Testing Reports Samples For Students

- Stress in the Thin Cylinder Subjected to Internal Pressure
- Discussion on Lab Results
I would like to start with the proverb “Err is Human”. All the scientific experiments conducted in the research lab are always subjected to the errors. Most of the errors are due to the human mistakes while taking the reading, and it was called as the parallax errors. This report may contain the certain types of errors. Now, we can analysis about Table 1 and Table 2.
The table 1 speaks about pressure (N/MM 2) and gauge (ε). If a pressure increases the ...

Oil Prices: Breaks and Trends

The paper organized by the author also has an in-depth relationship with other literature works on the subject of Oil Breaks and Price Trends. Firstly, it has used the Kejriwal and Perron’s sequential procedure to determine the multiple structure changes in real oil prices. However, the author avoided the circular testing problem. In fact, the Kejriwal and Peron model allows the repeated use and selection of a number of breaks in the trend and in the level of a univariate time series without any prior knowledge as to whether the noise component is stationary or not. Thus, the author, in ...

Abstract

Three distinct variables were theorized and examined in the parameters on the outcome of the productivity of the lactase enzyme. The assessment of the temperature, substrate composition and the pH were reviewed in this experiment. The pH values were recorded over time. The effect of the pH on the lactase production in addition to the qualities of the substrate identity and the temperature were documented. In consideration of the findings of the experiment, it was discovered that a pH between 5 - 7 is the most suitable pH for the production of lactase. In this lab report, the works of ...

Abstract

Concrete acts as one of the most essential and cost-effective construction material made from a mixture of sand, cement, aggregates, and water. Cement acts as a binder for holding all the components together. Engineers working in the construction site must understand the purpose of the construction because different structures require different concrete strengths. The strength of cement paste used controls the overall strength of concrete that depends on the water-cement ratio. The following experiment was conducted to investigate different mechanical and physical properties of concrete.

Objective: To determine mechanical properties of concrete.

Materials used: Aggregate (coarse and fine), sand, cement, water, compressive machine, cylindrical and rectangular molds, timer, ...

Introduction:

The main purpose of the experiment was to carry out a tensile test on A36 steel and 6064-T6 aluminum. The experiment aimed at determining yield strength, rupture strength, ultimate tensile strength, the modulus of elasticity, the ductility of the materials under test. In real life engineering applications the tensile test is one of the most important and useful test that can be utilized to determine the mechanical properties of a material. Different materials have different mechanical properties and hence have different engineering uses.
In engineering, it is imperative to determine the mechanical properties of a material as it helps in determining ...

Introduction

In all moving parts of a machine, bearing failure forms one of the major causes of industrial breakdown for machines rotating at high or low speeds. The following paper provides a comparative analysis son the application of acoustic emission (EA) technique for condition monitoring of bearing element. The use of advanced signal processing and pattern recognition approach was established to monitor bearings conditions through automatic detection and diagnosis of localized defects in bearings. A short-time signal processing technique extracts two normalized and dimensionless features that establish linear discriminant functions used to detect defects on rollers of bearings and the outer race ( ...

The physical locations

Physical location is very important due to IT security needed by the hospital. Computer systems and the network must be protected at the physical level to avoid the sophisticated features that can harm their existence. Being the heart of the physical network the server room consists of the servers, cables, routers, switches and other key devices that can disadvantage the operations in the hospital if accessed by intruders. The hospital decided to choose a more secure physical location for the workstations and the servers. Good locks and electric fence will shun away third parties who may invade the workstation to ...

Introduction

For any company to be successful there is the need for the human resource department to take measures to reduce the impact of drug use in the workplace. One of these strategies is conducting random and regular drug checks for the workers in the company. According to the data provided by the department of labour in United States of America, employers suffer about 100 billion dollars in losses from problems associated with drug use at the workplace. The losses are incurred by low productivity of the workers, non-attendance, violence at the workplace, defiance and laziness at the workplace. The ...

Introduction

The destructive testing of the materials is often used to find out the material properties. The mechanical property is based on the parameters obtained from the material testing. The testing involves tensile testing, hardness testing, creep testing, and impact testing. The non destructive testing involves interaction of energy with the materials. It is necessary to decide the behaviour of the material by knowing the property of the materials. The structure of the material at the atomic level will guess the characteristic of the material at the atomic level. The materials fall into the category of metallic, ceramic, and polymeric. ...

a Course, College, country
b Course, College, country

Abstract

Tensile strength is a kind of force which is applied by pulling something such as rope, wire etc. to the point where it breaks [1]. The tensile strength of the material is the maximum amount of tensile stress that it can take before failure [1]. There is different kind of tensile strength yield strength, ultimate strength, breaking strength. The tensile strength can be found using tensile test which is a kind of the mechanical test [2]. Tensile test are simple, inexpensive and fully standardized. The motto of this paper is to analyze the tensile ...

Introduction

The topic of animal testing has been a debatable subject for quite a length of time. The determination of whether it is worth taking the life of an animal in a bid to treat any human disease has been surrounded by multiple ethical, social, legal as well as moral questions. The controversy between the arguments from both sides, those who support and those who oppose animal testing, has been aggravated by the fact that animal testing still remains a common practice in many laboratories across the world. The claims that some animals are similar to human beings have been proven wrong by several ...

Introduction 4

1. Traceroute with Pingplotter 4

Functional Description 4

Testing and screenshots of Traceroute 4
Conclusion on Network Tool 5
2. Angry IP Scanner used find that is using my network 6

Functional Description 6

Testing and screenshots of Angry IP Scanner 7
Conclusion on Network Tool 7
3. Wireshark 8

Functional Description 8

Testing and screenshots of Wireshark 9
Conclusion on Network Tool 10
4. Online Speed Test (Bandwidth Test) 10

Functional Description (Expectations, Reason Chosen) 10

Testing and screenshots of Bandwidth Test 11
Conclusion on Network Tool 12
Conclusion 13

Introduction

This paper investigates and analyzes a variety of Network Protocol Tools. For this purpose, the paper ...

<Institution>
- Foreword
- Company’s Problem:
I am delighted to present a report for TATA Motors on counterfeit motor parts. The increasing numbers of counterfeit motor parts has become a teething problem to TATA Motors international. This has resulted to reduced sales and a tarnished brand name.
- The assignment
This report offers a summary on how an investigation and analysis will be carried out to identify how such a problem can be dealt with. It delineates the process, and due meticulousness carried out to avert the manufacture and use of counterfeit motor parts.
- The ...

Abstract

Popper’s View on Science Applied to Management Theory

Introduction

Popper’s view on science disregards the induction, considering that theories must be submitted to experiments before considered scientific, otherwise things, if they cannot be experimented, theories are not scientific, but of other nature, such as metaphysical, and the philosopher aims to differentiate between the empirical science and the metaphysics (Corvi, 2005). This perception contributes to expanding human knowledge, because taking knowledge for granted determines scientific stagnation, while testing proven theories as falsifiable leads to further discovery and learning new theories, generating scientific advancement. Applied to management, Popper’s view ...

Software testing is defined as the process of executing software to determine its functionality. The goal is to demonstrate to the developers as well as the users that the software meets the technical and business requirements (Homè̀s, 2012). Standards on the other hands are documents outlining guidelines, specifications, characteristics, or requirements to ensure that products are consistent and meet their purpose. There are national and international standards that guide the development and testing processes for software. In Australia, the AS/NZS ISO/IEC 25062:2006 is a standard that provides User Interface (UI) designers or software usability professionals procedures for testing ...

Business Security Posture

Business Security Posture

Communication and Question for the Security manager

In the last two decades, information and communication technology has been greatly used in most businesses, organizations, and institutions for different purposes. Daily activities and business operations are implemented using information communication technology. For this reason, security management has become one of the priorities in businesses. Security managers are tasked with the role of ensuring security of data, information, and other organizational resources (Fox, Henning, Farrell & Miller, 2006).
The business security posture is the overall security plan, and the approach that the business takes to ensure security of data and information in the organization. It ...

Introduction

The implementation phase of any project plays a very important role in deploying the new system in the target environment. The supporting actions of this stage helps in preparing the system in readiness to be turned over to the maintenance personnel. Once this phase is accomplished, the system then enters the operations and maintenance phase which are the last phases of a system’s development life cycle. The implementation phase of any project is the real display of the defining moments that determine whether a system implementation is either successful or a failure. This stage is also defined as the system modifications stage. ...

Introduction and Background

In assessing the impact of microbes in the New South Wales (NSW) health system, it was discovered after laboratory testing evaluating Part A and B categories different types of colonies were discovered, for laboratory 1 evaluations. In laboratory 11specimens used in this experiment were blood, urine, cerebrospinal fluid; sputum, swabs from and

Mucous membranes.

Bacteria colony morphology:-. E Coli. This bacterium appeared to be creamy, shinny and rose to a level of 2-3 mm. M Luteus. This one was yellow shinny circular and rose to 1-2 mm. Fungal colony morphology; Saccharomytes cerevsaie ( yeast) and Aspergillus nidulans ( Mould ). Precautions must be taken while ...

Executive Summary

In this report we take a dive into the problem of returned goods and will create a plan in order to redesign the learning and development planning, which is looking to genuinely achieve no sale. There are different approaches applied, which are commonly related to the learning process and weightage.

The approach involves an experiment based approach where we observe the process, develop a conceptual learning framework and finally test with the manufactured unit samples.

The statistical sampling methodology tells us how to convert the data details into multiple sub-sized samples followed by a chi-square analysis and unit based selection to find the ...

Procedures for Managing Service Quality of TravelBurma App

The assessment of the service quality of TravelBurma App is critical for the business in order to find out and manage the quality that is being delivered to the customers against their expectations. TravelBurma App will use a comprehensive set of Service Quality Management procedures that will provide details about the overall superiority and quality of the services perceived by the customers. The fundamental service quality dimensions for TravelBurma App will be Reliability, Responsiveness, Assurance, Convenience, and Tangibility (which will involve facilities, accommodation, equipment, vehicle, and appearance).
The service quality of the application would be measured and assured through ...

I. Purpose

I hereby request the management for the standardization of the implementation process during system development in the sense that the system would operate efficiently and can be used effectively during production. The management have done exceptionally well in making the company a centre of innovation and excellence. Therefore, I believe that the management have the will and the power to make sure that the phase can be standardized as there is enough resources in terms of labour and capital.

II. Summary

In implementation process of a system is essential in avoiding handicaps in a product life cycle. “The five activities in the process are ...

Introduction

Field density testing is significant for assessing the soil properties of a site identified for a project. The assessment of soil property done through field density testing is aimed a verifying that the soil contained the required properties for the type of project to be constructed at the identified site (Thiers and Donovan 45). This lab uses the Sand Cone Method to verify the compaction of fill material and determine if the soil meet the required compaction with a design unit weight of 2,000 kg/m3. The aim of the experiment was to determine the dry unit weight, to ...

Computer based Horizontal prototype

The application developed in the following section, is meant for facebook users and takes care of the news feed manager and the users’ login page. It has a news feeds manager imbedded in facebook and a person the news feeds by a person are filtered according to the users’ needs. The user is first prompted to log into their facebook account and then their news feeds are filtered for them. Once the newsfeed has been filtered, they are arranged for them at the top of the page as shown in the preceding sections.

i. The user is prompted to enter his/her login ...

Report on Prisons and Contemporary Issues

Prisonner's Rights to DNA Testing

A person convicted of a crime would nonetheless lose his constitutional rights for freedom. The objective of court trials is to weigh the evidence that all parties have presented to justify arguments of innocence or guilt. A court trial is the best time for any accused to prove his innocence of a crime and he should maximize that opportunity to do his best to defend himself. However, trials are not just about facts and evidence it's also about possibilities. Possibilities that the accused is actually innocent, despite the evidence pointing at him. As soon as the ...

Introduction

Bend (flexure) testing is often done in springs as well in brittle materials whose behaviors of failure are linear like concrete, wood, plastic, glass and ceramics. Bend testing is suitable for evaluating the strength of brittle materials where the results of tensile tests aren’t easy to interpret due to the breaking of specimens around the gripping (Schoffstall, Charles, and Robert 234). In bend testing experiment, smooth rectangular specimens without notches are recommended under three or four point bend arrangements. Figure I below illustrates three point and four point bend arrangements respectively.
Figure 1. Bend testing of a smooth ...

Introduction

International research endeavors require data collection instruments in the forms of questionnaires. A questionnaire is research instrument, which consists of a series of questions intended to collect data from the respondents. The biggest challenge facing modern researchers is developing and implementing a questionnaire that is suitable for international respondents. Researchers have extensively worked on the field of questionnaire design in the 21st century due to high standards expected from the questionnaires (Blessing, Chakrabarti & Blessing, 2009, p.17). International standards for a research and questionnaire design affect the processes of data collection and analysis that are sometimes different from the researcher’s home country. ...

Report on Psychometric testing of the two new staff members (A and B)

Introduction
This report presents the result of the psychometric analysis of Mr. Anderson and Mrs. Beatrice, the two staff members who will be working together for the first time on the company’s brand new project. The two staff members will be expected to partner to deliver on the company’s new project which seeks to come up with a plan for venturing into a new market. The team is expected to conduct market research and determine a suitable new market for the company to begin its operations.
This report therefore focuses on aspects of the two staff members and ...

Innovation and Risk Management

Innovation and Risk Management

Introduction

This report aims at producing a strategic growth report for Apple Inc. Apple Inc is a telephony company that provides innovative products to suit customer’s needs. The innovativeness of Apple Company is a significant factor in steering its growth in the international market. The paper delivers the strategic growth plan in four parts. The first part is an overview of Apple Inc and why it is innovative. The second part contains the strategies that Apple can adopt to realize the proposed growth. Third is the components of New Product Development and how it can ...

This chapter consists of project testing and results as well as the problems faced during the project completion.

I2C Communication between Raspberry Pi and Arduino
After connecting the Raspberry Pi and the Arduino through I2C, the environment on the Raspberry Pi is set up. The Raspberry Pi identifies Arduino Uno by detecting the slave address sent by Arduino Uno. The slave address is set through the uploaded program code on the Arduino. The following test was conducted for testing the I2C bus between the Raspberry Pi and the Arduino. The address was set to 00×04. Below is the result when i2cdetect –y 1 is typed allowing the Raspberry Pi to detect the connected slaves through I2C.
...

Introduction about the Company

Honeywell is one of the globally leading US-based conglomerates, with earning revenue of $23.65 billion, as per 2001 available figures. It has numerous products, used in multiple areas of different industry segments and production facilities in all corners of the world. Aerospace is Honeywell’s leading industry segment where its experience of the line benefits the customers all around the world. Otherwise, Honeywell’s technology product range is quite varied. It is a leader in the manufacturing of technology products. Customers around the globe depend on Honeywell for its aerospace control technologies used in towers, houses and industry; automotive ...

Introduction

Dynamic testing has risen due to the growing dissatisfaction with the conventional and static tests in measuring mental functioning. The latter tests were limited to clinical and educational perceptions. The static and conventional examinations involve assessments that do not provide feedback while dynamic tests give a better evaluation of a child’s cognitive functioning (Resing and Elliot, 580). In dynamic experiments, the kids are provided with training, prompts, and feedback that assist them to show individual characteristics in the procedure of solving intellectual tasks. Wilma Resing and Julian Elliot adopt a study where they utilize dynamic testing to measure ...

Please nothe that while Wowessays.com offers a database of 100 free essays, you can still get a unique paper that no one has used from us.

Abstract of the Tensile Test

Tensile tests are instrumental in understanding the properties of various materials and the way will behave when subjected to a load. Four different materials were subjected to tensile test using universal testing machine. The materials that were tested were: steel and nylon. The data obtained from each experiment was used to calculate and graphically determine some of the valuable properties of the materials such as, yield stress, ultimate tensile strength and young’s modulus. The material properties obtained from the various test were compared with the theoretical values and also amongst the materials themselves. The tensile test results showed that ...

Procurement report:

Based on a case analysis of Nickelodeon

References 17

This report lays out methods of procurement which play a major factor in the process of planning for the client. It lays out procurement methodology, its classification and integration in both traditional and non-traditional methods of procurement. The report further avail points laid out in the Government of New South Wales that would assist a client in the selection of a method that’s most appropriate. Different options for procurement methods such as SWOT analysis, IFB, RFI, Design and Construct, and (EPC) Engineering, procurement and construction are presented. These constructs are availed, evaluated and explained putting ...

Abstract

Proper marketing is key to gain competitive advantage for a company. Management must put some efforts in maximizing available communication medium especially between and organization and its clients. Businesses especially should utilize the new technological schemes available since the world is gearing towards numerous technological advancements affecting the paradigm of conducting businesses. This paper proposes to create a Camping Site directory for the company as a one way of marketing the companies camping equipment products as well as gain alliances with partner companies. This paper also presents ways which the website could add to the profits of the company.

Abstract 2

Introduction 5
...

In the recent years, very many athletes in the different fields of sport have been found to be using drugs to enhance their performance. Well known athletes have tested positive for drugs that are used to enhance performance and other many instances have gone under without being reported. It is so disappointing in such cases where an athlete is seen to be doing very well in their sport and later on speculations on the use of performance-enhancing drugs or steroids arise. The most bothersome thing about the use of these drugs is that the users put their lives at ...

Planning the audit

This is usually the first step in any audit. It is important to have a plan for an audit so as to ensure that the audit will be effective. During the planning stage, the auditor collects information about the organization where they will perform the audit. Such information is usually obtained after the auditor has been contracted and they have a meeting with the organization. The meeting with the organization is very important for the auditor. The meeting provides an opportunity for the organization to communicate to the auditor what they exactly need from the audit. The organization will ...

When it comes to Human Resource Management, things tend to get a tad bit trickier considering how the HR department’s entire job is to maintain the upkeep of the people to ensure the upkeep of the facility. That being said, there are a few factors the HR department needs to consider before they can perfectly say that have done the best HR planning for the sports complex. For starters they need to make sure there are enough people doing the work and the maintenance of the facility is going as planned. Secondly, they need to make sure that ...

Introduction

Numerous electrical applications require an inverter, which converts Direct Current (DC) to Alternating Current (AC) power. Some of these applications require the stepping down of voltage levels when realizing this conversion, which signifies that the input DC power is greater than the AC power. Conversely, certain applications require the opposite: to step up voltage when performing the power conversion, which means that the input DC power is lower than the AC power. These requirements can be met through the use of Voltage Source Inverters and Current Source Inverters, respectively. However, some particular applications require to step down voltage for ...

- SWOT Analysis on the viability of upgrading to Windows 8
Windows 8 was released on October 26th 2012 and Microsoft made it increasingly easy for upgrading from previous operating systems including Windows 7, Vista and XP. Having an OS upgrade is termed a major step in staying abreast with the current offerings and solutions. However, the upgrade process requires a plan of execution to mitigate the risks involved in migrating to a new OS. Crescent Manufacturing Inc. is a leader in crafted and customized home furnishings. The company has a corporate headquarters located in Texas and two other manufacturing branches located in ...

The proposed system

The Swansea City is a small organisation that deals with history materials and adds up as a museum. There is a need to have an online library management system, which will enable the organization have their services online. This is a growing trend that is picking up for most organisations. This paper will focus on the functional requirements of the proposed system, the non-functional requirements, and the way the system will work and operate. These are important details that will enable the system developers come with a working system.

Functional requirements

One of the functional requirements of the new system is that it should have a database ...

Introduction

Data migration entails the procedures involved in the transfer of data between types of storage, format types as well as computer based systems as a major consideration in the implementation of systems, their upgrade or consolidation. Data migration is normally performed in a programmatic manner so as to attain automation in migration so as to free up human resources from taxing tasks (Sudipto. et al. 2010). Data migration may be undertaken for several reasons such as replacement of upgrade of server and storage equipment, consolidation of website platforms, maintaining of servers as well as relocation of data centers when the need ...

FIDIC stands for Federation International des Ingenieurs Conseils (International Federation of Consulting Engineers). It was founded in the year 1913 in Europe, and now has 60 countries as members. The Secretariat is situated in Switzerland. The FIDIC form of contract has evolved over a period. The contract conditions are equally suitable for use on domestic contract. In September 1999, FIDIC published four new editions of the forms of contract. They are complete replacement of old forms.

Conditions of Contract for construction: (Red logo).

Conditions of Contract for Plant and Design-Build: (Yellow logo).
Conditions of Contract for EPC/Turnkey projects:(grey logo).
Short Form of Contract: (Green ...

Abstract

Bridges are the most complicated structures to design in the Engineering field. The following experiment conducted using spaghetti and any type of glue in building a bridge model. The experiment involved testing how much weight can the spaghetti hold in tensile using a tensile strength testing machine. The experiment aimed at making a practical representation of real bridges and the forces on them. Three main real bridges are discussed, truss bridge, srch bridge, and suspension bridge. The tests were conducted through hanging weights on the constructed spagheti bridge and determining the breaking loads. The experiment result analysis showed that truss pattern brigdes ...

Motivation and Growth of Systems Development Professionals

A company that knows how to treat its workforce properly ends up with happy, satisfied, and loyal employees regardless of whatever industry they belong to. The information technology field is highly predisposed to flighty employees, thus, keeping them motivated and positive is always a challenge. As companies scramble to hire the best systems development professionals such as quality assurance testers, systems engineers, systems analysts, and programmers, among others, these IT professionals keep themselves updated with the trends in the industry and upgrade their skills as well. Thus, the key to maintaining the best systems development professionals is to keep them ...

Business Opportunity Analysis

EXECUTIVE SUMMARY
The following report is a business opportunity analysis for AtlanTech Resources Limited, for the purposes of determining the feasibility of lowbush blueberry moisture sensors as a viable addition to our family of products. Given the decreasing rate of sales that exists currently within the company (8% annual decrease), a new product must be released in the next three years to sustain the viability of our current business model; this report discusses the viability of the lowbush blueberry moisture sensor in fulfilling that role.
The existing market research and need for the product is established, as well as the ...

International Olympic Committee Ethical Issues

Background
One of the most recent scandals occupying the headlines of the international print and social media is the doping scandal, surrounding the Russian Olympic and Paralympic Team and the participation of the athletes in the Olympic Games in Rio this August. The Games have started and it is evident that the International Olympic Committee (IOC) along with Independent Committee and Brazilian Authorities took the decision not to ban the team from participation, causing dual and controversial response from the international community. The organization in a focus of the scandal is the IOC, heavily criticized for the way it ...

Lab report

Abstract
The objective of this experiment was to determine the influence of phase transformation on the microstructure and mechanical properties of plain carbon steel type AISI C1045. The testing of metals is necessary to learn what metal is suitable for construction of a specific item by testing how microstructures react during phase transformations. The metal used during the experiments was samples of AISI C1045 Steel also called carbon steel alloy. The samples each underwent tests for Heat Energy (ft-lb) and Hardness (HRC) at five temperatures; 70°F (assumed to be room temperature, 400°F, 700°F, 1000°F and ...

Introduction

Reputable companies in the business world are constantly involved in the innovation of products that they manufacture. Such companies frequently introduce new products, modify the existing products, or improve the already existing products. All these activities are done to fulfill the needs and desires of customers. The whole process of conceptualizing, designing, manufacturing, and selling a product is called product development. One prominent company that is involved in product development is the Apple Inc.
Apple Inc. is one of the most reputable companies in the world. The company was established in 1976 by three like-minded persons. The three persons ...

Chapter overview:

Chapter Title: Wall Street

Citation Style: MLA Seventh Edition

Report:
Basic Definition: Wall Street is the money related capital of the cutting edge world and shockingly has gotten to be known as a position of medications and dishonest conduct. The general population has started to understand that the conditions that persevere in the current regular workings on this one piece in New York City are frequently exploitative and unethical.
Analysis: Occupy Wall Street was a development to uncover some of these untrustworthy practices. The Occupy defenders need a more fair and good appropriation of riches in America. Congress has been ensnared in adding to ...

Group

Abstract
Material selection is an important stage in engineering design. Engineers use various materials with different mechanical properties in building of structures. These mechanical properties include; tensile strength, yield strength, proof stress, Young's modulus, shears modulus of rigidity and ductility amongst others. Material selection increases the performance as well as durability of the engineering component. The expected life, cost, nature of loading and working environment are some of the factors that assist engineers to select materials for particular application. Therefore, engineers and designers must be able to determine the properties of these materials before they use them. Engineers ...

Version control systems

Introduction
There are different version control systems which have been developed to be used in managing software development projects. The choice of the version control will depend on the model and the workflow of the projects and the nature of organizational workflow that is supported. It is important to understand the requirements of the organization which will use the version control. This will determine the way the version control will suit and align with the goals of the developers. Before a choice is made, it is important to have clear view of the requirements of the organization. This paper ...

Introduction

Investment and risk are the two sides of a same picture, and there are no two ways to find the close relationship of both of these variables in a perfect manner (Anderson & Styan, 1990). The tradeoff of investment and risk is highly effective for an investor, because an investor would be more cautious about the association and addressing of risk, rather than of yield. Risk or deviation can also be termed as volatility in the field of finance, and the computation related to the same would be extremely critical.
During the current global financial crisis (GFC), there were numerous indexes ...

Project Title/ Home Automation System/

B. Eng Electronics Engineering
Southampton Solent University
B. Eng (Hons) Electronic Engineering

Project Title: Home Automation Systems

The automation plays a vital role in saving human effect and providing accuracy in its operation. Automation can be done in many ways; it’s a real challenge to choose a most suitable system for a particular application. The Raspberry Pi and Z wave technology used in the home automation system helps to save energy, time and ensures security of the home.
- Detail Specifications
In this project we are going to use raspberry pi board, Z- wave card, Z- wave appliance plugs/switches/thermostat/sensor/remote control and mobile application. ...

A location finder application is a computer program that supports the search of specific zones as input by the program user. The program uses a set of instructions which detect the location settings of any end device user that has a mobile phone. Preferably, the location finder application is expected to operate at an optimal level in high end devices like smartphones and tablets.

Objective

The objective of the project is to carry out the creation of mobile application software which assists in the location finding based on one’s geographical location. This will be aided by a framework of mobile networking through provision ...

Abstract

This report is a detailed summary of a stock market analysis. A sample of stock price indices in the year 2012 have been selected from Amsterdam, Frankfurt, London, Hong Kong, Japan, Singapore and New York stock markets. The inspiration for this project is to provide a statistical analysis on the performance of stock prices in these markets by assessing their trends and performance in a period of one year.
In general, the findings on market trends shall enable investors to predict future strong economies among the seven selected markets. This project shall major on regression analysis and Microsoft Excel, as basic tools for ...

Report on Capstone Simulation Round 1

- Authorized Software Policy

Type of software permitted for use by employees: Approved software

Software evaluation frequency in months: 6
Violation penalties: Focus on warnings
- Backup RAID levels: 0

Remote backup spending: $ 250,000

- Database Security
Frequency of forcing password changes in days: 15Degree of separation of roles for admin and operator roles: CompleteControl privileges: RestrictedOS services and associated ports: EnableDatabase honeypots: Enable
- Remote Access Policy
- Systems Development Testing

Intensity of quality assurance testing: HighDegree of reliance on external vendor: Comprehensive testing

- Training

Training by funding: $50,000

- Training and Auditing
Frequency of physical audits of the equipment: Every six monthsFocus on training area: network vulnerabilities 25%Focus on training area: controls 25%Focus on training area: encryption 25%Focus ...

Summary 3

Description of the field 3
Areas of specialization 3
Job prospects 4
Where electrical engineers can work 4
Expected salary ranges 4
Duties and responsibilities of electrical engineers 4
Courses needed in high school to pursue Electrical Engineering 5

Works cited 6

Summary
Electrical engineers deal in the development, design, testing and operation of electrical and electronic machines, equipment and systems. In order for one to become an electrical engineer, they need to obtain good scores in mathematics and sciences at high school level. Afterwards, they can enroll for a bachelor’s course in electrical/electronic engineering ...

Introduction

Planning is an important part of artificial intelligence. There have been various approaches which have been devised in this field. Planning is a way in which transition systems are undertaken. There has been the quest to solve the problem at hand. There have been contributions by various scholars in the quest to improve on the previous researches that have been devised for this issue.
Planning is an important process in finding for solution to a given problem. It is an area in Artificial Intelligence which has helped to find solution to a given problem. There is a need to have a way in ...

Sand can be classified into coarse sand and fine sand, based on particle size. The former is usually greater than 4.75 mm (retained in a No. 4 sieve), while the latter is less than 4.75 mm (passing through the No. 4 sieve) (1).The properties, including shape and texture, size gradation, moisture content, specific gravity, reactivity, soundness, and bulk unit weight, of different types of sand,influence concrete strength (2). The shape of sand particlescauses variations in the surface to volume ratio, and a larger surface to volume ratio improves bond characteristics but decreases concrete workability. The surface texture of sand ...

Reflection

System design is an important aspect of the automation process. There are many considerations that should be put in place in order to arrive at a particular screen and design. There is a need to ensure that the system requirements for the system meet what the client requires. The user interface should be friendly for the city residents including special groups such as the old and the elderly generation. User interface prototyping is an interactive technique involving user to actively mock-up the user interface of a system. The process will start with the identification and representation of GUI development tools that are ...