solution. The concentrations are expressed in moles/liter or moles/dm3. While the control variable is the mass of the ...

Abstract

Phillips Morrison International is one of the most iconic brand in the tobacco and cigarette industry. Rated as the most innovative company in the industry,over the years, Phillips Morrison has diverted their focus on emerging markets that account for 80% of the global demand,while the westernized consumers are being introduced to next generation products. However, the focus of the company remains in Asia Pacific region as it looks to target growing population of India, China and other Asia Pacific regions. Even on the financial terms,the company is performing better than its core rival, British American Tobacco ...

Business Analytics

Executive Summary
This study sought to assess whether customers who bought the African adventure will be willing to provide feedback. The study revealed that there more customers who are unwilling to provide feedback compared to those who are willing to provide feedback. A regression analysis was used to determine the factors that influence WOM intentions. WOM intentions were modelled as a function of age, income, trust and attitude. The analysis revealed that the demographic characteristics (age and income) do not influence WOM intentions. However, trust and attitude influence WOM intention. The paper recommends that smart marketing and advertising should ...

Integrative Research Project

Abstract
This research project aims to establish how the organization can increase its competitive advantage by requiring supply chain vendors to meet ENOC’s standards. A qualitative research methodology was used, and the research design is to carry out semi-structured interviews over the telephone. The semi-structured interview allowed interviewees to expand on their thoughts and experiences while the researcher guides the conversation to say on the topic. Interviews were performed over the telephone with employees at ENOC and employs with ENOC’s supply chain vendors to collect data. The data analysis was carried out by evaluating the results of ...

IKEA Company: Is the Company Success Sustainable?

Report

Abstract
IKEA today is more than a company, it is a community of highly motivated people who share the company’s values, mission, and goals. Being one of the global leaders in the sphere of household goods production, IKEA adheres to the proactive position in environmental and social issues justifying the branded idea of creating a more sustainable home life. In this paper, the sustainability factors affecting the success of the company on the international arena are analyzed. IKEA presented an unrivaled consistency in the realization of various ecological and social projects, in cooperation with suppliers and partners ...

Section

Introduction
The purpose of this lab was to investigate the stoichiometry and find out the mole ratios of simple acid-base reactions experimentally. The reactions studied in this experiment were the following:
HCl + NaOH → H2O + HCl
H2SO4 + 2NaOH → 2H2O + Na2SO4
H2SO4 + Ba(OH)2 → 2H2O + BaSO4
HCl + Ba(OH)2 → 2H2O + BaCl2
In the chemical reactions, the compounds react in distinct molar proportions or ratios which are constant to the peculiar reaction. The ratios determining the quantities of substances reacting are called stoichiometric coefficients. The reactions between strong acids and bases are relatively simple and non-reversible reactions the “end” of ...

PART 1. Measurement of liquid and plastic limits of a material

Introduction
The lab is performed to test the plastic and liquid limits of soil. The liquid limit is arbitrary referred to as the water content in percentage at which a part of the soil in a standard cup by a groove of standard measurements flows together at the base of this groove for about a half-inch (13 millimeters) when subjected to twenty-five shocks from the standard cup being dropped ten millimeters in a standard liquid limit apparatus that is operated at a rate of 2 shocks/second. Plastic limit is referred as the water content in percentage at which the ...

1.0 Introduction
The project report encompasses the analysis of marketing decisions in a smartphone marketing company as well as product mix utilizing the simulation game. Firstly, it will give brief background information on the online marketing tool, Simbrand, and the marketing company, Team Grey. After that, it will outline the methodologies used in the report. Subsequently, the study will analyze the market by evaluating its environment, segmentation and the targeting strategy. Afterwards, the study will embark on a comprehensive analysis of six rounds over which the company collected market and products data and eventually produced relevant reports. In the ...

Analysis of Plant Pigments with Liquid Chromatography and Spectrometric Detection

The experiment is aimed at coming up with a solution of knowing on how to separate color pigments in a mixture of some solvent. An appropriate solvent is put into use and then some conclusion is drawn from the observations made. The following could be the

- The extract becomes darker progressively due to the fact that the spinach solution becomes more concentrated with the subsequent extractions of the acetone solution. It is observed that the extracts starts at around 10ml of the organic solvent, but as the experiment proceeds, the volume becomes 2.0ml which was almost as the same volume ...