Essays on Electron

Abstract

The study of tiny particles and their applications have emerged as an important area of research in recent years. In particular, magnetic nanoparticles have attracted considerable attention due to their unique properties that make the particles useful in numerous applications. Accordingly, the present review investigates the synthesis, characterization, and biomedical applications of magnetic nanoparticles. The introduction section examines recent advances in nanotechnology and explains the significance of magnetic nanoparticles in scientific research. The section on results and discussion presents the findings of various researchers with a focus on the magnetic properties, synthesis, characterization, and biomedical applications of magnetic nanoparticles. ...

Raman spectroscopy is dependent on scattering of light. When light interacts with matter, energy exchange can take place through absorption, simulated emission, Raman scattering or spontaneous emission. In Raman scattering, the emitted photons have less energy and lower frequency in comparison with the absorbed photons. Some energy of the emitted photons is transferred to the molecules. Raman spectroscopy is a method which collects the chemical fingerprints associated with molecules. Every molecule has different levels of vibrational energy and the emitted photons experience shift in their wavelengths. The wavelength shifts are collected,examined and analyzed for sample identification. Raman spectroscopy ...

Abstract

The field of Nanoscience has evolved due to the other advancements in the other fields of study such as the Nanotechnology. While the latter is a subset of the former, there is credible evidence that points to the fact that Nanotechnology has been developed thanks to various areas such as biology, material science, engineering physics, chemistry and much more. It is the foundation on which the Magnetic Nanoparticles have been embedded. MNP is nanoparticle that has the magnetic manipulation ability. Thus, this paper focuses on the study of the Magnetic Nanoparticles especially how they are formed or synthesized and ...

Introduction:

Nanobiotechnology serves as an imperative technique in the development of clean, nontoxic, and eco-friendly procedures for the synthesis and congregation of metal NPs having the intrinsic ability to reduce metals by specific metabolic pathways. Silver nanoparticles are particularly interesting nanoscale systems due to the ease with which they can be synthesised and modified chemically. Synthesis of silver nanoparticles has been widely researched due to their interesting size and shape-dependent properties [26]. These novel properties can be tailored by controlling their size, shape, composition, structure and crystallinity. Due to their size features and advantages over available anti-microbial properties, chemical imaging ...

Gold Nanoparticles Article Summaries.

Original Article Summary: Turkevich, Stevenson, & Hillier, 1951. In their 1951 article, Turkevich, Stevenson, and Hillier explore the nucleation processes and growth of colloidal gold nanoparticles during synthesis under different methods. The paper explores the standard preparation methods of colloidal gold which all use a nucleating agent which usually comprises reducing agents that later form a mixed polymer with a chloroauric ion before reduction to the nucleus occurs. The authors of this paper explore gold colloids synthesis methods such as Bredig’s electrical arc synthesis, the Faraday method, and reduction methods using acetone, tannin gold solution, oxalic acid, Hydroxylamine hydrochloride, ...

Iridium organometallic complexes

Introduction Iridium organometallic complexes are applied as catalysts, light-emitting diodes, dye-sensitized solar cells, and luminescent agents for cells imaging.1 Due to the wide application area, the scientists perform research on preparation, characterization and physical and chemical properties of iridium organometallic complexes.

The oxidation state in complex compound refers to the charge of the metal, which it would have in a simple ionic compound. The configuration of d-orbitals (dn) indicates the number of valence electrons in free metal of the same oxidation state. The iridium electronic configuration is [Xe] 4f145d76s2, yet the s-electrons transfer to d-orbital to form 5d9. The ...

Barbara McClintock was a one time student at Cornell University under the auspices of one C. B. Hutchison, who was lecturing in genetics during the fall in 1921. Genetics had not become a widely accepted course during the time, and students used to study it as a preamble to becoming plant breeders. Having been born in Hartford Connecticut in 1902, she earned her first degree in 1923, her Masters in 1925 and a Doctorate in Philosophy in 1927. Her steady rise as a geneticist was inspired by C. B. Hutchison. She studied the genetic characteristics of maize concentrating on ...

Cellular respiration equation:

C6H12O6+6O2→6CO2+6H2O+38ATP. Glucose+Oxygen→Carbon dioxide+Water+38ATP.

Photosynthesis equation:

6CO2+6H2O+sunlight, nutrients→C6H12O6+6O2. Carbon dioxide+Water→Glucose+Oxygen. Respiration and photosynthesis are opposite processes. It means that products of cellular respiration are reactants of photosynthesis and vice versa: the products of photosynthesis are reactants for cellular respiration. It is known that plants are autotrophs. Thus, they have to realize cellular respiration because they need energy for their existence. Due to cellular respiration, they receive energy, which is used to make organic compounds (glucose) and oxygen during photosynthesis. From the other side, people are heterotrophs. They ...

Abstract

This examination paper acknowledges the spectacular diversity of reproductive adaptations for survival of various categories of land plants. It describes a typical life cycle of a land plant that reproduces via spores. It also identifies the different parts of Plant organs and their functions such as cell organelles, parts of a land plant, and epidermal cells. A microscope is an important tool for examination of biological specimens, including cell’s internal structures called organelle and is important in magnifying the focused area. Plants are classified into four main groups, namely, ferns, mosses, flowering and confers. This paper finds that ...

Introduction

There are different perspectives that are being peddled concerning fracture processes, this has led to confusion on what actually this term means. In this review, a deeper understanding is sort by analyzing different aspects of the nomenclature of the fracture process. In order to gain a deeper understanding of the failure processes several aspects are put in consideration key among them will be discussed below and include; the energy of fracture, macroscopic structure path and microscopic fracture mechanisms.

Energy to Break

The toughness of a material is the measure of the absorbed energy during and before fracture. The toughness of the material ...

1. a. The pKa value of an amino acid is an indication of how strong or weak an amino acid is, based on the said acid’s dissociation constant. An amino acid that has a high pKa value is weaker than on that has a low pka value. Given that an acid’s dissociation constant is Ka, the pKa value is given by the formula: pKa = -log10Ka pH = pKa + log ([A-]/[HA]),It follows that for Cys12, 7.4= 7.2 + log([Cys-]/[HCys]) 7.4-7.2 = log([Cys-]/[HCys]) 0.2 = log([Cys-]/[HCys]) 100.2= Cys-/HCys Therefore, Cys-/HCys = 10-4Similarly, ...

The periodic table of elements, by far, stands among the most notable discoveries in the history of chemistry. Nowadays, probably everyone who has ever heard about chemistry heard about the periodic table of elements. Its implications on the scientific world are so enormous that it has even leaked out to the general public and have become associated with the chemistry itself. This is not surprising considering the scientific strength of this instrument. Using the periodic table, many characteristic properties of the elements can be predicted and many phenomena can be explained. This discovery put so much scientific knowledge together, ...

Acids

There are three scientifically correct definitions that define an acid substance. Arrhenius defines an acid as a substance that made up of hydrogen that when dissolved in water breaks apart increasing the concentration of hydrogen ions (H+) in the water. Bronsted-Lowry defines an acid as a proton (H+ ion) donor. Lewis describes acids as substances that accept electron pairs. Acids have a sour taste and are highly reactive with metals (Brent, 2009). Nitric acid is used as fertilizers, and hydrochloric acid is used to bricks.

Bases

A basic substance can also be described using definitions from the three authors. Arrhenius ...

Polymers cells are the next-generation class of photovoltaic since they promise realization of light weights, mechanically flexible, larger area devices. The room temperature solution processing can be used in fabricating these devices. High-efficiency conversion power of about 10% has recently been obtained in tandem polymer cells (Huo et al., 2015). In single-junction, it’s achievable through lowering the density state to a level lower than the electron acceptor and the conduction band of the semi-conductor. Photovoltage is electromotive force obtained by a photosensitive material due to inducing radiant energy; photovoltaic relates electric current produced at a junction of two ...

Use of Fossil Fuels for Power Generation and the Need for Renewable Energy

According to Nelson (2011), more than 85% of the world’s energy consumption, which is estimated at 520 exajoules, is generated through the burning of fossil fuels such as petroleum, natural gas and coal (p.19). Electric power generation from non-renewable sources will, unequivocally, result in their exhaustion and creation of a major energy crisis. For this reason, it appears primordial to shift in a greater scale to alternate power generation, such as solar, wind, hydroelectric, etc. Amongst these, Sorensen (2011) explains that though hydroelectric power does represent one of the major forms of power generation, its growth is stagnant ...

Microbial fuel cells are devices that employ bacterial or other microbial cells to generate electricity (Singh, Pratap, Baranwal, Kumar and Chaudhary, 2010). Cells generally carry out electron transfer and oxidation-reduction reactions during normal metabolic activities. Electrons generated during these reactions can be made to flow through an external circuit to generate current. Fig 1. Depicts a typical MFC. The anodic compartment consists of microbial culture in glucose or other medium (Singh et al, 2010). Wastewater can also be used as a substrate source for microbes in a MFC intended for effluent treatment application. The microbial cells breakdown complex substrates ...

Introduction

Cellular respiration and photosynthesis are vital reactions in living organisms since without the two; there would be no life on earth. Cellular respiration involves a set of metabolic reactions that take place in cells of living organisms thereby converting nutrients like sugar into adenosine triphosphate (ATP) (Osterhoudt & Barhydt, 2010). On the other hand, photosynthesis involves the conversion of carbon dioxide into organic compounds by the photoautotroph in the presence of sunlight. Most animals attain their energy requirements through cellular respiration while on the other hand; photosynthesis is performed by most plants that can make their food. These two reactions ...

The objective of this experiment was to get acquainted and study galvanic cells, Nernst equation, and electrochemical reactions and determine the experimental value for the Ecell vs. log Q for Cu/Zn cell. Galvanic cells are the systems which can produce electric current due to reactions occurring in them. In our common understanding these cells are the batteries. In these cells, the processes of electron transfer and corresponding chemical reactions occur due to the difference in tendency of different substances to gain electrons. The galvanic cell typically consists of two half-cells and a junction between them which is often a ...

Question 1:

Ernest Rutherford is sometimes referred to as the “Father of Radioactivity”. Rutherford made many contributions to research into radioactivity and the nature of an atom. Outline his contributions. Rutherford contributed greatly towards the experimenting, studying and understanding of radioactivity, and the atom. His initial contribution was the discovery and definition of the electron. The Nobel laureate proposed the Rutherford atom model that replaced the Thompson model. This provided an excellent basis for future work into the studying of atoms, as well as, their physical and chemical properties. He was involved in research aimed at splitting the atom leading to ...

Health abnormlities of several kind require a thorough assessment in terms of management. With the technical advancements, medical field had evolved to simplify the complex assesssment tasks. For instance, medical imaging has come up to make feasible the analyis of body parts through the production of images. There is a need to know much about this particualr area. In such context, the present description deals with a topic Magentic Resonance Angiography (MRA) of the remal artery with a special emphasis on the 3D gradient echo sequencing in MRI. Briefly, magnetic resoannce angiography constitutes a kind of MRI (magnetic resonance ...

Scanning electron microscope uses a beam of electrons to form images that reveal the topography and composition of a body. Before being focused on the object, incident electrons have high amounts of kinetic energy. Incident electrons interact with the surface of the specimen, and this interaction is determined by the rate of the acceleration of the incident electrons. Energetic electrons are usually released from the surface of the sample when the incident electrons come into contact with it. The interaction results in the formation of scatter patterns that interpret into the shape, composition, size, and texture of the specimen. ...

Introduction

The Anti-Markovnikov process in organic chemistry generally involves addition reaction method of an electrophilic substituent, HX to an alkene or alkyne compounds, in such a way that the Hydrogen atom in the HX electrophile are chemically bonded to the carbon atom containing the least amount of Hydrogen attached to it. This addition process commonly uses catalysts or additive compounds in order to hasten the reaction since the process is quite expensive and toxic in nature. Furthermore, there is also a limited number of reactions involved in using the Anti-Markovnikov addition, making its research more difficult to expand and develop.

Anti-Markovnikov Addition of Alkoxides to Alkynes

...

Sodium

Sodium is an element found in Group I of periodic table according to WebElements Periodic Table of the Elements (n.p), commonly known as the Alkali metals. It is a metal with silver-white color appearance. It is usually found in many different minerals like cryolite, zeolite and amphibole. The most common mineral where it is found is sodium chloride. Sodium is the sixth abundant element in found in earth’s crust. It has an atomic symbol of Na and an atomic number of 11. The atomic mass is 22.98977 and atomic radius is 186pm. Sodium is a very reactive metal. ...

Introduction:

Transmission electron microscope (TEM) is the type of a microscope that uses a beam of electron rather than visible light to illuminate the specimen. Besides, while light microscope uses glass lens to focus light to the specimen, TEM uses electromagnetic lenses for focusing of the electron beam. TEM has a higher resolving power than the light microscope because the electron beam it uses for illumination has a much lower wavelength than visible light. During the operation of TEM, some electrons passing through the specimen get scattered and disappear from the beam. However, the unscattered electrons reach a fluorescence screen ...

Chemistry

2. The nano carrier needs to remain in suspension in H2O, PBS, human serum, etc. What type of polymer do you need to use to decorate the surface of the nanocarrier to achieve this goal? In order to maintain the nanocarrier in suspension in water, Phosphate-Buffered Saline (PBS), human serum a suitable solution a polymer is needed on its surface. The polymer used needs to accomplish three goals. The polymer needs to decorate the nanocarrier surface to enhance suspension and secondly, to prevent protein absorption. Another characteristic is that the polymer evades the immune system. PLGA poly(lactic-co-)glycolic ...

Group 1 elements are referred to as alkali metals because they form oxides and hydroxides that dissolve in water producing alkaline solutions. They have one electron in their outer shell that they lose by oxidation to form ions; Na Na+ + e- that is more stable (Schwerdtfeger et al. 7520). As one move down the group 1, the elements atom gets larger as the outer shell electron get easily lost and its radius is governed by the number of layers of electrons around a nucleus and the pull of outer electrons feel from the nucleus, therefore group one element get more ...

Biology Assignment

- Cellular respiration is the metabolic process through which glucose is broken down in the cells to produce energy in the form of ATP. Anaerobic respiration or glycolysis is the anaerobic breakdown of glucose into ATP, which requires no oxygen. This process involves removal of hydrogen and electrons from glucose to generate NADH, pyruvate and energy equivalent to two molecules of ATP. In the absence of oxygen pyruvate undergoes fermentation, whereas in the presence of oxygen, pyruvate is siphoned into the mitochondria and is completely broken down. The citric acid cycle occurs in the matrix of the mitochondria and ...

- Describe two features that make all enzymes catalysts.

Enzymes are catalysts that increase the rate of reaction between substances and remain unchanged in the reaction. Enzymes are vital to several bodily functions and make possible such processes like metabolism and catabolism. Two features that make enzymes catalysts is their ability to lower the activation energy and their inherent tendency to combine with coenzymes and cofactors. Activation energy is the minimum energy required to activate the molecules of reactants in order to initiate a chemical reaction. Some substrates have high activation energies that would need very high temperatures to activate ...

1. Introduction

During early days people do physical work to complete a job. The physical work made by the people made them tired and people time gets wasted. Let us take a construction work. The construction works involves major labors to construct a building, in early days people spends major time to construct a building. The labors have to give more energy to construct the building. Some of the labors even sacrificed their life by accident case inside the building. But today’s technology makes sure that the construction of any type of building can be modeled and executed within a year. Labor also ...

Question #1

Three main layers of the interior of the Sun are convection zone, radiation zone and the core.The central part of the Sun with a radius of about 150-175 thousand km (ie, 20-25% of the radius of the Sun), in which are thermonuclear reactions, called a solar core. The density of material in the core is about 150 000 kg / m ³ (150 times higher than the density of water and ~ 6.6 times higher than the density of the densest metal on the Earth - osmium), and the temperature in the center of the core is over 14 million K. A ...

Q1. Describe the three main layers of the Sun’s interior.

The three main layers of the Sun’s interior are the core, the radiative envelope and the connective envelope.

The core is the center of the Sun, with a density of 150 g/cc and a temperature of 15 million K. This is the region where high energy fusion reactions take place and energy is produced. The energy produced is mainly in the form neutrino and gamma rays, which are actually high energy protons which travel several light years and supply energy to the Earth and other planets. The energy produced in the core then radiates outwards through the radiative zone. The ...

Living organisms depend on biochemistry to power various chemical reaction cycles which are important for the overall biological functioning of an organism. Chemical reactions occur at a specific rate in certain conditions and require input energy (activation energy) to be supplied before a reaction can begin. Since a reaction cycle consist of many consecutive step, slowing one step slows down the whole cycle. Enzymes are proteins which act as catalysts in biochemical reactions and speeds up reactions to rates that are high enough for biological functioning. Enzymes manage this by providing an alternative reaction route with lower activation energy.

The breakdown of ...

Report on Case 1: Diagnosis of Hereditary Fructose Intolerance

Enzymes act as biological catalysts, they speed up biological reactions and are also capable of regulation. Enzymatic reactions can be anabolic – where a new substance is built from smaller ones; or catabolic – where a substance is broken down to yield simpler molecules. In the example of fructose, enzymes catabolize this simple sugar to substances that are intermediates of the glycolytic pathway, allowing fructose, a 6-carbon sugar, to be used by cells to obtain energy in a way similar to glucose (also a 6-varbon sugar). Aldolase B is one of the enzymes involved in the catabolism of fructose, and its deficiency results in ...

Introduction

Photosynthesis and cellular respiration are very important processes. This paper highlights these two processes by giving an in-depth explanation of how these processes occur, where they occur, their importance, and the equations. The paper starts with the photosynthesis process as it answers the guiding questions, and ends with the cellular respiration process. Photosynthesis is the process of conversion of light energy into chemical energy and then storing it in sugar bonds. It occurs in plants and algae of the kingdom Protista. Photosynthesis is a process whereby the green plants utilize energy from the sun to convert water, carbon ...

Chapter 3 Atoms and the Periodic Table

For centuries, many have tried to learn about the smallest particle. As far as 2500 years ago, Democritus and Leucippus created an idea for the atom and called it ‘atmos’ meaning indivisible. Various philosophers and scientists have proposed models for what and how the atom should be. The initial theory proposed by Dalton in 1803 states that atoms are indivisible and that all atoms of a particular material are identical. He also stated that atoms of different materials join to form compounds. J.J. Thompson proposed the initial model of the atom. It is called the plum pudding model. He theorized ...

Abstract

Recently, attention has been diverted to clean, alternative and renewable technologies due to the depletion of petroleum resources and increase of the green house gases from the combustion of fuel resources. Fuel cell is the fore-runner of these technologies and has received immense impetus due to its relatively clean source of energy. Fuel-cells are devices that produce electrical energy from chemical transformation reactions. Electrodes are placed within an electrolyte medium that facilitates oxidation of fuel. In these electrochemical reactions, ions are generated that generate electricity. This electrical energy can be effectively harnessed to carry out a myriad of functions. Since ...

- Introduction A compound light microscope represents two or more lens. The term compound refers to multiple or mixture. In compound light microscope built with binocular lens and objective lens. The binocular lens present near the eyepiece and objective leans near to nosepiece. The objective lens helps in enlargement of images and also to collect the light source. According to the requirement the objective lens also changes. In advanced compound light microscope the phase contrasts also possible. In earlier 1595 Zacharias Janssen invented the first light microscope using collapsing tubes. It produced a magnification of 9x. Now the magnification ...

Abstract

All cells in a living organism require energy to drive various cellular activities such as transport of molecules and movement among others. The rate of cellular respiration may be affected by the substrate concentration, pH level and enzyme concentration among other factors. This experiment aimed to study the rate of cellular respiration in isolated mitochondria under different conditions. It was hypothesized that if the concentration of the substrate is increased then there will be an increase in the rate of cellular respiration. Mitochondrial suspension was used as the source of succinate that was used as the substrate. The level of ...

Abstract

Studies in mechanics have evolved to be the most fundamental tool in the innovation of new materials and advanced technology. Specifically, studies in Continuum Mechanics, has been very influential in producing materials that exhibit various desirable characteristics at the expense of size and weight. Nanotubes are a perfect example of how this study has impacted the evolution in material technology. It has been used as the basis for the explanation of these complex materials as well as provisions for their behavioral effects during machining. The wide use of nanotubes in fragile fields like technical textile supplements, truly depict the stretchy ...

Aim of the experiment

Apparatus Spectrometer, sodium vapor lamp, mercury vapor lamp, watch maker eye glass and small flash lights. Abstract This is the phenomenon where atoms are excited and emit light of various wavelengths. These lines which are colored with dark fringes between them are known as atomic spectra. All elements have distinct set of spectral lines. It is this unique spectrum associated with certain distinct element. The atomic spectra of various elements of investigation will be studied in this experiment using a diffraction grating mounted on a spectrometer. The atomic transitions of various elements under investigation will be used to ...

Instrumentation

Advantages and disadvantages of different types of photomultiplier tubes (PMT) in the context of the gamma camera Tubes with GaP(Cs) The Tubes with GaP(Cs) is an example of a PMT. Fliyckt and Marmonier (2009) state that one of its advantages as the high secondary emission coefficient of the GaP(Cs) which enables it to reduce the unexpected fluctuations of gain in most PMTs and therefore, improving the energy resolution. This is especially beneficial for light pulses that can allow the cathode produce only a few electrons. Since the GaP(Cs) also has a dynode, it allow the viewer ...

Concerning personal identity my position is similar to that of John Locke. I reject the idea that my personal identity is tied to my soul, as Cartesian theory suggested. I also do not believe that my personal identity is tied to my body. It seems more plausible to me that my personal identity is tethered to my memories because I am a culmination of my experiences. What I have endured, learned, and observed have made me into the person typing this. Memories are what have created my personal identity. My position on the mind and body problem, or that ...

Essay

Bacteria in a closed bioreactor grow and decay in four stages because they sterile culture of cells. It a bioreactor incorporates environmental conditions such as temperature, dissolved gases and nutrient concentration that integrate to help bacteria and eventually decaying. The underlying conditions make the bacteria to grow to maximum level. Since the bacteria is in a closed bioreactor, the underlying conditions become more as the maximum growth is attained thus leading to their decay.

Lag phase In the lag phase, growth and reproduction has just begun. Inoculum is the bacteria undergoing metabolism and the environmental conditions required include nutrient limitation, inhibitors, ...

A cell is a functional, structural and a biological unit in all living organisms. They are the smallest unit of life and can replicate independently. Living cells exist in both plants and animals. They have some fundamental requirements that enable to sustain themselves such as electron acceptors, electron donors an energy source and even a carbon source. Carbon in living cells and mostly plants is every vital for the plant cells. Plants intake carbon dioxide in the process of respiration and with the addition of water and energy obtained from sunlight, it makes glucose and produce oxygen gas. The formation of ...

Part A

How Enzymes Act As Protein Catalysts in Biochemical Processes Catalysis refers to the speeding up of a chemical reaction by a catalyst. A catalyst is a substance that accelerates a chemical reaction but does not undergo a permanent chemical change in the process. Enzymes are catalysts whose building blocks are amino acids: they are proteins. Enzymes also exhibit a defined three-dimensional structure. In addition, they have a cleft on their surface called active site. The active site is the region where substrate interactions take place. Enzymes play important roles in fructose metabolism. The first step of fructose metabolism in the liver is the phosphorylation of ...

Introduction

Q1 . The fundamental requirement for a living cell to sustain itself are a carbon source, an energy source, an electron donor, an electron acceptor and elemental nutrients(N,P, S, Mg,) etc. Explain how each of these fundamental requirements are needed by the living cell to function. Explain how the cell can maintain its own internal biological processes without being in equilibrium with the external environment. The living cells can function within a constricted range of such conditions such as nutrient availability, pH, ion, temperature, etc. The cell must coordinate different chemical reactions and consolidate many different molecules into definite structures, ...

Although Helium and Lithium only differ in one element, differ in their chemical and physical behavior. Helium is a noble gas which is found in group 18. Helium has only one electron shell which contains two electrons. The complete shell makes helium an inactive element and does not combine with other elements. Lithium, on the other hand, has three electrons meaning it has two shells. The first shell in lithium, has 2 electrons, and the second has only 1 electron. The second shell is not complete and therefore very active making lithium to combine readily with other elements. The free ...

A picture is worth a thousand words, definitely pictures can express human thoughts, emotions and dreams that can never be uttered by the lips. Back then, people can record physical appearance and historical events through paintings. On the other hand, a Frenchman named Joseph Niepce took the first permanent photograph in 1827 (Madgwick, 28). Photography made it easier for people to record history without resorting to paint the entire scenery that they see. Rich men and women, especially those who belong to the aristocracy choose photography for their personal portraits; adding a touch of modernism to their noble countenance. In short, the ...

***Your Name*** ***Institution***

The Sun has been with us for 4 billion years, and is the nearest star to the Earth. The Sun is comprised of about 74% of hydrogen, 25% of helium, and 1% of other elements. The surface of the Sun has a temperature of about 5800 K. The core of the Sun has a temperature ranging from 10 – 15 million Kelvin. This temperature range is high enough to activate nuclear fusion within the Sun. Here, four protons will fuse together to obtain a helium nucleus containing two protons and two neutrons via a proton-proton chain. The core of the ...

Business Case for Branching into Additive Manufacturing

Introduction Our company is a global conglomerate involved in manufacturing automobile and aircraft parts. Our products are of extremely high quality, and are used by major automobile and aircraft companies of the world. Components produced by our company are used by automobile and aircraft manufacturers when producing new cars and aircraft, and also as spare parts for maintenance. The aim of this brief would be to convince the Board of Directors of our company to open a production line using additive manufacturing so that the company remains abreast of technology and responsive to rapid changes in customer preferences.

Additive Manufacturing: Process in Brief

Additive ...

The sun is about 864000 miles wide and filled with sweltering hot gases. Hydrogen is the most abundant element present in the Sun, composition of the Sun by its constituent mass is 71% hydrogen (H), 27% helium (He) and 2% other heavier elements. Inside the Sun the gravitational pull compresses the gases, and increase the temperature and pressure at the core. (CAIN, F., 2009) The temperature is about 10000°F on the surface and more than 28 million degrees Fahrenheit at the core of the sun. The pressure at the core of the sun is 250 billion times the ...

Introduction 3

Background on Report 3 Current Technologies Photovoltaic (PV) Solar Technology 5 Concentrated Solar Power (CSP) 8 Solar Heating and Cooling (SCH) Technology 10 Analysis and Recommendation 11 Conclusion 12 Figures and Tables Figure 1: Diagram of a P-N junction in a Photovoltaic Cell 6 Figure 2: A Typical Parabolic Through CSP System 9 Figure 3: Wakiki Shore Apartments in Honolulu, Hawaii 11

Used in Contemporary Society

Introduction The use of fossil fuels results in combustion gases which contribute to global warming. Furthermore, these combustion gases result in air pollution which is detrimental to the ...

The work analyzed within the framework of this assignment is “Synthesis of magneto‑sensitive iron‑containing nanoparticles by yeasts” prepared by Vainshtein M., Belova N., Kulakovskaya T., Suzina N. and Sorokin V. It is dedicated to study of forming magneto-sensitive nanoparticles in the conditions of applied magnetic fields. In particular, the stimulation role of magnetic fields is investigated and tested. As a result, the works allows us to see results of magneto-sensitive nanoparticles biosynthesis by the help of yeasts.

Summary of the Methods and Achievements of the Work Reported

The second species considered, S. cerevisiae SUF was incubated using the medium with Fe(II)SO4 × 7H2O, 0.05. Inoculum took place ...

Education as a social phenomenon determines the development of human civilization, its progress or regress. The education system is a part of society, so society determines the objectives, content, form, and the whole concept of education; while at the same time affect its development. Currently, world focuses on the consistency of the educational and socio-economic development concepts (Anderson, Anderson, & Cherup, 2009). The observed global trend of sharp increase in the role of human factors in the development of post-industrial, information civilization, as well as national needs of society, the modernization and gradual integration into a single global community, make new, much higher ...

1. Introduction to the Technique Magnification and high resolution imaging are very important in materials science, especially at present when nanotechnology materials are being created. Magnification and high resolution imaging can help in the characterization, identification, and confirmation of the existence of the desired material. Magnification and high resolution imaging become problems when the size of the assessed material becomes too small; such as, they are beyond the micrometer scale. Ordinary techniques in microscopy such as light microscopy where in a traditional light microscope is used could not suffice. Fortunately, in 1931, two scientists named Ernst Ruska and Mx ...

Figure 1Mechanism of electron flow in solar cell 3 Figure 2 Structure of typical Photovoltaic solar cell 3 Figure 3 Types and efficiency of different PV cells 4 Figure 4: Laboratory scale efficiency associated with size of different PV cells in China 5 Figure 5 Working mechanism or Principle of Solar Cell (Rongqiang.2006) 6 Figure 6 Efficiency for different silicon cells having varying combinations 7 Figure 7: Pricing of different installed PV systems 9

Photovoltaics Solar Power

1. Introduction The sun has been seen for decades as the center of the universe instead of an ...

Analytical methods to evaluate seed dormancy in legumes

Abstract Legumes are known to have multiple health benefits. The seed coat in particular contains a number of bioactive compounds which possess antioxidant activity. Of great interest is the relationship between the chemical composition of the seed coat and its role in seed dormancy. Modern technological approaches are currently used to further identify these compounds and determine their role in seed development; these include NRIS FTIR, mass spectroscopy, electron microscopy and chromatography. The following review describes the constituents of the legume seed coat and their respective roles in dormancy and other stages of seed development. The review also highlights ...

Abstract

The purpose of this experiment was to characterize aldehydes and ketones using Tollen’s test and Iodoform test. It also aims to identify an unknown substance as well as determine whether glucose is an aldehyde or a ketone using the same tests. In order to achive these purposes, four test tubes where prepared for each type of test. For Tollen’s test, each of the tubes contained 1 drop of the analyte to which 1mL of the Tollen’s reagent was added. For the Idoform test, 4 drops of each substance was used, to which 2 mL of sodium hydroxide ( ...

(Study Programme)

Introduction

Physics remains a very useful field in the modern technological lives. Without physics, there would be very little understanding of how things work. Physics creates an understanding of the functioning mechanisms of the world and the different elements through such topics as kinetic energy, laws of motion, laws of gravity, mass, etc. Almost every aspect of people’s lives revolves around physics. Consequently, without physics, there wouldn’t be development such as lighting from electricity sources, motor-vehicles, electricity and so on. Physics is, therefore, an arm of science that involves the study of matter characteristics, energy and their ...

Abstract

The word technology may be in the talk of time for most individuals, however, little do they know what impacts all this development. The existence of visual systems, audio systems and other complex equipment all give credit to the early discoveries. Discovery of atoms, ions and later electrons simplified everything. It is from theses that energy was developed. One of the most promising techniques used by scientists is the charge to mass ratio of electrons. It helped in observing the nature of materials. This lab report aims at analyzing the Sir J. Thompson`s experiment of evaluating charge to ...