Essays on Load

* Names of Group: 1. .. ID #: 2. ID #: 3 ID #: * Date: / / .

Results:

Based on measurements, complete the table below: Discussion: Discuss the application of common collector transistor circuit. The common collector configuration of the BGJ amplifier is mostly commonly employed as buffer or emitter follower. The voltage gain of the common collector amplifier is nearly unity and provides large current amplification. It is used in applications where current sourcing is required without modifying the voltage. The input resistance is quite high so it draws negligible current from source. Moreover, the load circuit will not interfere ...

Sustainable Built Environment

Introduction It seems that building development would present an impressive opportunity to reduce energy demand and also reduce carbon emissions effectively with combining current knowledge and expertise (Diakaki, & Kolokotsa, 2009). The highest cost-effectively feasible mitigation prospective is recommended to be found within the residential as well as the commercial sector. This is suggested to be producing a reduction of 29% in respect to the probable emission baseline for the year 2020. Life Cycle Assessment is also known as (LCA) is a technique for evaluating environmental pack of processes as well as products in their life cycle. It attempts to ...

Literature Review:

Factors and predictors of persistent lesion (positive hr-HPV DNA test or abnormal cytology) after treatment of high grade cervical intraepithelial Neoplasia with large loop excision of transformation zone (LLETZ) {Author Name} {Institution Affiliation}

Introduction

The Human Papillomavirus (HPV) infection is the primary factor that increases the risk of the cervical cancer development and cervical intraepithelial neoplasia (CIN) in the uterine cervix (Soderlund-Strand et al., 2014). Approximately 150 diverse types of HPV have been discovered, and most of them are carcinogenic. Persistent infections of high-risk HPV must lead to the development of high-grade cervical intraepithelial neoplasia (CIN 2 and 3), and ...

* Names of Group: 1. .. ID #: 2. ID #: 3 ID #: * Date: / / .

Discussion:

Using the measurements made in the procedure, calculate the quiescent current IE, and the internal emitter resistance re. The quiescent current IE and internal emitter resistance re can be calculated using the DC analysis carried out in Step#1 and Step#2 of the procedure. The DC voltage measured across RE is used to measure the biasing current across the emitter of BJT. The voltage is measured to be 793mV. Since RE = 1KΩ, so: IE=VERE=0.7931000=0.000793A=0.793mA.

Now, we can calculate the internal resistance of emitter using the formula provided in the procedure. So:

re=0.026IE=0.0260.000793=32.786Ω

Using the values obtained in the experiment; draw the small-signal ac equivalent circuit for the amplifier.

In this part, we will draw the small scale ...

Introduction

A load cell is a transducer used to convert a physical quantity (force) to electrical quantity (voltage). A strain gage is one of the commonest types of load cells. In these types of load cells, gages are connected to a structure that bends on the application of a force. A Wheatstone bridge circuit is a four type strain traducer that gives a maximum sensitivity as well as temperature compensation (Westwood 38). A quarter or half bridge are used to perform the same purpose. In the Wheatstone bridge device, two gages are under tension while the other two are in ...

The development of human society is inextricably linked to the use of our planet's natural resources, with the consumption of various types of energy in ever-increasing scale. All the achievements of modern civilization - a huge variety of goods, different in speed and comfort, transportation, space travel, etc., are possible thanks to the huge amount of artificial energy, which produces humanity. The basis for the production of thermal and electric energy is the process of burning fossil fuels -coal, oil, gas. The scale of the production and consumption of fossil fuels, metals, water, air for the production of essential ...

A DC circuit consists of a source (e.g. battery or power supply) and a load (e.g. light bulb or electronic instrument). The electrons move from the negative terminal of the source, towards the load and then return to the positive terminal of the source, i.e. the electrons flow in only one direction . This movement of electrons will continue as long as there is a closed circuit. In contrast, the source in the AC circuit is constantly changing. The voltage of the source builds up and electrons flow through the circuit in the same way as for the DC circuit. ...

Three phase induction motors

Introduction The three-phase induction machine is the most widely used among the rotating machines. An induction machine offers an almost constant speed within its normal operating range when operated off a constant-voltage, constant-frequency, and with the electric power source. The cost of purchasing these machines is very low, and they require little maintenance. However, speed control is difficult and very expensive. Therefore, the rotor current of the three phase induction motors is not induced by electrical connections, but rather the rotation of magnetic field.

Squirrel Cage Rotor construction

The rotor type of the motor is made up of a laminated core which is ...

Physical Activity for Alzheimer's Patients

The topic I have chosen is mostly based on my personal experience working in about six Emergency Department. My PICOT choice is personal to me because I see this problem frequently and I feel it’s unethical and needs to be adequately addressed. The population I am referring to is our senior citizens with Alzheimer’s disease. The intervention that I would like to see introduced is the use of improved therapeutic physical activity to treat their anxiety while in a hospital setting. The comparison would be to see how using physical therapy opposed to only medications can reduce ...

Q1 For the purpose of the paper five additive found in food were chosen. The chosen food additives belong to different types of additives. First picked was corn syrup, which was chosen since it is usually the additive added in soft drinks, which are being consumed in large quantities especially in the United States. The additive belongs to the group of sweeteners. It can be found in processed food, sweets, non-diet drinks, cereals, breads, pastries, candies, cookies, cakes, syrups, crackers, fruits, vegetables, ice creams, meat, salad dressings, sauces, snacks, and soups. The high-fructose corn syrup has been correlated with ...

Effectiveness of Supported Angel Heel Treadmill Rehabilitation on hip fractured patients

Physiotherapist DECLARATION I, the undersigned Fatih Serkan YILDIRIMER (print name), a student of the Faculty of Public Health of Debrecen University, being fully aware of my legal liability, do thereby declare and certify with my signature that my thesis, entitled

EFFECTIVENESS OF SUPPORTED ANGEL HEEL TREADMILL REHABILITATION ON HIP FRACTURED PATIENT

is my own original work and that the printed and electronic literature referred to in it was used in accordance with the international rules of copyright. I understand that in the case of a thesis, it is considered plagiarism when: ● quoting word for word without quotation marks and referring to literature without proper citation. ● referring to content without citing ...

Introduction

How materials behave is dependent on various factors, some of which include their mechanical properties. When the material experiences various loading conditions, its behavior reflects its mechanical conditions as well as the effect of the loading conditions. When a material experiences various loading conditions, the material experiences either shear stress, tensile strength, or compressive strength. The tensile properties of a material relate to its ability support any axial loads to which it is subjected without rapturing (Department of Engineering. 2007). When a material is subjected to tensile stress, the deformation that occurs is in the form of elongation or ...

Results

Deflection per Unit Load (mm/kN) The following method is used to calculate the deflection per unit load in mm/kN from the slope of the graph. Slope=y2-y1x2-x1=6.41-1.2820.19-0.03=32.05kNmm Deflection=132.05=0.0312mmkN

Strain per Unit Load (µƐ/kN)

The following method is used to calculate the strain per unit load in µƐ/kN from the slope of the graph. For Strain (positive) Slope=y2-y1x2-x1=6.41-1.28242-6=0.142kNμε Strain=1slope=10.142=7.042μεkN

For Strain (negative)

Slope=y2-y1x2-x1=6.41-1.28246-8=0.135kNμε Strain=1slope=10.135=7.407μεkN

Calculations and Discussion

Stress The following method is used to calculate stress per unit load in N/mm2/kN from the strain measurements. Stress=StressLoad=8.61×106-1.23×1066.41-1.282=1.439×106N/mm2kN Stress=StressLoad=9.43×106-1.64×1066.41-1.282=1.519×106N/mm2kN

The following method is used to calculate the theoretical value of maximum stress.

Maximum stress=MomentElastic Modulus Moment=Load×Distance=1kN×378.5mm=378.5 kN.mm Maximum stress=MomentElastic Modulus=378.574.94×10-6=5.05×106N/mm2kN The values of the above ...

Abstract

The document considers the use and conservation of energy in domestic dwellings using heating systems, specifically water heated boilers, which is the cheapest solution in the market for home heating systems in Ireland and Europe. The document starts with a literature review of the available home heating systems and focuses on boilers due to its availability and price. The literature review includes a standard boiler array for a typical house, the radiators materials, and key concepts to understand the use of boilers for heat generation in homes. Later, it is necessary the calculation of heat transference for a given ...

Results

Deflection per Unit Load (mm/kN) The deflection per unit load in mm/kN is calculated from the slope of the graph as follows. Slope=RiseRun=y2-y1x2-x1=6.4113-1.282260.2-0.04=32.0565kNmm Deflection per unit load=1slope=132.0565=0.031195mmkN

Strain per Unit Load (µƐ/kN)

The strain per unit load in µƐ/kN is calculated from the slope of the graph as follows. For Strain (+) Slope=RiseRun=y2-y1x2-x1=6.4113-1.2822642-7=0.146544kNμε Strain per unit load=1slope=10.146544=6.8239μεkN

For Strain (-)

Slope=RiseRun=y2-y1x2-x1=6.4113-1.28226-48-(-8)=-0.128226kNμε Strain per unit load=1slope=1-0.128226=7.799μεkN

Calculations and Discussion

Stress The stress per unit load in N/mm2/kN is calculated from the strain measurements as follows. Stress per unit load=StressLoad=8.61×106-1.435×1066.4113-1.28226=1.399×106N/mm2kN Stress per unit load=StressLoad=-9.84×106--1.64×1066.4113-1.28226=-1.599×106N/mm2kN

The theoretical value of maximum stress is calculated as follows.

Theoretical maximum stress=MomentElastic Modulus Moment=Load×Distance=1kN×657.5mm=279 kN.mm Theoretical ...

Dreams often come as crucial aspect of our lives and a focus of close considerations since they often are considered the inner sources which drive our actions and behaviors and vastly define who we are. Meanwhile, the deferred dreams have great impact on the personality and affects one's attitudes and perceptions in many different ways. Just as there is a diversity of dream, the experiences related to its deferral are both widely diverse and truly unique, as it may be seen in the characters of the “Fences” by August Wilson. This essay thereby aims to analyze the dreams of ...

Abstract

Materials exhibit different chemical and mechanical properties such as strength and durability. Combining different materials to form a material composite enhances their individual properties in different measures. In this experiment, the mechanical strength of composite sandwich structures was investigated through bending. Four samples were investigated for their properties on bending and strength. Three of the four polystyrene beams were reinforced with paper while the fourth beam was investigated without paper reinforcement. One of the beams was bonded with construction paper on one side; the next bema was bonded with construction paper on both sides while the third beam was ...

Define and discuss time and space utility

Products must be transported from the place where they are produced to the place where customers demand it to be delivered. The value-add that the product gains due to its transport is called space utility. The time utility is the length of time before or between the product deliveries, which consists of mostly storage and inventory time. When the organizations are able to deliver the goods at a time they are needed, then their time utility increases.

What is the Total Cost Analysis and how does is affect logistics?

Total cost analysis provides the methodology for integration of logistics, manufacturing, and procuring costs across the network. This is done to achieve ...

ENGINE MANAGEMENT SYSTEM

Introduction This study evaluates the operating principles of vehicle fuel systems, vehicle ignition systems and pressure charging of engines. The report attempts to evaluate the operating features of actuators and sensors used in the ignition systems and engine management system of vehicles. It also analyzes the types of pressure charging systems, its shortfalls and how it affects the enhanced power of the engine. The secondary sources which form the bulk of this report are primarily research from various sources. The paragraphs below look into the sensors and actuators and the pressure charging systems.

Sensors and Actuators

Types of Sensors and function The ...

Introduction

Newton's Second Law of motion asserts that the acceleration of an object exhibits a direct proportional relationship with the subsequent force acting on it. It explores the relationship that exists between force, mass and acceleration as exhibited by an object. This experiment examines Newton's Second Law of motion by enabling a dwindling weight to speed up a glider of recognised quantity along a track. A thread that links the dwindling mass to the glider is passed above a smart pulley (Knight, 2004). It is imperative to note that the smart pulley exhibits insignificant inertia, low friction and its revolution ...

Answer # 1

The main purpose of Saturn Corporation is to become profitable in the market, however, it is essential for the underlying company to manage its cost effectively in order to become profitable. It is central for any organization to reform its functions in general in order to cater the provisions of the business effectively. In this context, Saturn Corporation is expected to employ measures that could make it unique from its competitors. Particularly addressing the case scenario, there are several factors and issues that the vehicle transportation team of the underlying company must consider in the process of selection. Some ...

Various types of sexually transmitted diseases

The most common types of sexually transmitted diseases include HIV & AIDS, Human Papillomavirus (HPV), bacterial vaginosis and viral hepatitis. Apparently, while syphilis and gonorrhea have previously been mentioned as prevalent or common cases of STDs, there prevalence rates have significantly fallen over the years. For the currently common cases, they tend to possess common symptoms with a characteristic pattern on a weakened immune system (Centers for Disease Control and Prevention 67). Such include fever, abdominal pains, and abnormal odor of the vagina, anal soreness, bleeding and itching, frequent micturation, painful micturation, unusual discharge from the vagina or the penis, ...

Abstract

Over thirty years after its identification, HIV and AIDS remains a somewhat elusive virus, particularly when it comes to its history as a human infectious agent, and resourcing a complete epidemiology of the disease. Part of the problem is that so many antiretroviral drugs have come out and have either been used or prescribed incorrectly. In addition, the virus, like many other reverse RNA transcriptase viruses, has a very high aptitude in terms of developing resistance to drugs at a very rapid rate. What further complicates matters is how quickly it has spread. It will probably never truly be ...

Ethics in Accounting Profession

Facts: In the current scenario, the main issue is the deviant workplace behavior which is caused by the several workplace professional and ethical problems. On the basis of research, professionals are behaving unethical due to the certain routines in the organization. In the past, the demand and supply of the individuals were under control. However, in the current scenario, the professionals of the highest quality are facing workload. Moreover, the accounting professionals are expecting an increase in their salaries, according to the work load.

Ethical Issues:

The ethical problem with accountants in relation to the deviant workplace behavior is that it ...

[City and State]

Introduction

Structures such as large buildings can create its own unique internal environment that can significantly impact the comfort and health of its occupants. After many years of investigating and studying building infrastructures, engineers and designers have increased their understanding and knowledge on the environmental conditions that exists within the building in relation to its physical properties. For the same reason, a solid background in building physics is an integral part of a building’s design, particularly in this modern era wherein green buildings are the rising trend. Most modern buildings integrate building physics prior to construction ...

Learning to write more effectively is one task that many university students struggle to complete, for a number of reasons. Many of them move through middle and high school learning to write to a particular formula that will help them to pass a standardized assessment that is often necessary for graduation but has almost no resemblance to the sort of writing that they will be expected to do down the road in the professional world. Once those students come to college and find that there are many more ways to write than that cookie cutter formula that they learned ...

Fabrications of bike tipping trailers entail several materials and processes that are performed in specific sequence. The first step entails the installation of the steel trailer kit. Some of the basic components of this trailer include; the steel trailer kit, frame of the box and the box, the trailer wood support, hydraulic jacks, door hinges, steel brackets and aluminum connectors to the bike. It is imperative to ensure that all the components needed for the fabrication of the tipping bike trailer are is the required condition before the assembly and fabrication process is started. Different tipping bike trailers require ...

Introduction

In order to struggle spam, companies exploit spam traps for finding out and blocking spammers. A spam trap is a destination, which is used to lure spammer attacks. One example of spam traps is an email address, which is not used, but incoming traffic to this address is monitored. A lot of spam traps exist in the Internet expanses; they are generally managed by big anti-spam organizations (SURBL, Spamhaud), security companies (McAfee, TrendMicro), Internet Service Providers and corporate email server. The possible types of spam traps are typos (mistyped email addresses), expired addresses (not used for long time), purchased ( ...

Writing is an intriguing process, whether it is a small child learning to trace out the letters of his name or an accomplished author seeking to put the story that has taken shape in her mind down onto paper in words that others will understand and find compelling. The process of turning thoughts into words and then recording those words onto paper has long been one that has been a source of fascination, whether it was the creation of the dramas of the ancient Greeks or such world-changing essays as Jonathan Swift’s paradigm shift on the treatise in “ ...

[Class Title]

Introduction The Empire State Building is an engineering and architectural feat of its time. One of the most remarkable landmarks in New York City, the Empire State Building is the tallest building that was built in the 1930s and held that position for more than 40 years until it was surpassed by the World Trade Center building in 1972. The Empire State Building was constructed as the backdrop of the Great Depression that happened right after the stock market crash of 1929. But despite the economic challenges, the builders were able to finish the construction in a ...

Introduction

In order to struggle spam, companies exploit spam traps for finding out and blocking spammers. A spam trap is a destination, which is used to lure spammer attacks. One example of spam traps is an email address, which is not used, but incoming traffic to this address is monitored. A lot of spam traps exist in the Internet expanses; they are generally managed by big anti-spam organizations (SURBL, Spamhaud), security companies (McAfee, TrendMicro), Internet Service Providers and corporate email server. The possible types of spam traps are typos (mistyped email addresses), expired addresses (not used for long time), purchased ( ...

Introduction

Weighing machines have long been used for measuring weights of various objects. The basic principle behind weight measurement is balancing of force due to gravity of an object with some known standard. You could easily find weight of small objects by using standard weighing balances having pair of pans i.e. one carrying the object to be weighed and the other is used to put loads of known weights until machine is balanced. This method cannot be applied on large scales involving heavy machinery, vehicles, or even humans. Another traditional method of weighing involves balancing force of an object due ...

Lab Experiment #4: Fundamentals of Electric Circuits

Goals The main objective of this laboratory practice is to gain understanding on the basic laws that describe electric circuits and their application.

Background and Theory

Ohm’s Law. According to Alexander and Sadiku (2013), “Ohm’s Law states that the voltage v across a resistor is directly proportional to the current i flowing through the resistor” (p. 31). The constant of proportionality is the element’s resistance, R, which depends on several factors that will not be analyzed in this report. The equation for Ohm’s Law is then: v=iR (where v: voltage, i: current and R: resistance). The units for ...

(DWB)

Application of Drone Technology to Facilitate Effective HIV Diagnostic and Treatment Services to Children in Rural Malawi

INGO UNICEF 1Broadway, New NY 10022 USA Dear Sir, Drones without Borders (DWB) is an organization which has been created to serve HIV vulnerable children in rural Malawi through a partnership with ZipLine Drones. Our organization seeks to develop and implement an four-months program aimed at ensuring fast and continuous delivery of HIV test kits, results, and antiretroviral drugs to provide immediate medical attention to HIV positive children in rural, cut off, hard to access, often combat zone areas in Malawi. The mortality rate of the infected children has been on the rise due to lack of access ...

The following is the critique of the research article titled: “Measuring the nursing workload per shift in the ICU”.

Research problem/purpose: The purpose of the study is to evaluate the differences in nursing workload between consecutive shifts, using a nursing workload measurement tool. The aim of the study is to measure the workload of nurses between two consecutive shift using the Nursing Activities Score (NAS). This study is designed to solve a common problem related to handling of nursing manpower in the ICU. The research is in line with existing knowledge about man power placement and workload. This research addresses an important issue pertinent to managing the global problem of nurses man power shortage and finding ways to ...

NAMEUNIVERSITY

Principle(s) In his book Comprehensive stress management, J. S. Greenberg highlighted several different theories about what causes stress and its effects on illness and disease (Greenberg, 2006).

Life- Events Theory was developed by Holmes and Rahe and this theory proposes 

that stress occurs when a situation requires more resources than there are available. For  instance, if you are taking a test for which you are unprepared, you may have stress. Some scholars have made lists of main stressful events in people`s lives. The rationale is the following: the more of these events a person experiences, the greater is the stress.DeLongis and her co-workers support this general position, but they think  ...

An injury suffered to the lower back may result in pain and the inability to function effectively which may ultimately affect overall performance especially for athletes. Core stabilization training is an effective therapy to such lower back injuries as it restores an individual’s ability to control and co-ordinate movement at the joints with little or no compensation (Pavin & Goncalves, 2010). Some of the current trends in core stabilization include mechanical modeling to determine the optimal physical conditions (load factor) necessary for spine stability (Pavin & Goncalves, 2010). It is meant to increase prevention and effective management of lumbopelvic dysfunction. ...

Introduction

The process of developing new products is a complicated and it involves many parties among them engineers. This paper shows the roles and issues we are to face as we design an improved bicycle. The paper presents the engineering characteristics followed by an evaluation of the design analysis using the weighted Pugh’s evaluation method and specifically for our project. It then goes on to elaborate on engineering analysis and design and their importance before concluding with an overview of the business considerations that are to be combined with the product design specifications (PDS) in the generation of the ...

The article talks about one of the most provocative and refreshing movements of 20th century, the age of avant-garde art — Dada. It starts with the flashback to the beginning of it all in 1920, when the war was over and different versions of avant-gardism were still spreading in the world, in Russia and Germany, and, of course, the center of it all was Paris. Tristan Tzara, the head of the Dada movement, was drawn to Paris to seek for attention and his plan was to create «Dadaglobe», an anthology of avant-garde art with a great number of contributions from ...

The principles of a Healthy Lifestyle are the Basics of Fitness

The principles of a healthy lifestyle lie in the basis of fitness. A proper nutrition, body care and personal hygiene, the regime of the day, giving up smoking and alcohol, positive attitude to the world and the manifestation of activity in everything - this is fitness in the broadest sense of this word. Maintaining a good shape requires a good sleep, balanced nutrition and physical workouts. Life in the style of fitness is impossible without a positive outlook. Without it, it is very difficult to give up lying on a sofa and other destructive habits (BistroMD).

Why Fitness is Important?

The aspiration to ...

Introduction

The current paper presents the proposal for the deployment of windows server in Contoso. The plan for the effective implementation and configuration for Windows Infrastructure is also enlightened. It is implied that the company possesses adequate capital for the effective deployment of the Windows network infrastructure due to which the proposal is focused to present the effective plan rather than incorporating the extreme cost efficient measures.

Features of Windows Server 2012

The features of Windows Server 2012, as inferred by Carvalho (2012), are discussed below:

Multi-server Support

A new and redesigned server is introduced in which cloud concept is incorporated so that server manager can manage ...

Application of Drone Technology to Facilitate an Effective HIV Diagnostic and Treatment Services to Children in Rural Malawi

Director, Grant Organization Technology to Save Children from HIV is an organization that has been created to serve HIV vulnerable children in rural Malawi through a partnership with ZipLine Drones and UNICEF. Our organization seeks to develop a program aimed at ensuring fast and continuous delivery of HIV test kits, results, and antiretroviral drugs to provide immediate medical attention to HIV positive children. We propose the application of drone technology to facilitate easy and convenient transport of HIV testing supplies, test samples, and medication that has been hampered by the poor state of transport infrastructure in rural Malawi. We ...

DC Power Supply

DC power supply is a significant element in most electronics and electrical work. Its main function is to supply a desired value of direct current to a specific load. It is imperative that the appropriate amount of DC power is supplied to electrical load for correct functioning without damage. As a consequence, DC power supply is significant in supplying the desired amount of direct current power. In this project, a 5 V DC switching power supply will be designed. The power supply will be designed to drive a 50 ohm load with less than 5 percent ...

The F-16 Fighting Falcon Lockheed Martin, the first multirole fighter of the US Air Force, is the most useful fighter jet in the world with more than two thousand units in service with the United States Air Force and two thousand operative aircraft in more than twenty-five countries. Entering service in 1978 became the first fighter purposely built to withstand twists 9-gravity force. The last of the 2,231 F-16s, the Air Force of the United States, was delivered in the first quarter of 2005, while the first dual-seat version, called F-16D, was approved by the United States of ...

Approximately 8 million healthcare workers in the U.S. are working in environments that place them at risk of exposure to hazardous drugs (Centers for Disease Control and Prevention, 2012). The risk to healthcare workers increases yearly as new non-antineoplastic pharmaceuticals are added to the National Institute for Occupational Safety and Health’s alert list of hazardous drugs (Connor, MacKenzie, DeBord, Trout & O’Callaghan, 2014). The addition of new hazardous drugs requires continually updating of procedures to prevent an increasing diverse range of potential exposures (Connor, et al., 2014). The purpose of this paper is to examine the study of ...

One of the major challenges facing healthcare administration is the problem of diversified care. The modern world and all the technological improvements that are found in medicine mean that levels of care are better than ever, but this is not without challenges for administrators. An increasing number of specializations in medicine, for example, mean that administrators must prepare for an increasing number of units and specialists, which in turn leads to problems with funding and human resources. There are also issues associated with the fact that patients are generally more aware of technological advances in medicine, and may be ...

Introduction

Dental implants are increasingly becoming popular because a large section of clinicians believe that natural tooth restoration techniques are inferior to dental implants as implants have a longer life than natural tooth and are less susceptible to biological changes. There are various types of dental implants that support crown, bridges, and dentures, and act as orthodontic anchors and facial prosthesis. The basis of the modern dental implant is a biological process in which titanium forms a bond with bone. Dental fixture is first implanted and then a prosthetic is added. Over the years, various implant impression techniques, such as ...

Summary

While all the components of a brake system are important, it is imperative to acknowledge that some components play significant roles in the system as compared to others. One such component is the brake pad. In most cases, the brake pad is referred to as the friction material. It is responsible for generating the friction which opposed the movement of the wheel thus causing a stop to the movement of the automotive. This report is aimed at selecting a section or component of the brake system and presents its modification. As a consequence, the report highlights and discusses the ...

Executive Summary

Storage, scalability, accessibility and security have always been the key problems faced by technology officers across industries ever since their operations have been made to run on enterprise platforms. With the progress made in the area of information and communication technology along with the development and popularity of social media and other data sources, the volume of data generated is huge, which every organization wants to exploit in order to arrive at meaningful intelligence that can help in growing their businesses. Storage of this huge amount of data, its retrieval and the associated costs are challenges for the organizations, ...

Physical versus spiritual flexibility in stewardship

In life, flexibility is an important aspect that is incorporated by individuals, professionals and corporations. For instance, stewards or leaders need to be both spiritually and physically flexible for them to deliver their services effectively to their followers. Physical flexibility of a steward refers to the ability of the individual to change location and still be able to administer their duties with efficacy. The steward needs to be able to adapt to various environments with ease and perform their duties optimally. On the other hand, spiritual flexibility refers ability of the stewards to perform their obligations under different forces ...

Downward communication is when information comes from the top of the hierarchy and is passed along to the bottom of the hierarchy. According to Daniel Katz and Robert L. Kahn, the types of messages passed through downward communication are job instructions, job rationales, procedures and practices, feedback, and indoctrination. These messages can be passed through staff meetings, internal newsletters, one-on-one meeting, bulletin boards, employee information sheet, e-mail and staff handbook. Each message is unique and should, therefore, be sent via the appropriate channel. For instance, if it is feedback being given to an individual employee, it would be appropriate ...

Abstract

The purpose of the paper is to assess the impact of Airbnb, the company that makes it possible for people from different countries to hand over their property to strangers, on the hotel industry. It is known that Airbnb is the third by cost value private IT-company in the world as its value is $25.5 billion. It is estimated that flow of orders of rooms for the night to Airbnb may increase from 79 million in the current year to 500 million over the next five years (and up to a billion within 10 years). In general, from a ...

Company Overview

Enbridge is primarily an energy delivering company, supplying energy across Canada and the U.S. It boasts of the biggest crude oil and liquids supply system worldwide. Other industry-related businesses of Enbridge include natural gas stocking, transmitting and midstream. It is also into generation of renewable and alternative energy, including solar, wind and geothermal energy (Enbridge, 2016). When stating its mission, Enbridge uses clear words, describing its core values of integrity, safety and respect. It lays stress on environment, health and safety, based on safety principles and life-saving norms by underlining these values. Informing about its 65 years old record ...

Summary of an Article

The test needs at least three samples; the first load sample burst at a consistent rate with the Test Method E8 to create fast fracture strength (FFS), geometrically (PFFS=Pc) (Kaminsky 783-786). The test has the primary reference data, specific load profile vary on the samples hardness within a scale of≥33HRC to 45HRC; >45HRC to 54HRC; and>54HRC. #/%Pmax/hrs is the symbol for incremental step load profile ("WITHDRAWN: Engineering Fracture Mechanics Special Issue—Mechanics Of Fracture And Failure In Geomaterials"). # represents some steps, and %Pmax gives the highest load anticipated by a single step.

The loading profile for≥33HRC to 45HRC is (10/5/2,4) or 10 steps at 5% of PFFS.

Specific load profile ...

Project Description

The current project aims to compare discussion forum models that are used for social activity to determine which can be used and are more preferred for learning management systems. Hashemyolia, Asmuni, Ayub & Daud (2015) have noted the increasing significance of web-based applications in learning management systems, especially in higher education. The emphasis on learning management systems is because it exploits autonomy and self-motivation in self-regulated learning. Learning management systems can be used for both course administration and pedagogical purposes (Pătruț, Pătruț & Cmeciu, 2013). This is possible because of the synchronous and asynchronous communication that is enabled by ...

Pallets are very useful in the shipping system because they play a crucial role in the movement of goods. They are critical in the supply chain because they connect the distributors, retailers, logistic service providers, and manufacturers. The use of the pallet system reduces the transport costs thus promoting the efficiency of the supply chain because palletized goods moved faster. Moreover, pallets reduce the amount of time that can be used to load manually and unload shipment thus increasing output. There are many considerations taken when deciding whether pallets are to be used for shipment of specific boxes or ...

1-2 Paragraph Response

Question- "Optimizing Performance"   In order to ensure the fault tolerant network design with no point of failure, administrators can use different approaches. One of them is redundancy. A network without a single point of failure should consist of redundant network-infrastructure components like routers and switches. Moreover, these devices should be interconnected with redundant links. Redundant components, paths and services can also be included in the network topology to ensure its high availability. Another approach is replication. It is a way of providing a couple of identical instances of the one system or one subsystem, directing tasks or requests to ...

Executive summary

In the construction of industrial establishments, the use of truss frames is a common practice. A factor that informs the use of steel elements in these structures is the fact that they allow for construction to be conducted swiftly while offering the required stiffness. This report indicates how new steel frames can be developed, informed by the realization that the previously used timber truss have deteriorated in quality. The predictions that old structures cannot withstand increasing wind loads also inform the new designs. In this report, the loads on the frames have been established to shed light on the ...

Electrical power in New Zealand is generated majorly from renewable energy sources such as wind, geothermal and hydropower. Renewable energy sources contribute 75% of the total power generated in the country. As a result, New Zealand has one of the greenest energy infrastructures in the world. Energy demand in the country has been steadily rising by an annual margin of 2.1% from 1974 to 2010. However, energy demand fell by a margin of 1.2% in the period spanning from 2010 to 2013. New Zealand is above average in global energy intensity ratings. However, it has also been ranked among ...

Business

Stakeholders Stakeholders are people or organizations who have an interest in or are affected by any policy or action of an organization. Stakeholders have a number of key characteristics. They may be characterized by their interest or stake in the company. They may also have the potential to contribute to the successful conduct of business for an organization. They can further be characterized by the decision making power they have on the activities of the company (Schmeer, 1999). Stakeholders in the case of PharmaCare are discussed in following paragraphs. Shareholders. The shareholders in PharmaCare would be interested in profits, ...